LEGRAND C2G 29977 User manual

6500 Poe Avenue

Dayton, OH 45414

Phone 800.293.4970

www.c2g.com

Specifications

CPU

Intel Celeron J1800 Processor, @ 2.41GHz 4 cores

Memory

2GB DDR3

Display

Integrated Intel HD Graphics, 1x HDMI and 1x VGA

Keyboard and Mouse

USB keyboard and mouse (not required and not included)

Peripherals

• USB 2.0 ports (3x)

• SS USB 3.0 port (1x)

• Network gigabit interface (2x)

• VGA Video out port (1x)

• HDMI Video out port (1x)

• Audio in via 3.5mm port (1x)

• Audio out via 3.5mm port (1x)

• RS232 port (1x)

Operating System

Ubuntu 18.04 LTS

Temperature/Humidity

Operating: 0 ºC to 50 ºC, Storage: -20 ºC to 80 ºC

Humidity: 10% to 90% (non-condensing)

Dimensions

5.24 x 5.00 x 1.38 inch (133 x 127 x 35 mm)

Weight

1.5lbs (0.7kg)

Accessories Included

External 12VDC @ 2A Power Adaptor

Regulatory

FCC, CE, RoHS, WEEE

Order Information

29977 Network Controller for 4K HDMI over IP

Please download the complete 29977 Network Controller for 4K HDMI over IP product

operation manual from the C2G web site (at www.cablestogo.com).

Network Controller for

4K HDMI® over IP (29977)

Quick Start Guide

Overview

The C2G Network Controller for 4K HDMI over IP (29977) is a Linux-based PC that allows

users to control hub-installed C2G products via an Ethernet Web interface.

When installed on a local area network (LAN), the C2G Network Controller will scan the

LAN for connected C2G products allowing the user to auto-discover, configure and control

these products through an Ethernet Web interface.

Applications

Application is for control of the C2G Audio/Video over IP product line. The Network

Controller can be used to implement a virtual matrix, splitter, video wall and other

configurations over IP.

Installation

1. Connect the Ethernet LAN 1 port of the Network Controller to the Ethernet switch and

then apply power to the unit (the Ethernet LAN 1 port should be connected before

applying power). Turn on the Power Switch. Note that LAN 2 port is configured as a

DHCP client and can be utilized for control purpose.

2. The unit will go through a power-up sequence.

3. With the use of a computer and a browser, connect to the Network Controller web

page.

The default IP address is: 192.168.168.50

The computer will need to be on the same local IP network segment.

If the unit is configured in DHCP mode, then the IP address will be assigned by the

DHCP/network server. Check with an IT administrator for available IP addresses.

4. The next and final step is to setup and configure the Network Controller via the

controller web interface. In order to accomplish this, navigate to the C2G web site (at

www.cablestogo.com) and download the 29977 Network Controller for 4K HDMI over

IP product manual. The manual will provide the necessary instructions to complete

the remaining system setup and configuration.

C2G Warranty

At C2G we want you to be totally confident in your purchase.

That is why we offer a warranty on this device. If you experience

problems due to workmanship or material defect for the duration

of this warranty, we will repair or replace this device.

To request a Return Merchandise Authorization (RMA) number,

contact customer service at C2G.em[email protected].com.

Application Diagram

Troubleshooting

The following table describes some of the symptoms, probable causes and possible solutions

in regard to the installation of the C2G Network Controller.

Also, please download and read the latest 29977 Network Controller for 4K HDMI over IP

product manual from the C2G web site.

Symptom

Probable

Cause

Possible

Solution

No power LED

No power to the unit

Verify that the power supply is connected to the

unit, and that the AC adaptor is connected to

the power source. Also press the Power button

ON.

Unable to connect to

web page

Bad network cable

or wrong IP address

The controller and host computer need to be in

the same local IP network to be able to

communicate. Also try replacing the network

cable with a new one.

Unable to connect to

web page

Unknown IP address

Connect a monitor to the controller and check the

controller IP address displayed on the monitor

for both the LAN 1 and LAN2 ports. The LAN 1

port is the one required for normal operation.

Make sure the LAN 1 port is connected to the

same network as the AV over IP devices.

If IP address is not shown, then make sure the

Ethernet cable is good and properly connected

to the LAN 1 port, and then reboot the unit by

cycling the AC power.

Other manuals for C2G 29977

Other LEGRAND Controllers manuals

LEGRAND

LEGRAND 672 40 User manual

LEGRAND

LEGRAND 0 026 72 User manual

LEGRAND

LEGRAND Mosaic User manual

LEGRAND

LEGRAND Axiom User manual

LEGRAND

LEGRAND Raritan SRC-0100 User manual

LEGRAND

LEGRAND 0 677 886L User manual

LEGRAND

LEGRAND HD4657M3 User manual

LEGRAND

LEGRAND LE00282AC User manual

LEGRAND

LEGRAND 0 648 84L User manual

LEGRAND

LEGRAND 026 21 User manual

LEGRAND

LEGRAND Wattstopper LMPL-201 User manual

LEGRAND

LEGRAND Arteor User manual

LEGRAND

LEGRAND 3550 User manual

LEGRAND

LEGRAND 0 663 37 User manual

LEGRAND

LEGRAND 0 673 69 User manual

LEGRAND

LEGRAND Pass & Seymour LightSense PSHCF User manual

LEGRAND

LEGRAND 4 238 40 User manual

LEGRAND

LEGRAND Raritan Smart Rack Controller User manual

LEGRAND

LEGRAND Wattstopper LMRC-611MCC User manual

LEGRAND

LEGRAND C2G 29977 User manual

LEGRAND

LEGRAND 038 09 Quick start guide

LEGRAND

LEGRAND 0 663 35 User manual

LEGRAND

LEGRAND Adorne LC7001 User manual

LEGRAND

LEGRAND radiant User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual