Kohler MARGAUX Assembly instructions

BEFORE YOU BEGIN

กอนเริ่มการติดตั้ง

OPERATION INSTRUCTIONS

ขอแนะนําการใชงาน













Put your hand in the sensing -range, the

faucet should turn on. The faucet should

turn off after removal within 0.5-2 seconds.

The sensing will be adjusted automatically

as per the condition of the lavatory and

surrounding environment.

All information is based on the latest product information

available at the time of publication, Kohler Co. reserves

the right to make changes in product characteristics,

packaging, or availability at any time without notice.

Please leave these instructions for the consumer. They

contain important information.

NOTE:

1. Flush the water supply pipes thoroughly to remove

debris. Faucet is designed for tap water or potable

water.

2. Do not attack the faucet with rough strength to

avoid being damaged.

3. Do not damage the surface of sensing window when

installing or cleaning the faucet.

4. For new installations, install the faucet and drain to

the lavatory before installing the lavatory.

5. As for DC type faucets, please pay special attention

to insert direction match of battery poles. Tighten

the battery cover completely to prevent its

exposure to moisture.

6. As for AC type faucets, strictly follow indicated

instructions to perform electric connection. Only

provide electric supply to power box after the

installation is completed.

7. One AC/DC transformer for max.two faucets.

8. Electrical source must equiped with suitable fuse to

protect AC/DC transformer unit from damage.

9. Do not put the faucet near strong ultraviolet or

electromagnetic ﬁeld.

10. Cover the sensing window with black tape when

repairing lavatories.

11. Turn off the electrical source and shut down water

supply before the faucet repaired.



 

  



ขอสังเกต:

  





  

  

  

  



  

   

  

  

   

   

  

  

   

   

   

  

 

 

MARGAUX TOUCHLESS LAVATORY FAUCET

กอกอางลางหนาระบบเซ็นเซอร รุนมารกอ ทัชเลส

K-15539X

INSTALLATION AND CARE GUIDE

ขอแนะนําการติดตั้งและการดูแลรักษา

RECOMMENDED PRODUCT

K-2661T Forefront Square Vessel

K-4819 Reve™ Vessel Lavatory

K-19047T Escale® Vessel Lavatory

K-2200T-G Conical Bell™ Above Counter

ผลิตภัณฑที่แนะนํา









174

G 1/2

ระยะการติดตั้ง ROUGH-IN DIMENSION

Output: DC 3 V

 Input: AC 220 V



Ø54

Ø66.5

Ø31.75

Ø41.2

226

MAX 726



MAX 40



MAX 590



พารามิเตอร PARAMETERS

Power: AC 220V, 50/60 Hz

Sensor Duration: Less than 0.75 s

Shut-off Delay: 0.5~2 s

Sensing Distance: Automatic adjustment

Flow Rate: No more than 0.125L/s at 0.1 MPa.

Overtime Flowing Control: Automatically stop ﬂushing

when the faucet senses an object for more than

1 minute continuously

Ambient Temperature: 1~55°C

Supply Water Temperature: 0.5~71°C

Supply Water Pressure: 0.05~0.86 MPa























INSTALLATION

ขอแนะนําการติดตั้ง

วิธีติดตั้งกอกนํ้า

1. ประกอบกอกนํ้าเขากับอางลางหนา





















How to Install the Faucet

1. Fixing the faucet and lavatory

Install the mounting stud (2) to the

bottom of the faucet (3), then slip the

washer (4) over the mounting stud and

put them into the groove on the spout.

Insert the power wire (9) and supply

hose (1) into the hole (5) from under-

side of the lavatory. From underside of

the lavatory, slide the rubber washer

(6), meter washer (7) and ﬁxed nut (8)

onto the mounting stud (2). Tighten nut

(8) to make faucet installed on the

lavatory.

2. ประกอบกลองควบคุม



























2. Fix the control box

Remove the cover (11) after loose the

screws (12). Determine the installation

location of control box (10) per

rough-in, then drill holes and place

sheath in it. Make the control box cling

on the wall and outlet upturned, then

ﬁx the control box on the wall by

screws (13), keep the control box

parallel to the wall.

Connect check valve (14) and outlet

together, then connect the hose (15)

and check valve (14). Put a bucket in

the front of hose (15), turn on the check

valve (14) completely and open the

water supply. After the water ﬂushing

about 1 minute, make sure no leakage

and turn off the water supply.









ขอสังเกต:





 



 





















ขอสังเกต:



 

 

 

  

 

Connect hose (15) to the inlet of valve,

then connect the outlet of valve and

inlet (16) of spout assy.

NOTE:

1. Do not lost the washer of hose.

2. Please let user prepare check valve

and hose by themselves.

3. Do not confuse the inlet and outlet.

Round Hole



Finally, connect the red-green lines in

solenoid valve and cover of valve box,

then connect the black-orange lines in

power supply and control board (If you

faucet is AC version, please let the

black-green line in the control board

through the “U” gap and connect with

the line of AC power box). Connect the

red and white connectors in the sensor

line and cover, and tight the box (10)

and cover (11) by screws (12).

Connect AC/DC transformer



Hex Hole



NOTE:

1. When install the box and cover by

screws, make sure the sensor line

need to be through “U” Gap of cover.

2. Connect the batteries, faucet will b

in the period of automatic adjusting

sensing distance (about 10 minutes).

The faucet will not work during this

period.

Inlet



Outlet



วิธีติดตั้งสะดืออาง

















ขอสังเกต: 











วิธีติดตั้งหมอแปลงไฟ AC/DC

(สําหรับรุนที่ใชไฟ AC เทานั้น)

How to Install the Drain

Screw off the drain ﬂange (23) from

drain. Apply a ring of plumbers putty

around underside of the drain ﬂange

(23). Insert the drain body (24) into the

lavatory from the underside.

Apply Plumbers

Putty



Thread the drain ﬂange (23) onto the

drain body (24). Tighten the locknut

(25) by hand from the underside of the

ﬁxture. Remove any excess putty.

NOTE: Do not try to change the

position of the drain after the

locknut(25) is tightened, or you may

break the putty seal.

Connect the tailpiece (26) to the trap

(27).The tailpiece should extend

25 mm to 55 mm into the trap.

Wire connection pattern for one to one



Faucet



AC/DC Transformer

 Connect AC 220V





Switch

 Wire Tube



HOW TO INSTALL THE AC/DC TRANSFORMER

(ONLY USED WITH TOUCHLESS FAUCET, AC)

NOTE: Not allowed connect AC 220V electrical source to DC wire connector of AC/DC transformer

ขอสังเกต:



 

 

 

 

 



 

 

 

 

 

Wire connection pattern for one to two



Connect to Faucet



Connect to Electrical

Source



Connect to Electrical

Source



Connect to Faucet



Faucet



Faucet



Hose



Connector

 

Wire



Wire Tube



Switch



Wire Tube



AC/DC

Transformer





Connect AC 220V





1. Install AC power unit (sticker on the back) dry, and

avoid showering, soaking from water. Customer

prepare wire tube and wire according to requirement.

Wire tube should be put into the wall. Suggested wire:

AC connection wire should with insulated protecting

layer or sleeve and the section should be bigger than

0.5 mm2. The section of DC connection wire should be

bigger than 0.3mm2. The connection pattern must

according to illustrations above.

2. After wire layout ﬁnished, check and repair if needed.

Then connect AC connector of AC/DC transformer to

electrical source from the control box, and DC

connector of AC/DC transformer to faucet. Turn on

AC electrical power, faucet will be in the period of

automatic adjusting sensing distance (about

10 minutes). The faucet will not work during this

period.

INSTALLATION CHECKOUT

ทดสอบการติดตั้ง







Check and ensure that all connections are tight. Open the

drain. Turn on main water supply and check for leaks.

Replace as required.

การทําความสะอาดหลังการติดตั้ง CLEANING INSTRUCTIONS

Clean the Filtration System

The faucet includes connector assembly

with high quality filtration system. If there

is a lot of debris in the supply pipes or the

quality of water is bad, it will cause the

flow in bad condition. Please clean the

filtration system as following steps:

1) Turn clockwise the adjustment bolts (30)

on the connector assemblies with the hex

wrench (31), in order to close the connector

assemblies;

2) Screw off the connector caps (33)

counterclockwise with the special key (34);

3) Remove and clean the filters (32), then

reinstall them;

4) Tighten the connector caps (33)

clockwise with the special key (34). Turn

counterclockwise the adjustment bolts (30)

on connector assemblies with the hex

wrench (31).

If necessary,you can screw off and clean

theaerator ofthe faucet,then reinstall it to

improve the flow condition.

NOTE: the strainer must be fit back to the

spout after it is cleaned.

Turn the handle to the middle position of

the temp adjusting range (For mixed faucet).

Insert the aerator key (29) into the aerator

slot and take off the aerator (28) by rotating

it counter-clockwise. Put hands into the

sensing range under the outlet. Flush water

through the faucet debris. Remove any

debris from the aerator assembly (28). Shut

the main water supply and reinstall the

aerator assembly (28). Finally, open the

main water supply.

Clean the Aerator Assembly

ทําความสะอาดปากกอก

















ทําความสะอาดฟลเตอร











 

























ขอสังเกต:



สําหรับทุกพื้นผิว: 

 

    



 



All Finishes: Clean the ﬁnish with a mild soap and warm

water. Wipe entire surface completely dry with a clean soft

cloth. Many cleaners may contain chemicals, such as

ammonia, chlorine, toilet cleaner etc. which could adversely

affect the ﬁnish and are not recommended for cleaning.

Do not use abrasive cleaners or solvents on Kohler

faucets and ﬁttings.

1. Note of the Indicator Flashing

The indicator is the only and effective way to learn

the faucet's working conditions. So the users can

use the sensor faucet correctly with knowing the

meaning of the sensor indicator's ﬂashing.

(1) Fast ﬂashing means the faucet is in the period

of adjusting sensing distance after power on for

10 minutes. During these 10 minutes, please do

not put objects in the sensing range.

(2) The indicator ﬂashes every 2 seconds: As for

DC type faucets, the symptom indicates that the

unit is out of battery and ceases working.

Recommend to replace batteries. As for AC type

faucets, there're two possibilities. One possibility

is that the unit is out of battery while the other

is that bad wire connection occurs to DC terminal

of the power box provided AC supply functions

normally.

(3) In normal condition, the water will ﬂow and the

indicator will ﬂash one time when objects are

inducted. (The indicator does not ﬂash when

faucet stops ﬂowing.)

2. Overtime Flowing Control

When the faucet works for about 1 minute

continuously, the water will be shut off automatically.

After that, objects must be removed from

the sensing range. Then the water will ﬂow when

objects go into the sensing range again.

Otherwise, the faucet will not work.

3. Intelligent Stopping Flowing

Water will flow out when object are putted into

the sensing range. If the objects hold still for

15 seconds, the faucet will shut off automatically.

After that, objects must be removed from

the sensing range. Then the water will flow when

objects go into the sensing range again.

Otherwise, the faucet will not work.

1. ขอควรทราบเกี่ยวกับไฟแสดง



















 







2. ฟงกชั่นปองกันนํ้าลน













3. ฟงกชั่นปดนํ้าอัตโนมัติ

















Indicator



ระบบการทำงาน OPERATION SYSTEM

TROUBLESHOOTING

Some trouble symptoms can be identiﬁed by the indicator's ﬂashing. (Refer to "Note of the Indicator Flashing")

การแกปญหาเบื้องตน



No water ﬂow. 1. No battery or wrongly connected. 1. Check the batteries.

(Indicator not ﬂashing). 2. No power supply or wrong connection. 2. Check the power supply and the conncetion.

3. Object in sensing range. 3. Remove the object.

4. Dirt on the sensing window. 4. Clean the sensing window.

5. The connector does not connect well. 5. Check the connector.

The indicator ﬂashes 1. Batteries are out of power. 1. Replace batteries.

once every 2 seconds 2. Just power cut of AC/DC transformer. 2. Check the power supply.

and the water doesn't 3. DC or AC connector may not 3. Reconnect the connector.

ﬂow out. connect well.

No water ﬂow while 1. Just ﬁnishing installation. 1. Wait for 10 minutes.

the indicator ﬂashes 2. The connector assemblies are closed. 2. Open the connector assemblies.

3. Aerator is blocked. 3. Clean the aerator.

4. The ﬁlter is blocked. 4. Clean ﬁlter.

Low water ﬂow while 1. The connector assemblies are not 1. Turn counterclockwise the adjustment bolts

the indicator does not open completely. on connector assemblies with the hex

ﬂash. 2. The ﬁlter is blocked. wrench.

3. Aerator is dirty. 2. Clean ﬁlter.

4. The supply water pressure is lower. 3. Clean the aerator.

4. Check the water supply system.

Keep water out within Object in sensing range. Remove object

1 minute while indicator

does not ﬂash.

อาการ สาเหตุที่เปนไปได การแกปญหา

  

  

   

  

  

 

  

   

  

  

  

  

  

  

  

   

  

  

   

  



Symptoms Probable Causes Corrective Action

SERVICE PARTS

อุปกรณประกอบและอะไหล

1111073-SP

Tube Outlet



1035611-SP-CP

Drain



Hex Wrench



1093557-SP

Aerator



1112755-SP

Assy, Sensor



Filter Key



16306X-NA

AC/DC Transformer



1097741-SP

Diaphragm Assy



1045458-SP

Valve Cover



Mounting Hardware

 1039038-SP

Filter

 1115768-SP

Solenoid Assy



Solenoid Wire



Power Cord



1112757-SP

Valve Cover Assy



MARGAUX TOUCHLESS LAVATORY FAUCET

กอกอางลางหนาระบบเซ็นเซอร รุนมารกอ ทัชเลส

K-15539X

**Finish/color code must be speciﬁed when ordering.



Aerator Key



This manual suits for next models

Table of contents

Other Kohler Plumbing Product manuals

Kohler

Kohler K-4761 User manual

Kohler

Kohler 18492-CP Assembly instructions

Kohler

Kohler KUMIN K-18655T-B-CP User manual

Kohler

Kohler K-9245 Assembly instructions

Kohler

Kohler K-6665 User manual

Kohler

Kohler GP30420 Manual

Kohler

Kohler 11829T-B User manual

Kohler

Kohler FLIGHT NEUS E62C70-00 User manual

Kohler

Kohler K-9295 Assembly instructions

Kohler

Kohler Mira Response Handset L19A Operation manual

Kohler

Kohler 1031338 Manual

Kohler

Kohler K-7163 User manual

Kohler

Kohler ODEON 98963M-4 User manual

Kohler

Kohler K-18647 Assembly instructions

Kohler

Kohler K-11608 User manual

Kohler

Kohler K-7744 User manual

Kohler

Kohler OVE Operation manual

Kohler

Kohler K-11810 User manual

Kohler

Kohler K-2191 User manual

Kohler

Kohler K-11344 Quick start guide

Kohler

Kohler K-7514 User manual

Kohler

Kohler K-7127 User manual

Kohler

Kohler K-35025-DWG User manual

Kohler

Kohler ESCALE K-19611T User manual

Popular Plumbing Product manuals by other brands

Weka

Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Operator's manual

American Standard

American Standard DetectLink 6072121 manual

Uponor

Uponor Contec TS Mounting instructions

Pfister

Pfister Selia 49-SL Quick installation guide

Fortis

Fortis VITRINA 6068700 quick start guide

Fortis

Fortis MILANO 78211JS installation instructions

Maxxus

Maxxus MX-M206-01 instruction manual

Moen

Moen 5922 Series installation instructions

Viega

Viega Prevista Pure 8512 Instructions for use

Viega

Viega Prevista Dry 8522.33 Instructions for use

Sanela

Sanela Lema SLP 59RB Instructions for use

Elkay

Elkay EDF15AC Installation, care & use manual

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions

baliv

baliv WT-140 manual

BELLOSTA

BELLOSTA romina 0308/CC Installation instruction

Bristan

Bristan PS2 BAS C D2 Installation instructions & user guide

Crosswater

Crosswater Heir 18-31 installation instructions