Kwikset Powerbolt 2 Installation manual

START

First, we need to confirm your lock is “ready” to

be programmed.

To be sure, let’s reset your lock.

1. Make sure the lock is in the unlocked position.

2. Remove the battery cover.

3. Press and hold the “Reset” button for 5 seconds. You will hear 3 long beeps after

the 5 seconds is completed indicating the lock has been reset.

A User Code is used to unlock the door while a Mastercode is a password for making changes to

the lock features.

Step 1:

Reset your lock to original settings

Interior of door

You will reset your User Code to 1-2-3-4

and Mastercode to 0-0-0-0 when the reset is

complete.

TIP

Powerbolt 2| Touchpad Keyless Entry

Programming Instructions

Programming Instructions Powerbolt 2 Touchpad Keyless Entry

Step 2:

Set locking and unlocking direction

1. Make sure the door is open and in the unlocked position.

2. Press 0 –0 –0 –0 – – 00 –

Note: Each button represents two numbers (i.e. ONLY push the button once for 0). If

you incorrectly enter the code, wait 10 seconds until you hear three beeps. Then you

can try again.

You may or may not see your keypad light up

orange during this step. Either way, complete the

step.

TIP

3. If the step was completed correctly, the latch bolt will extend out and retract back in

completely.

The lock will also beep twice and the keypad will

flash Green when the step is successful.

TIP

Step 2:

Set locking and unlocking direction

Programming Instructions Powerbolt 2 Touchpad Keyless Entry

1. Make sure the door is open and in the unlocked position.

2. Press 0

3. The latch will extend fully to the lock position and end with one beep and the keypad

will turn off.

4. Enter 1 –2 –3 –4 –

5. The latch will retract fully in the unlock position and end with one beep and the

keypad will turn off.

1. Make sure the door is open and in the unlocked position.

2. Enter the default Master Code 0 –0 –0 –0 – – 5 –

3. The lock will beep twice and the keypad will flash Green.

Step 3:

Test the Lock

Step 4:

Delete all User Codes

Programming Instructions Powerbolt 2 Touchpad Keyless Entry

1. Make sure the door is open and in the unlocked position.

2. Enter the default Master Code 0 –0 –0 –0 – – 7 –

3. Enter a 4 to 10 digit code and press

4. The lock will beep twice and the keypad will flash Green

If you need further assistance, please call us back at 1-800-327-LOCK (5625).

1. Make sure the door is open and in the unlocked position.

2. Enter the default Master Code 0 –0 –0 –0 – – 1 –

3. Enter a 4 to 10 digit code and press

4. The lock will beep twice and the keypad will flash Green.

Step 6:

Change the Default Mastercode

Step 5:

Program User Codes

Other manuals for Powerbolt 2

Table of contents

Other Kwikset Door Lock manuals

Kwikset

Kwikset Signature Series User manual

Kwikset

Kwikset Smartcode 914 Operating instructions

Kwikset

Kwikset 28756 User manual

Kwikset

Kwikset Camino Pull User manual

Kwikset

Kwikset SmartCode 909 User manual

Kwikset

Kwikset 907 15 SMT User manual

Kwikset

Kwikset SmartCode 9270CNT-514S User manual

Kwikset

Kwikset 62873/01 User manual

Kwikset

Kwikset SMARTCODE User manual

Kwikset

Kwikset 69925-001 User manual

Kwikset

Kwikset Smartcode 888 User manual

Kwikset

Kwikset Kevo User manual

Kwikset

Kwikset 62889 / 01 User manual

Kwikset

Kwikset 69926-001 User manual

Kwikset

Kwikset Premis Installation guide

Kwikset

Kwikset SMARTCODE 917 User manual

Kwikset

Kwikset 914CZigBee C4 User manual

Kwikset

Kwikset 699 FN User manual

Kwikset

Kwikset OBSIDIAN User manual

Kwikset

Kwikset Smartcode 910 User manual

Kwikset

Kwikset Premis User manual

Kwikset

Kwikset Signatures Lisbon 157LSL SQT 26 User manual

Kwikset

Kwikset 62822 / 01 User manual

Kwikset

Kwikset 720PSK RDT 15 CP User manual

Popular Door Lock manuals by other brands

Assa Abloy

Assa Abloy effeff 827A-IP Mounting instructions

We.lock

We.lock SECBNEBL51 instructions

Iseo

Iseo MA1A installation guide

ID Lock

ID Lock 150 user manual

Lockly

Lockly ACCESS TOUCH PRO user manual

iLoq

iLoq G50S user guide

SDC

SDC Z7835 installation instructions

ilco

ilco 452 Installation

Samsung

Samsung shs-h705 user guide

TRU-BOLT

TRU-BOLT 08102017 user manual

CDVI

CDVI 500-LADJ quick start guide

Igloohome

Igloohome Deadbolt 2S Metal Grey Installer/user guide

eSSL

eSSL FL-300 user manual

JAKO

JAKO JKBTNX4 installation guide

Dorma

Dorma MUNDUS PREMIUM GK 50 Mounting instruction

SCOOP

SCOOP Pullbloc 4.1 FS Panik Assembly instruction

Yale

Yale MORTISE 8800 SERIES installation instructions

Siegenia

Siegenia KFV AS3500 Assembly instructions