LaserLiner ThermoSpot User manual

ThermoSpot

Laser

650 nm

12 m

Laser-Focus

ø 1 m

12:1

2. 1.

1 2 3

Read the operating instructions and the enclosed brochure

„Guarantee and additional notices“ completely. Follow the

instructions they contain. This document must be kept in a

safe place and if the laser device is passed on, this document

must be passed on with it.

Be sure to pay

attention to polarity.

– Attention: Do not look into the direct or reected beam.

– The laser may not get into the hands of children!

– Do not point the laser beam towards persons.

– If a person‘s eyes are exposed to class 2 laser radiation, they

should shut their eyes and immediately move away from the beam.

– Do not expose the device to mechanical stress, extreme temperatures,

moisture or signicant vibration.

– The device must only be used in accordance with its intended purpose

and within the scope of the specications. Modications or changes to

the device are not permitted, this will otherwise invalidate the approval

and safety specications.

General safety instructions

Laser radiation!

Do not stare into the beam!

Class 2 laser

< 1 mW · 650 nm

EN 60825-1:2007-10

ThermoSpot

°C / °F

ThermoSpot

Laser beam switched on

Battery charge

Hold function

Measured value display

Max. value during the measurement

Display lighting

Unit of measurement °C / °F

Continuous measurement / Hold

To set the required temperature unit,

press and hold the „°C/°F“ button until

the corresponding symbol appears on

the display.

For continuous measurement

activate the laser (see gure)

and keep the button pressed.

Release the button as soon as

the laser circle pinpoints the

measurement location. The

measured value is held.

Measurement procedure notice

This infrared temperature instrument detects the temperature of various

surfaces and materials. A built-in sensor head detects the material-specic

infrared rays emitted by every object. The amount of these emissions is

determined by the material‘s emission coefcient (0 ... 1). This instrument

is permanently set to an emission coefcient of 0.95, which is applicable

to most organic materials as well as plastics, ceramics, wood, rubber and

stone. Please ensure that the space between the instrument and surface

to be measured is free of disturbances (steam, gas, contamination, glass).

Laser circle

The laser circle is a targeting aid to

sight the location for the infrared

measurement. Temperature mea-

surement is only performed on

the surface within the laser circle.

Laser output

Laser warning message

ThermoSpot

Technical data Technical revisions reserved. 06.15

Measurement range -38°C … 365°C (-36.4°F … 689°F)

Accuracy

± 2.5°C + 0.05°C / degree

(-38°C … 0°C)

± 2.5°C (0°C … 365°C) or

± 2.5 % whichever value is greater

Optic 12:1 (distance : measured spot)

Resolution 0.2 °C

Emission coefficient 0.95

Laser wavelength 650 nm

Laser type Laser class 2, < 1 mW

Operating temperature 0°C … 50°C

Storage temperature -10°C … 60°C

Relative humidity 20% rH … 80% rH, no condensation

Power supply 2 x 1.5V alkaline batteries (type AAA)

Dimensions (W x H x D) 40 x 155.5 x 113 mm

Weight (incl. batteries) 173 g

EU directives and disposal

This device complies with all necessary standards

for the free movement of goods within the EU.

This product is an electric device and must be

collected separately for disposal according to

the European Directive on waste electrical and

electronic equipment.

Further safety and supplementary notices at:

www.laserliner.com/info

ThermoSpot

Rev. 0615

SERVICE

Umarex GmbH & Co KG

– Laserliner –

Möhnestraße 149, 59755 Arnsberg, Germany

Tel.: +49 2932 638-300, Fax: +49 2932 638-333

[email protected]

Umarex GmbH & Co KG

Donnerfeld 2

59757 Arnsberg, Germany

Tel.: +49 2932 638-300, Fax: -333

www.laserliner.com

Other manuals for ThermoSpot

Table of contents

Other LaserLiner Laser Level manuals

LaserLiner

LaserLiner SuperSquare-Laser 2G User manual

LaserLiner

LaserLiner PowerCross-Laser 8 S User manual

LaserLiner

LaserLiner DigiLevel Pro 40 User manual

LaserLiner

LaserLiner Duraplane 360 User manual

LaserLiner

LaserLiner AquaPro User manual

LaserLiner

LaserLiner DigiLevel Plus 40 User manual

LaserLiner

LaserLiner SuperPlane-Laser 3D User manual

LaserLiner

LaserLiner MultiBeam-Laser MBL 3 User manual

LaserLiner

LaserLiner PowerCross-Laser 5G User manual

LaserLiner

LaserLiner EasyCross-Laser Green User manual

LaserLiner

LaserLiner AutoCross-Laser ACL 2C RX User manual

LaserLiner

LaserLiner SensoLite 100 User manual

LaserLiner

LaserLiner SuperCross-Laser Compact User manual

LaserLiner

LaserLiner AL 22 Classic User manual

LaserLiner

LaserLiner MasterLevel Box Pro User manual

LaserLiner

LaserLiner 080.50 User manual

LaserLiner

LaserLiner PrecisionCross-Laser PCL 8 User manual

LaserLiner

LaserLiner SuperCross-Laser SCL 3 User manual

LaserLiner

LaserLiner SuperCross-Green 3 User manual

LaserLiner

LaserLiner PCL 6P RX User manual

LaserLiner

LaserLiner X3-Laser User manual

LaserLiner

LaserLiner AutoLine-Laser 3D User manual

LaserLiner

LaserLiner SuperCross-Laser SCL 3 User manual

LaserLiner

LaserLiner SuperCross-Laser 2GP User manual

Popular Laser Level manuals by other brands

Nedo

Nedo ET-5 operating instructions

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP user manual

Spectra

Spectra LL300N manual

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP user manual

Nedo

Nedo Crossliner 4 operating instructions

Lasertec

Lasertec FX360G instruction manual

Flex

Flex ALC 8 Original operating instructions

Black & Decker

Black & Decker LZR5 user manual

Johnson

Johnson 40-6692 instruction manual

Cocraft

Cocraft HL 20-SG Original instructions

Zircon

Zircon iLine instructions

HWH

HWH 310 SERIES Operator's manual

Leica

Leica iCON robot 60 user manual

DeWalt

DeWalt DW082 Original instructions

imex

imex EL20 manual

Fixturlaser

Fixturlaser NXA D I-0912 user manual

Wacker Neuson

Wacker Neuson PAL450 Operator's manual

Metrica

Metrica 33806 Operation manual