Kyocera ECOSYS M3040idn User manual

Data Security Kit(E)

OPERATION GUIDE

COPY SCAN FAX

Introduction

This Setup Guide explains the procedures for installing and operating the optional Data Security Kit (E)

(hereinafter called Security Kit) and the procedure for system initialization.

Instructions for General Users (for Both General Users and Administrators)

• Security Kit Functions ......................................................2

• Touch Panel Display after the Security Kit is Installed .....3

Instructions for Administrators (for Those in Charge of Installation and Operation of the

Security Kit)

• Installing the Security Kit..................................................4

• Changing Security Password...........................................5

• System Initialization .........................................................6

• Warning Message ............................................................7

Security Kit Functions

The security kit enables overwriting and encryption.

Overwriting

Multi-functional products (MFPs) temporarily stores print jobs as data in the SSD, and prints from that data.

Users can also store various types of data in the SSD. As the data storage area used for such data remains in

the SSD as is until it is overwritten by other data, the data stored here remains restorable using special tools for

undesirable use.

The security kit deletes and overwrites (hereinafter collectively referred to as overwrite(s)) the unnecessary data

storage area used for the output data or deleted data to ensure that data cannot be restored.

Overwriting is performed automatically, without user intervention.

CAUTION: When you cancel a job, the machine immediately starts overwriting the data that has been already

stored in the SSD.

Encryption

MFPs store Custom Box and Job Box data in the SSD. It means the data could be possibly leaked or tampered

with if the SSD is stolen.

The security kit encrypts data before storing it in the SSD. It guarantees higher security because no data cannot

be decoded by ordinary output or operations.

Encryption is automatically performed and no special procedure is required.

CAUTION: Encryption helps enhance security. However, data stored in a Custom Box or Job Box can be

decoded by the normal printing operation. Never store confidential data in a Custom Box or Job Box.

Functions of Security Kit

Instructions for General Users (for Both General Users and Administrators)

Security Kit

SSD

Print Jobs

1. Overwrite unneeded area of data.

2. Encryption ( ) / Decoding ( )

Touch Panel Display after the Security Kit is Installed

When the security kit has been installed and is running

properly, Overwriting... appears in the touch panel while

unneeded data is being overwritten.

CAUTION: Do not turn the power switch off during overwriting. It may crash the SSD.

NOTE: If you turn the machine off at the power switch during overwriting, data may not be overwritten

completely from the SSD. Turn the machine back on at the power switch. Overwriting automatically resumes.

Overwriting...

Copy Copies

Paper

Selection

Zoom Density

Duplex Combine Quiet

Mode

1-sided>>1-sided

A4 100% Normal 0

OffOff

Functions

10:10

Favorites

Installing the Security Kit

The Security Kit Contents

The security kit package includes:

• License Certificate

• Installation Guide (for service personnel)

Before Installation

• The system will be initialized during installation of the security kit. This means that the data stored in the

SSD will be all overwritten. Special attention should be given if you install the security kit on the MFP

currently used.

Installation

Installation of the security kit should be performed by the service personnel.

The only thing required by the administrator during the installation is to enter the encryption code.

Encryption Code

An encryption code of 8 alphanumeric characters (0 to 9, A to Z, a to z) to encrypt data needs to be entered. By

default, the code is set 00000000.

As an encryption key is then created from this code, it is safe enough to continue using the default code.

CAUTION: Be sure to remember the encryption code you entered. If you need to enter the encryption code

again for some reason and you do not enter the same encryption code, all the data stored on the SSD will be

overwritten as a security precaution.

After Installation

After installing the security kit, you can change the security password.

The changes could be given as required, either at installation or later.

Refer to page 5 for the procedures.

Instructions for Administrators (for Those in Charge of Installation and

Operations of the Security Kit)

Changing Security Password

You can customize the security password so that only the administrator can use the security kit.

1Press the [System Menu/Counter] key.

2Press [ ] and [System/Network].

3If user login is disabled, the user authentication

screen appears. Enter your login user name and

password and then press [Login]. For this, you

need to log in with administrator privileges. Refer to

the machine's Operation Guide for the default login

user name and password.

4Press [ ], [Data Security] and [SSD Initialization].

5Enter the security password, and press [OK]. The

initial setting for the Security Password is "000000".

6Press [Security Password].

7Enter a new security password 6 alphanumeric

characters and symbols, and press [Next].

CAUTION: Avoid any easy-to-guess numbers for the

security password (e.g. 111111 or 123456).

8Enter the same password again.

9Press [OK].

Security Password

10:10System Menu/Counter.

System Initialization

< Back

1/1

System/Network - SSD Initialization

System Initialization

Overwrite all the data stored in the SSD when disposing of the machine.

CAUTION: If you accidentally turn the power switch off during initialization, the SSD might possibly crash or

initialization might fail

NOTE: If you accidentally turn the power switch off during initialization, turn the power switch on again.

Initialization automatically restarts.

1Press the [System Menu/Counter] key.

2Press [ ] and [System/Network].

3If user login is disabled, the user authentication

screen appears. Enter your login user name and

password and then press [Login]. For this, you

need to log in with administrator privileges. Refer to

the machine's Operation Guide for the default login

user name and password.

4Press [ ], [Data Security] and [SSD Initialization].

5Enter the security password, and press [OK]. The

initial setting for the Security Password is "000000".

6Press [System Initialization].

7Press [Start] on the screen to confirm the

initialization. Initialization starts.

8When the screen appears to show initialization is

completed, check that the memory indicator is OFF,

and turn the power switch off and then on.

Security Password

10:10System Menu/Counter.

System Initialization

< Back

1/1

System/Network - SSD Initialization

Warning Message

If the encryption code information of the machine has been lost for some reason, the screen shown here appears

when the power is turned on.

Follow the steps below.

1Enter the encryption code that was entered during

the installation of the security kit.

CAUTION: Even though entering a different

encryption code can also enable continuation of a job,

this will overwrite all the data stored in the SSD.

Exercise extreme caution when entering an encryption

code.

The encryption code is not the same as the security

password.

2Press [OK].

3Confirm that the memory indicator is off. After that,

turn the power switch off and on.

Disposal

If the machine is unused and demolished, obtain directions for disposal from the dealer (from which you

purchased the machine) or your service representative.

10:10

Keyboard

Encryption Code

00000000

2014.2

Other manuals for ECOSYS M3040idn

This manual suits for next models

Table of contents

Other Kyocera All In One Printer manuals

Kyocera

Kyocera TASKalfa 205c User manual

Kyocera

Kyocera TASKalfa 181 User manual

Kyocera

Kyocera TASKalfa 255 User manual

Kyocera

Kyocera ECOSYS M3860idnf User manual

Kyocera

Kyocera FS-6025MFP/B User manual

Kyocera

Kyocera TASKalfa 620 User manual

Kyocera

Kyocera FS-1116MFP User manual

Kyocera

Kyocera TASKalfa 180 User manual

Kyocera

Kyocera FS-C2026MFP User manual

Kyocera

Kyocera Ecosys M2235dn User manual

Kyocera

Kyocera TASKalfa 306ci User manual

Kyocera

Kyocera TASKalfa 3050ci User manual

Kyocera

Kyocera ECOSYS M3040idn User manual

Kyocera

Kyocera CS-5035 Copystar User manual

Kyocera

Kyocera FS-2100DN Installation and operating manual

Kyocera

Kyocera TASKalfa 552ci User manual

Kyocera

Kyocera KM-C850 User manual

Kyocera

Kyocera KM-C2525E User manual

Kyocera

Kyocera ECOSYS FS-C2126MFP User manual

Kyocera

Kyocera KM-4035 User manual

Kyocera

Kyocera ECOSYS M2030dn User manual

Kyocera

Kyocera ECOSYS M6530cdn User manual

Kyocera

Kyocera TASKalfa 350ci User manual

Kyocera

Kyocera ecosys M2640idw User manual

Popular All In One Printer manuals by other brands

Triumph Adler

Triumph Adler DC 2016 Instruction handbook

Epson

Epson WorkForce WF-2510 Basic guide

Epson

Epson Stylus Scan 2000 Product information guide

Epson

Epson PictureMate Snap PM 240 Start here

Konica Minolta

Konica Minolta bizhub C35 user guide

Brother

Brother MFC-J430w user guide

Konica Minolta

Konica Minolta BIZHUB 558 Quick reference guide

Lexmark

Lexmark MX710 Series setup sheet

Brother

Brother MFC-9760 owner's manual

Lexmark

Lexmark XC8155 user guide

Lexmark

Lexmark X642E Service manual

Sharp

Sharp MX-2310U Start guide

Aficio

Aficio 200 manual

Canon

Canon ImageCLASS 2300 setup sheet

Ricoh

Ricoh Pro C900 Brochure & specs

Lexmark

Lexmark X925 Installation

Brother

Brother Business Smart MFC-J4510dw manual

Epson

Epson Stylus CX8400 Series Brochure & specs