LEGRAND 026 21 User manual

87045 LIMOGES Cedex

Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88

Technical data sheet: F00983EN/00

Catalogue number(s): 026 21

Updated on: Created on: 20/12/2010

1/3

Controller - 1 x 1000 W output with

dimming - All loads

CONTENTS

1. USE

This device is a power unit used for managing lighting loads.

The load(s) can be controlled locally either manually or by SCS

commands associated with it (them). They can also be controlled

automatically by digital detectors.

The use of SCS commands and digital detectors requires an SCS

power supply and an addressing module* to be wired on the BUS.

* The addressing module is not necessary if the installation is

equipped with the software packs.

2. TECHNICAL FEATURES

CONTENTS Page

1. Use ............................1

2. Technical features ................1

3. Overall dimensions................2

4. Connection ......................2

5. Parameter setting.................3

6. Operation .......................3

7. Maintenance.....................3

8. Standards .......................3

230 V~ 1000 W 4.3 A 1000 W 4.3 A 1000 VA 4.3 A 1000 VA 4.3 A

110 V~ 500 W 500 W 500 VA 500 VA

1 2 3 4

1Incandescent bulbs

2Tungsten halogen bulbs

3Tungsten halogen bulbs with ferromagnetic transformer

4Tungsten halogen bulbs with separate electronic transformer

Number of supply terminal blocks 1

Number of load terminal blocks 1

Connection terminals

Terminal types screw

Terminal capacity 2 x 2.5 mm2

Number of RJ 45 1

Mains voltage 100-240 V~

Frequency 50/60 Hz

Location category Internal

Degree of protection

Penetration by solid

and liquid matter

IP20

(installation in an enclosure)

Impact resistance IK04

Number of modules 6

Usage temperature -5°C to +45°C

Storage temperature -20°C to +70°C

No load power consumption 0.3 W

Weight 327 g

2. TECHNICAL FEATURES (continued)

LEARN indicator:

indicates the teach

phase or RESET

Indicator

(on if output

activated)

Configurator

Control

button

LEARN button

SCS BUS connection

(RJ 45)

CAUTION:

Do not combine on

the same channel

Only one transformer for use with an electronic switch must be used.

Catalogue number(s): 026 21

Controller - 1 x 1000 W output with

dimming - All loads

Technical data sheet: F00983EN/00 Updated on: Created on: 20/12/2010

2/3

CONTENTS

2. TECHNICAL FEATURES (continued)

BUS wiring:

RJ 45 cord or cable or BUS/SCS cable to be fitted with RJ 45

connector ( 500 m max. cord or BUS/SCS cable between the

power supply and the furthest product).

Peripherals compatible with the offer:

- Digital detectors: infrared, ultrasound or dual technology

- Pushbutton lighting controls

- Switch multifunction controls

- Scenario management

4. CONNECTION

All the wiring must be carried out with the mains power off.

3. OVERALL DIMENSIONS

108

Catalogue number(s): 026 21

Controller - 1 x 1000 W output with

dimming - All loads

Technical data sheet: F00983EN/00 Updated on: Created on: 20/12/2010

3/3

CONTENTS

6. OPERATION (continued)

Manual forcing of the type of load

7. MAINTENANCE

Do not use: acetone, tar-removing cleaning agents or

trichloroethylene.

Maintenance with the following products: - Hexane (En 60669-1)

- Methylated spirit

- Soapy water

- Diluted ammonia

- Bleach diluted to 0%

- Window-cleaning products

8. STANDARDS

Directive: CE

Installation standards: NFC 15-100

Product standards: IEC 60669-2-1

Environmental standards:

- EU Directive 2002/96/EC:

WEEE (Waste Electrical and Electronic Equipment)

- EU Directive 2002/95/EC:

RoHS (Restriction of Hazardous Substances)

- Regulations: ERP (public buildings)

ERT (workplace buildings)

IGH (high-rise buildings)

ATTENTION: An initial test is required for the use of other special

maintenance products.

5. PARAMETER SETTING

Configuration of the product in a system:

- Manual, using the Push and Learn method

- Virtual, via software packs

- Physical, via configurators

Consult the relevant technical data sheets for detailed parameter

setting of digital detectors that are compatible with the offer

6. OPERATION

By default, the product automatically recognises the load as soon as

the channel concerned is activated.

In certain cases, this recognition does not take place.

This function can be forced manually.

Display of the type of load

Load status indicator

2 indicators displaying load 1 status

: OFF load

: ON load (1% to 100%)

: Load short-circuit fault

Load type indicator

Control buttons

ON/+ load command:

Short press: ON

Long press: Dim+

OFF/- load command:

Short press: OFF

Long press: Dim-

Note: All technical information is available at

www.legrandoc.com

10 s = confirmation

< 1 s = exit forcing

mode without

saving

< 1 s = ON

< 1 s

Capacitive

Inductive

Forced

inductive

Forced

capacitive

Inductive

Capacitive

Load status

indicator

Load type

indicator

< 1 s

Other LEGRAND Controllers manuals

LEGRAND

LEGRAND 5739 12 Instruction Manual

LEGRAND

LEGRAND Raritan SRC-0100 User manual

LEGRAND

LEGRAND Wattstopper DCLV2 Service manual

LEGRAND

LEGRAND adorne WZ3ACB40 User manual

LEGRAND

LEGRAND airQast User manual

LEGRAND

LEGRAND 488 43 User manual

LEGRAND

LEGRAND Sagane 846 40 User manual

LEGRAND

LEGRAND 0 698 74L User manual

LEGRAND

LEGRAND Arteor 5 742 74 User manual

LEGRAND

LEGRAND Wattstopper LMPL-201 User manual

LEGRAND

LEGRAND Celiane Series Quick start guide

LEGRAND

LEGRAND radiant WZ3RCB40 User manual

LEGRAND

LEGRAND ADMHRM4 User manual

LEGRAND

LEGRAND 784 28 User manual

LEGRAND

LEGRAND radiant User manual

LEGRAND

LEGRAND 0 488 51 User manual

LEGRAND

LEGRAND BTICINO MYHOME F411U2 User manual

LEGRAND

LEGRAND FSIR-100 User manual

LEGRAND

LEGRAND 0 663 36 User manual

LEGRAND

LEGRAND 0 883 27 User manual

LEGRAND

LEGRAND 0 484 22 User manual

LEGRAND

LEGRAND Adorne LC7001 User manual

LEGRAND

LEGRAND PRO 21 7756 22 User manual

LEGRAND

LEGRAND 0 884 06 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual