LEGRAND EasyIP VADDIO PCC User manual

Document Number 411-0068-31 Rev B – October 2023

Installation Guide for the

EasyIP PCC and PCC Mini

Four-Camera Joystick Controllers

Overview

This guide provides information about:

nEasyIP PCC four-camera joystick controller, 999-57755-000 (worldwide)

nPCC Mini four-camera joystick controller, 999-57750-000 (worldwide)

About this guide

This guide covers:

nControls and connections

nTips for a successful installation

nConnection diagram

nEquipment power-on

Complete product information is available in the Complete Manual

for the EasyIP PCCFour-Camera Joystick Controller.

Features

nSimple control of up to four cameras:

oEasyIP PCC for EasyIP cameras

oPCC Mini for other Vaddio cameras

nThree-axis Hall effect joystick

nIlluminated pushbuttons for camera selection

nWeb interface for operation and administrative control

nUse with the Vaddio Device Controller or manage from your PC

nYour EasyIP Switch powers the EasyIP PCC; a PoE+ mid-span power injector powers the PCC Mini

A quick look at the camera controller

The EasyIP PCC and PCC Mini look identical except for the model information.

Camera buttons (lower row)– Select the camera to use for the next shot (the preview camera). The

buttons are only illuminated if they are assigned to cameras.

Preset buttons (upper row) – Use these buttons to select presets 1 through 4 on the selected preview

camera. The buttons are only illuminated if the corresponding presets have been stored on the camera.

Joystick – Left/right to pan, forward/back to tilt, twist to zoom.

Kensington lock slot – Keep your joystick from adventuring away into the wide, wonderful world.

PoE+ Gigabit Ethernet port – Power and network connectivity, including access to cameras.

Courtesy HDMI output – Video from the camera you are currently controlling.

IP button – Press to overlay the device's IP address on the HDMI video output display.

Installation Guide for the EasyIP PCC Four-Camera Joystick Controller

Installation

This section covers how to install and connect the product. It also provides safety information and other

guidance related to installing the product.

Note

This product is intended for installation and use only in environments where all RS-232 and PoE/PoE+

connections originate within the building.

Or in UL's preferred phrasing...

PoE-type networks connected to this equipment are for intra-building use only and should not

be connected to lines that run outside the building in which this product is located.

Don’t void your warranty!

Caution

This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate

protective enclosure. Do not allow it to come into contact with any liquid.

Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of

these things happen, return it to Vaddio for safety and functional testing.

Cabling notes

Best practices for making cables:

nUse Cat-5e or better cable. We recommend shielded cabling if the cables will be coiled,

run tightly with other cables, or placed close to sources of electromagnetic interference

such as power lines or fluorescent light fixtures.

nUse high-quality standard RJ-45 connectors; 568B termination recommended.

nUse a high-quality crimping tool.

Caution

When building cables for Vaddio products, do not use pass-through RJ-45 connectors. If

they are crimped incorrectly, they can cause intermittent connections and degrade

signal quality. Incorrectly crimped pass-through connectors can also damage the

connectors on the product, which will void your warranty.

Intact – will make reliable contact

with the cable connector

Damaged – Bent contact fingers

will NOT make reliable contact

with the cable connector

Caution

Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in

equipment damage and will void the warranty.

Pro tip

To prevent tragic mishaps, label both ends of every cable.

Installation Guide for the EasyIP PCC Four-Camera Joystick Controller

Basic connections

Because the EasyIP PCC and PCC Mini are for different environments, the connections are different.

Connecting the EasyIP PCC controller

The EasyIP PCC connects to the EasyIP Switch that powers the rest of the EasyIP installation. A Vaddio

Device Controller provides access to the web interfaces of all the EasyIP products connected to the

switch.

Installation Guide for the EasyIP PCC Four-Camera Joystick Controller

Connecting the PCC Mini controller

The PCC Mini connects to the network via a PoE+ mid-span power injector. A Vaddio Device Controller

provides access to Vaddio products on the same subnet.

Ensuring compatibility

The controller may be unable to communicate with Vaddio cameras if their firmware is out of date. When

you set up the controller, be sure the associated cameras have been updated to the latest firmware.

Powering up

When you power up the device for the first time, you will need to access the web interface to configure it

for operation.

Next steps

The joystick controller is now ready to configure. Until the product is configured, it is not functional. Refer

to the Complete Manual for the EasyIP PCC and PCC Mini Four-Camera Joystick Controllers.

Installation Guide for the EasyIP PCC Four-Camera Joystick Controller

Vaddio is a brand of Legrand AV Inc. · www.legrandav.com · Phone 800.572.2011 / +1.763.971.4400 · Email Europe, Middle East,

Africa: [email protected] · All other regions: [email protected]

Vaddio is a registered trademark of Legrand AV Inc. All other brand names or marks are used for identification purposes and are

trademarks of their respective owners. All patents are protected under existing designations. Other patents pending.

Operation, storage, and care

For smears or smudges on the product, wipe with a clean, soft cloth. Do not use any abrasive chemicals.

Keep this device away from food and liquids.

Do not operate or store the device under any of the following conditions:

nTemperatures above 40°C (104°F) or below 0°C (32°F)

nHigh humidity, condensing or wet environments

nInclement weather

nSevere vibration

nCorrosive atmosphere

nDry environments with an excess of static discharge

nAs a shield while dueling (the dimensions are all wrong for that)

Do not attempt to take this product apart. There are no user-serviceable components inside.

Installation Guide for the EasyIP PCC Four-Camera Joystick Controller

Other manuals for EasyIP VADDIO PCC

This manual suits for next models

Table of contents

Other LEGRAND Controllers manuals

LEGRAND

LEGRAND adorne WZ3ACB40 User manual

LEGRAND

LEGRAND 0 673 69 User manual

LEGRAND

LEGRAND DRD9 User manual

LEGRAND

LEGRAND Tynetec ZXT473 User manual

LEGRAND

LEGRAND adorne WNACB40 User manual

LEGRAND

LEGRAND 0 883 27 User manual

LEGRAND

LEGRAND EasyIP VADDIO PCC User manual

LEGRAND

LEGRAND 5739 12 Instruction Manual

LEGRAND

LEGRAND Wattstopper DCLV2 Service manual

LEGRAND

LEGRAND 0 675 97 User manual

LEGRAND

LEGRAND LE00282AC User manual

LEGRAND

LEGRAND Wattstopper LMJA-8125-SM User manual

LEGRAND

LEGRAND 038 09 Quick start guide

LEGRAND

LEGRAND Wattstopper LMPL-201 User manual

LEGRAND

LEGRAND 288 12 User manual

LEGRAND

LEGRAND 0 766 22 User manual

LEGRAND

LEGRAND PRO 21 7756 22 User manual

LEGRAND

LEGRAND 488 43 User manual

LEGRAND

LEGRAND Wattstopper LMRC-221 User manual

LEGRAND

LEGRAND 0 035 40 User manual

LEGRAND

LEGRAND Pass & Seymour RFP User manual

LEGRAND

LEGRAND Adorne LC7001 User manual

LEGRAND

LEGRAND 5739 04 Instruction Manual

LEGRAND

LEGRAND 0 676 46 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual