LEGRAND Raritan Smart Rack Controller User manual

SRC Quick Setup Guide 1

SRC_QSG_0A_3.5.10_E 255-80-0063-00 RoHS

Smart Rack Controller®

Thank you for purchasing Raritan's Smart Rack Controller (SRC). This product provides an ideal rack management solution which

features the following functions for data centers and server rooms:

Support for DX and DX2 environmental sensors, such as temperature and humidity sensors

Control and detection of a cabinet's door status (optional)

Asset management, which lists all IT devices

Important: Asset management feature and door handles (or SmartLock kit) are mutually exclusive. You cannot have both

devices connected simultaneously.

This Quick Setup Guide explains how to install and configure the SRC. For further details on using the SRC, access online help from

the application, or download the user guide from Raritan's

Support page

(

http://www.raritan.com/support/

). For more detailed

information on this release, see the latest release notes on the Support page.

Package Contents

The following lists the equipment shipped with SRC. If

anything is missing or damaged, contact the local dealer or

Raritan Technical Support for help.

One SRC device

Bracket pack and screws

Quick Setup Guide

Note: If you order any

Optional Accessories

(on page 1), they

are also shipped.

Optional Accessories

Part or all of the following equipment is shipped on demand

only.

Asset management strips and asset tags

Door handles or SmartLock kit

DX and/or DX2 environmental sensor package(s)

Warning: SRC does NOT support other Raritan

environmental sensor packages than DX and DX2 series.

QSRu le

Before You Begin

Prepare the installation site. Make sure the installation area

is clean and not exposed to extreme temperatures or

humidity. Allow sufficient space around the SRC for cabling

and equipment connections.

QSRu le

Rackmount

There are two ways to mount an SRC device, using the same

Raritan rackmount brackets.



1U Rackmount Method

(on page 1)

The SRC is mounted like a 1U device in the rack.



0U Rackmount Method

(on page 2)

The SRC is mounted like a 0U device in the rack.

1U Rackmount Method

To mount SRC like a 1U device:

1. Align the two edge slots of the L-bracket with two of the

screw holes on one end of the SRC device.

QUICK SETUP GUIDE

SRC Quick Setup Guide 2

SRC_QSG_0A_3.5.10_E 255-80-0063-00 RoHS

2. Screw the L-bracket to the device and ensure the bracket

is fastened securely.

3. Repeat Steps 1 to 2 to screw another L-bracket to the

other end of the device.

4. After both L-brackets are installed, fasten the device to

the rack, using rack screws, through two identical round

holes of each L-bracket.

QSRu le

0U Rackmount Method

To mount SRC like a 0U device:

1. Align the two round holes of the L-bracket with two of the

screw holes on the top of the SRC device.

2. Screw the L-bracket to the device and ensure the bracket

is fastened securely.

3. Repeat Steps 1 to 2 to screw another L-bracket to the

other end of the device.

4. After both L-brackets are installed, fasten the device to

the rack, using rack screws, through slots of each

L-bracket.

QSRu le

Connection Ports for Sensors, Door Handles, and

Assets

If you purchase

Optional Accessories

(on page 1), make sure

you connect them to the correct port on the SRC, or it is likely

damages may be caused to SRC and/or connected

accessories.

SRC models Connection

ports

Supported accessories

All models SENSOR port

(yellow)

Raritan's DX or DX2

sensors or actuatorsf

SmartLock kit (that is,

DX2-DH2C2)

Refer to "FEATURE 1"

below.

Models with

onboard door

handle ports.

For example,

SRC-0102.

Door handle

ports, and

contact closure

terminals

Raritan's door handles

Third-party contact

closure detectors

(optional)

Refer to "FEATURE 2"

below.

All models FEATURE port

(red)

Raritan's asset

management strips

Refer to "FEATURE 3"

below.

QSRu le

FEATURE 1: Support for DX and DX2

Environmental Sensors/Actuators

Raritan's DX or DX2 environmental sensor packages are

required for SRC to detect the surrounding condition like the

temperature, and/or to control a system or mechanism like

door handles.

SRC Quick Setup Guide 3

SRC_QSG_0A_3.5.10_E 255-80-0063-00 RoHS

Connecting Environmental Sensors (Optional)

An SRC provides the SENSOR port for connecting Raritan DX

or DX2 environmental sensor packages so that you can

remotely monitor environmental factors, such as temperature

and humidity, around the rack.

For sensor connection instructions, refer to the SRC User

Guide or Online Help.

For detailed information on each sensor package, refer to

the Environmental Sensors and Actuators Guide (or Online

Help) on Raritan website's

Support page

(

http://www.raritan.com/support/

If you need a Raritan sensor hub for connecting DX or DX2,

only DPX3-ENVHUB4 is supported by SRC.

QSRu le

FEATURE 2: Cabinet Access Control

Raritan's door handles or SmartLock kits are required for

SRC to control the access to a cabinet.

Depending on your SRC model, you may have to purchase

either only door handles or a full SmartLock kit from Raritan.

Raritan's SmartLock kit contains one DX2-DH2C2 and a pair

of door handles.

Note: For details, refer to the user documentation

accompanying the SmartLock kit or download it from

Raritan's

Support page

(

http://www.raritan.com/support/

To detect the cabinet's door status, you need to connect

third-party contact closure detectors, which are optional.

Important: It is not guaranteed that all third-party

detectors/switches are compatible with the SRC. You need

to test the compatibility after installing them.

Limitations

Read the restrictions below before connecting door handles

or a SmartLock kit (that is, DX2-DH2C2 kit) to SRC.

(IMPORTANT) NO asset management strips can be

connected simultaneously.

Up to one DX2-DH2C2 can be connected per SENSOR port

of SRC.

SRC-0100 supports a maximum of 2 door handles by

connecting one DX2-DH2C2.

SRC-0102 has two onboard door handle ports so it

supports a maximum of 4 door handles. You can

connect two door handles to onboard door handle

ports and connect one DX2-DH2C2 to its SENSOR port.

Only the door handles sold with DX2-DH2C2 are

supported.

No hot plugging or hot swapping with door handles when

they are directly or indirectly connected to a

powered

SRC.

That is, no connection or disconnection of door handles

when they are powered.

The maximum cabling length for door handles or

SmartLock kit is 29 feet (9 meters). For details, refer to

the following diagram.

Connecting a SmartLock Kit to DX2-DH2C2

You need a SmartLock kit if your SRC does NOT include a

built-in DX2-DH2C2, such as SRC-0100.

DX2-DH2C2 ports and terminals:

No. Component Function

Two pairs of Connect to third-party contact closure

SRC Quick Setup Guide 4

SRC_QSG_0A_3.5.10_E 255-80-0063-00 RoHS

No. Component Function

contact

closure sensor

terminals

detectors/switches for detecting the

door open/closed status.

Contact closure detectors are

OPTIONAL.

Two door

handle ports

Connect to the standard category cable

of the door handle.

The two door handles are usually

attached to different doors of the same

cabinet.

Two RJ-45

ports

Connect a standard network patch

cable for either or both purposes below:

Connect to the SENSOR port

(yellow) of the SRC.

Cascade DX2 sensor package(s).

Exception: You CANNOT cascade

DX2-DH2C2 packages.

Connection procedure:

1. Connect supported door handles to DX2-DH2C2.

2. (Optional) Connect contact closure detectors/switches for

detecting door status to DX2-DH2C2. For connection

details, refer to the Environmental Sensors and Actuators

Guide (or online help) on the

Support page

(

http://www.raritan.com/support/

3. Connect DX2-DH2C2 to the SENSOR port of SRC.

Connecting Raritan's Door Handles to SRC

You only need to purchase door handles if your SRC has a

built-in DX2-DH2C2, such as SRC-0102.

SRC door handle ports and terminals:

Numbers in the following diagram (and ) correspond to

the numbers in the previous section's table.

Connection procedure:

1. Connect Raritan door handles to onboard door handle

ports of SRC.

2. (Optional) Connect contact closure detectors/switches for

detecting door status to contact closure terminals of SRC.

QSRu le

FEATURE 3: Asset Management

Both asset management strips and asset tags are required for

SRC's asset management feature.

For documentation purpose, asset management strips are

called asset strips in the following sections.

Limitation: Do NOT connect door handles (or SmartLock

kit) to SRC while asset strips are being connected to SRC.

SRC Quick Setup Guide 5

SRC_QSG_0A_3.5.10_E 255-80-0063-00 RoHS

Introduction to Regular Asset Strips

Each tag port on the regular asset strips corresponds to a

rack unit and can be used to locate IT devices in a specific

rack (or cabinet).

For each rack, you can attach asset strips up to 64U long,

consisting of one MASTER and multiple SLAVE asset strips.

The difference between the master and slave asset strips is

that the master asset strip has an RJ-45 connector while the

slave does not.

The following diagram illustrates some asset strips. Note that

Raritan provides more types of asset strips than the diagram.

8U MASTER asset strip with 8 tag ports

8U SLAVE asset strip with 8 tag ports

5U "ending" SLAVE asset strip with 5 tag ports

Note: Unlike general slave asset strips, which have one DIN

connector respectively on either end, the ending slave asset

strip has one DIN connector on only one end. An ending asset

strip is installed at the end of the asset strip assembly.

QSRu le

Introduction to Asset Tags

You need both asset strips and asset tags for tracking IT

devices.

Asset tags provide an ID number for each IT device. The asset

tags are adhered to an IT device at one end and plugged in to

an asset strip at the other.

The asset strip is connected to the SRC, and the asset tag

transmits the ID and positioning information to the asset strip.

The following diagram illustrates an asset tag. Note that there

are two types of asset tags: non-programmable and

programmable tags. The only difference is that

programmable asset tags allow you to customize each tag's

ID or barcode number while non-programmable ones have

factory default ID or barcode numbers, which you cannot

change.

A Barcode (ID number), which is available on either

end of the "non-programmable" asset tag

B Tag connector

C Adhesive area with the tape

Note: The barcode of each "non-programmable" asset tag is

unique and is displayed in the SRC device's web interface for

identification.

QSRu le

Assembling Regular Asset Strips

Before connecting regular asset strips to the SRC, you must

assemble them.

To assemble regular asset strips:

1. Connect all regular asset strips up to 64U. For detailed

information, refer to the user documentation

accompanying Raritan asset strips.

a. The MASTER asset strip is installed as the first one in

the asset strip assembly.

b. All SLAVE asset strips are connected following the

MASTER asset strip.

c. The "ending" slave asset strip is installed as the final

one.

SRC Quick Setup Guide 6

SRC_QSG_0A_3.5.10_E 255-80-0063-00 RoHS

2. Vertically attach the asset strip assembly to the rack, next

to the IT equipment, making each tag port horizontally

align with a rack unit.

The asset strips are automatically attracted to the rack

because of magnetic stripes on the back.

QSRu le

Connecting Regular Asset Strips to SRC

SRC supports a cabling distance up to 10 meters for each

connected asset strip assembly.

To connect regular asset strips to SRC:

1. Affix the adhesive end of an asset tag to each IT device

through the tag's tape.

2. Plug the connector of each asset tag into the

corresponding tag port on the asset strip.

3. Connect the MASTER asset strip's RJ-45 connector to a

port labeled FEATURE on SRC, using a network patch

cable (CAT5e or higher).

(A) MASTER asset strip

(B) Asset tags

QSRu le

Other Types of Asset Strips

Raritan provides more types of asset strips than regular asset

strips, such as composite asset strips or blade extension

strips. For detailed information, refer to the user

documentation accompanying Raritan asset strips.

Composite asset strips:

A composite asset strip is named AMS-Mx-Z, where x is a

number, such as AMS-M2-Z or AMS-M3-Z.

A composite asset strip has two RJ-45 connectors but less

tag ports.

The composite asset strip is especially useful for tracking

large devices such as SAN boxes in the cabinet.

Composite asset strips can be daisy chained as shown

below.

Blade extension strips:

For blade servers, which are contained in a single chassis,

you can use a blade extension strip to track individual

blade servers.

A blade extension strip contains 4 to 16 tag ports. Below

shows a blade extension strip with 16 tag ports.

The blade extension strip is connected to a tag port on a

regular or composite asset strip via a Raritan's tag

connector cable.

QSRu le

Connecting SRC to Power

SRC supports redundant power with two inlets. See Product

Models.

SRC Quick Setup Guide 7

SRC_QSG_0A_3.5.10_E 255-80-0063-00 RoHS

You can connect only one or both inlets to proper power

sources.

1. Connect each SRC to an appropriately rated branch

circuit. Refer to the label or nameplate affixed to your SRC

for appropriate input ratings or range of ratings.

2. When a SRC powers up, it proceeds with the power-on self

test and software loading for a few moments.

3. When the software has completed loading, the front panel

display illuminates.

QSRu le

Connecting SRC to Your Network

SRC can be connected to a wired or wireless network.

To make a wired connection:

1. Connect a standard network patch cable to either or both

Ethernet ports on the SRC.

2. Connect the other end of the cable to your LAN.

Note: The "green" Ethernet port labeled "ETH 10/100/1000"

supports up to 1000 Mbps so it is highly recommended for

network connection. If connecting both ports to the LAN, you

must connect them to two "different" subnets. If you are not

sure whether the device is connected to the same or different

subnets, contact your IT department.

To make a wireless connection:

1. Connect an appropriate USB wireless LAN adapter to SRC.

2. Make sure the wireless LAN configuration is supported by

your SRC. See

Appendix B: Wireless LAN Information

(on page 8).

QSRu le

Using a Web Browser

Initial configuration using a web browser involves these two

steps.

Step 1: Retrieve the IP Address

(on page 7)

Step 2: Log in to the SRC Web Interface

(on page 7)

Step 1: Retrieve the IP Address

After connecting to a DHCP IPv4 network, an IPv4 address is

automatically assigned to your SRC. You can operate the front

panel display to retrieve the IPv4 address. See

Using the

Front Panel Display

(on page 7).

Tip: You can also retrieve the IPv4 address by connecting an

iOS or Android mobile device to SRC. See

Appendix A:

Configuration via a Mobile Device or PDView

(on page 8).

Using the Front Panel Display

The SRC front panel display is similar to the diagram below.

To retrieve the IP address:

1. Press or to show the "Main Menu."

2. Press or to select "Device Info," and press

3. Press or until the device's IP address is

displayed.

Step 2: Log in to the SRC Web Interface

The SRC supports common web browsers, including Microsoft

Internet Explorer®, Mozilla Firefox®, and Google®Chrome.

To access the SRC web interface:

1. Open a web browser and type the IP address of SRC.

2. Accept any security warnings that may appear.

3. Type the default user credentials and click Login.

User name: admin

Password: raritan

4. When prompted to change the password, change or ignore

it.

To change it, type the new password and click Ok.

To ignore it for this time only, click Not Now.

To ignore it permanently, select "Do not ask again" and

click Not Now.

It is highly recommended to change the default password.

Make sure the new password is noted down and kept in a

secure place.

Step 3: Configure SRC

After logging in to the SRC web interface, you can navigate the

left menu and then:

Choose Asset Strips for configuring connected asset

strips.

Choose Peripherals for configuring connected

environmental sensor packages.

Choose SmartLock for configuring connected door

handles or SmartLock kit.

SRC Quick Setup Guide 8

SRC_QSG_0A_3.5.10_E 255-80-0063-00 RoHS

Choose Device Settings > Date/Time to configure the SRC

with the proper date and time or synchronize it with an

NTP server. The SRC device's time must be in sync with

the LDAP server to use LDAP authentication.

Choose other menu commands for configuring user

profiles, privileges, securities, and more.

Note: Detailed instructions are available in the SRC online

help or user guide.

QSRu le

Appendix A: Configuration via a Mobile Device or

PDView

An iOS or Android mobile device, such as a smartphone or

tablet, can function as a local display of SRC. Note that the

Android device must support USB "On-The-Go" (OTG), or this

function does not work.

Step 1: Download the "PDView" App

Raritan's app "PDView" is required for the mobile device to

function as a local display. It is a free app.

To download PDView:

1. Visit either Apple App or Google Play Store.



https://itunes.apple.com/app/raritan-pdview/id780382

738



https://play.google.com/store/apps/details?id=com.rar

itan.android.pdview

2. Install PDView.

Step 2: Connect the Mobile Device to SRC

The USB cable and USB port to connect are determined by

your mobile operating system.

To connect your mobile device to SRC:

1. Get an appropriate USB cable for your mobile device.



iOS

: Use the regular USB cable shipped with your iOS

mobile device.



Android

: Use an USB OTG adapter cable.

2. Connect the mobile device to the appropriate USB port on

the SRC.



iOS

: USB-A port.



Android

: USB-B port

Step 3: Launch PDView

You can access the SRC web interface via PDView to view or

change the settings.

To access the SRC web interface:

1. Launch PDView on your mobile device.

2. Wait until PDView detects the connected SRC and shows

the word "Connected" in green.

3. If the factory-default user credentials "admin/raritan"

remain unchanged, PDView automatically logs in to the

web interface of SRC.

If they have been changed, the login screen displays

instead and you must enter appropriate user credentials

for login.

4. (Optional) For initial login, you are prompted to change the

password. See

Step 2: Log in to the SRC Web Interface

(on page 7).

5. Now you can view the data or change any SRC settings.

For details, refer to the user guide or online help on

the Raritan website.

QSRu le

Appendix B: Wireless LAN Information

USB Wireless LAN Adapters

The SRC supports the following USB Wi-Fi LAN adapters.

Wi-Fi LAN adapters Supported 802.11

protocols

SparkLAN WUBR-508N A/B/G/N

Proxim Orinoco 8494 A/B/G

Zyxel NWD271N B/G

SRC Quick Setup Guide 9

SRC_QSG_0A_3.5.10_E 255-80-0063-00 RoHS

Wi-Fi LAN adapters Supported 802.11

protocols

Edimax EW-7722UnD A/B/G/N

TP-Link TL-WDN3200 v1 A/B/G/N

Raritan USB WIFI A/B/G/N

Connecting the Wireless LAN Adapter

You can connect the wireless LAN adapter either to SRC or to

a USB hub attached to SRC.

To make a wireless connection:

Do one of the following:

Plug a supported USB wireless LAN adapter into the

USB-A port on your SRC.

Connect a USB hub to the USB-A port on the SRC.

Then plug the supported USB wireless LAN adapter

into the appropriate USB port on the hub.

Supported Wireless LAN Configuration

If wireless networking is preferred, ensure that the wireless

LAN configuration of your SRC matches the access point. The

following is the wireless LAN configuration that the SRC

supports.

Network type: 802.11 A/B/G/N

Protocol: WPA2 (RSN)

Key management: WPA-PSK, or WPA-EAP with PEAP

and MSCHAPv2 authentication

Encryption: CCMP (AES)

Tip: Supported 802.11 network protocols vary according to

the wireless LAN adapter being used with the SRC. See

USB Wireless LAN Adapters

(on page 8).

Note: You must configure SRC to enable its wireless LAN

interface. See the topic titled Configuring Network

Settings in the User Guide.

QSRu le

Appendix C: More Information

Additional Information

For more information about SRC and the entire Raritan product line, see

Raritan's website (www.raritan.com). For technical issues, contact Raritan

Technical Support. See the Contact Support page in the Support section on

Raritan's website for technical support contact information worldwide.

Raritan's products use code licensed under the GPL and LGPL. You can request

a copy of the open source code. For details, see the Open Source Software

Statement at

(http://www.raritan.com/about/legal-statements/open-source-software-statem

ent/) on Raritan's website.

RJ-45 Cap in the EXPANSION Port

SRC has a cap plugged into its EXPANSION port when

shipping out of the factory. This port is reserved for future use

and does NOT function. It is suggested to keep the cap

plugged continuously.

Table of contents

Other LEGRAND Controllers manuals

LEGRAND

LEGRAND 0 784 48 User manual

LEGRAND

LEGRAND 0 673 69 User manual

LEGRAND

LEGRAND Adorne LC7001 User manual

LEGRAND

LEGRAND Raritan SRC-0100 User manual

LEGRAND

LEGRAND Celiane 670 89 User manual

LEGRAND

LEGRAND Wattstopper DLM LMJA-8 Series User manual

LEGRAND

LEGRAND adorne WNAL33/43 User manual

LEGRAND

LEGRAND ALPTEC 5.2 User manual

LEGRAND

LEGRAND 0 663 36 User manual

LEGRAND

LEGRAND 784 28 User manual

LEGRAND

LEGRAND ON-Q LC6400 User manual

LEGRAND

LEGRAND Radiant WNRCB40 User manual

LEGRAND

LEGRAND 0 026 72 User manual

LEGRAND

LEGRAND radiant WNRCB40WH User manual

LEGRAND

LEGRAND BTICINO MYHOME F411U2 User manual

LEGRAND

LEGRAND radiant WZ3RCB40 User manual

LEGRAND

LEGRAND Raritan SRC-0100 User manual

LEGRAND

LEGRAND Adorne LC7001 User manual

LEGRAND

LEGRAND 0 488 51 User manual

LEGRAND

LEGRAND Celiane Series Quick start guide

LEGRAND

LEGRAND Valena Allure Series User manual

LEGRAND

LEGRAND 0 884 12 User manual

LEGRAND

LEGRAND Wattstopper DCLV2 User manual

LEGRAND

LEGRAND 038 09 Quick start guide

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual