Ledj S-1 User manual
www.prolight.co.uk
(Order code: LEDJ126)
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused
by the non-observance of this manual or any unauthorised modication to the
equipment.
• Never let the power-cable come into contact with other cables. Handle the
power-cable and all mains voltage connections with particular caution!
• Never remove warning or informative labels from the equipment.
• Do not open the equipment and do not modify the equipment.
• Do not switch the equipment on and off in short intervals, as this will reduce the
system’s life.
• Only use the equipment indoors.
•Donotexposetoammablesources,liquidsorgases.
• Always disconnect the power from the mains when equipment is not in use or before
cleaning! Only handle the power-cable by the plug. Never pull out the plug by pulling
the power-cable.
• Make sure that the available voltage is between 220v/240v.
• Make sure that the power-cable is never crimped or damaged. Check the equipment
and the power-cable periodically.
• If the equipment is dropped or damaged, disconnect the mains power
supply immediately.
Haveaqualiedengineerinspecttheequipmentbeforeoperatingagain.
•Iftheequipmenthasbeenexposedtodrastictemperatureuctuation(e.g.after
transportation), do not switch it on immediately. The arising condensation might
damage the equipment. Leave the equipment switched off until it has reached room
temperature.
• If your product fails to function correctly, discontinue use immediately. Pack the unit
securely(preferablyintheoriginalpackingmaterial),andreturnittoyourProlight
dealer for service.
• Only use fuses of same type and rating.
•Repairs,servicingandpowerconnectionmustonlybecarriedoutbyaqualied
technician. THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
• WARRANTY; One year from date of purchase.
OPERATING DETERMINATIONS
If this equipment is operated in any other way, than those described in this manual,
the product may suffer damage and the warranty becomes void.
Incorrect operation may lead to danger e.g.: short-circuit, burns, electric shocks,
lamp failure etc.
Do not endanger your own safety and the safety of others!
Incorrect installation or use can cause serious damage to people and property.
Over view:
Front:
Rear:
Features:
7 Preset colour buttons for instant colour selection.
6 Buttons for colour jump, colour fade, auto, sound, DMX and blackout.
Sound active function with adjustable sensitivity.
Blackout,ood&strobefunctions.
1, Blackout mode:
When you power up your S-1 controller, the LED above the “BLACKOUT” button will illuminate,
indicating that the unit is set to blackout mode. To exit the blackout mode simply press any one of
the function buttons.
2, Preset colour mode
In this mode you can select one of the seven preset colours by pressing one of the designated
colour buttons. Or when in DMX mode you can use the “MACRO COLOUR MIX” slider to select
static colours.
3, DMX mode
Toactivatethismoderstpressthe‘DMX” button. You can now use any of the 6 designated
sliders to control the Stratos Spot or Wash in conjunction with the 3 and 6 Channel DMX charts
overleaf.
4, Sound Active mode
To activate this mode, press the “SOUND” button. You will need to adjust the “FLASH/SPEED/
SENS” slidertosetthemusicinputsensitivitylevel.(00=low,99=high).
5, Colour Fade mode
To activate this mode, press the “COLOUR FADE” button, then adjust the speed to the desired
level using the “FLASH/SPEED/SENS” slider(00=slow,99=fast).Thismodeisidealforwalland
up/down lighting to create different mood effects in bars, restaurants and shops etc.
6, Colour Jump mode
To activate this mode press the “COLOUR JUMP” button, then adjust the speed to the desired
level by using the “FLASH/SPEED/SENS” slider(00=slow,99=fast).Theunitwillnowchange
through its built-in preset colours.
7, Auto Run mode
To activate this mode press the “AUTO” button, then adjust the speed to the desired level by
using the “FLASH/SPEED/SENS”” slider(00=slow,99=fast).Theunitwillnowrunthroughits
built-in programmes.
Specications
Powersupply:DC9-12V500mAMin.
Dimensions:269x145x65mm
Weight: 1.1Kgs
DMX Charts:
The Stratos Spot/Wash has two DMX modes to choose from, 3 channel or 6 Channel.
To control the unit in 3 Channel mode, press the mode button on the
StratosSpotorWashtoshowareddotilluminatedundertherst
digit of the DMX address.
The unit can now be controlled in 3 channel mode
To control the unit in 6 Channel mode, press the mode button on the
Stratos Spot or Wash to show to show NOreddotundertherst
digit of the DMX address.
The unit can now be controlled in 6 channel mode
Notes:
This manual suits for next models
1
Table of contents
Other Ledj Lighting Equipment manuals
Ledj
Ledj LEDJ283A User manual
Ledj
Ledj Libretto Mini RGBAL Profile User manual
Ledj
Ledj SPECTRA BATTEN12T3 EXTERIOR User manual
Ledj
Ledj HEX Par 9 User manual
Ledj
Ledj Slimline 12Q5 Series User manual
Ledj
Ledj BlockBuster 6 User manual
Ledj
Ledj STRATOS SPOT User manual
Ledj
Ledj STAR18 User manual
Ledj
Ledj RGB DMX User manual
Ledj
Ledj Stage Par CZ200 Dual White User manual
Ledj
Ledj LEDJ225 User manual
Ledj
Ledj LEDJ162 User manual
Ledj
Ledj LED-56 User manual
Ledj
Ledj SPECTRA PAR 7T3 User manual
Ledj
Ledj LEDJ254 User manual
Ledj
Ledj LEDJ377 User manual
Ledj
Ledj HBR 1D User manual
Ledj
Ledj Stage Par CZ 120 RGBA User manual
Ledj
Ledj Slimline Q5 Series User manual
Ledj
Ledj Libretto Mini WW Profile User manual
Popular Lighting Equipment manuals by other brands
Qazqa
Qazqa Suplux SL 3 Black 103062 instruction manual
Commercial Electric
Commercial Electric 54568141 Use and care guide
CREE LIGHTING
CREE LIGHTING 304 Series installation instructions
Goobay
Goobay 49867 user manual
ECOMAN ITALIA
ECOMAN ITALIA LED T8 instruction manual
Alkalite
Alkalite Krypton KT-81 user manual
