Kogan KAMN32QF7LA User manual

Table of contents

Other Kogan Monitor manuals

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual

32" QHD IPS FRAMELESS

MONITOR

2560 x 1440, 75Hz

KAMN32QF7LA

Ensure to read all instructions and warnings in this user guide prior to first use. Retain this

user guide for future reference.

•Do not position the monitor on unstable surfaces. If the monitor falls, it may lead to

damage and injuries to people around its vicinity.

•Do not place the monitor near heat sources (for example, heaters, stoves, fireplaces).

•Do not use the monitor in areas lacking adequate ventilation.

•Do not open the back panel of the monitor as it contains a high-voltage current even

when unplugged.

•Do not place heavy objects on the monitor, its power cord, or any other connected

cable.

•The back of this monitor is designed with ventilation holes. Do not cover or block them

as this may cause overheating and damage.

•Do not insert or spray anything into the vents of this monitor.

•Unplug the monitor if it will not be used for an extended period.

•Ensure the monitor is unplugged before cleaning.

•Do not use cleaning alcohol, ammonia-based liquids, or other harsh cleaners when

cleaning the monitor.

The terms HDMI and HDMI High-Definition Multimedia Interface,

and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing Administrator, Inc. in the United States, and other

countries.

SAFETY & WARNINGS

A Monitor (x1)

B Stand stem (x1)

C Stand base (x1)

D Base cover (x1)

E12mm M4 screw (x2)

F23mm M4 screw (x4)

G VESA connector (x4)

H DisplayPort cable (x1)

I Power cable (x1)

J Power adapter (x1)

K User guide (x1)

COMPONENTS

Ports

Front view

1

Menu/enter button

2

Up button

3

Down button

4

Exit button

5

Power button

6

Power port

7

DisplayPort port

8

HDMI port

9

Audio output port

10

LED indicator

OVERVIEW

1

2

3

4

5

6

7

8

9

10

1. Ensure all components are present before disposing of any packaging.

Open the packaging and remove the stand stem (B) and stand base (C). Using a

Phillips screwdriver (not supplied), secure the stand base (C) to the stand stem (B)

with the 12mm M4 screws (E). The optional base cover (D) can be installed onto the

stand base (C) at this point.

2.Remove the monitor (A) and place it on a flat surface. Using a Phillips screwdriver,

attach the stand stem (B) to the monitor (A) with the 23mm M4 screws (F).

3.Use both hands to lift the monitor (A) upright.

STAND ASSEMBLY

E

C

A

F

B

B

1. Open the packaging, and with the foam attached, take out the monitor (A) and place

it on a flat surface. Remove the upper foam and film covering the monitor, then place

the monitor on the lower piece of foam.

2.Remove the VESA connectors (G) from the accessory bag. Using a flathead

screwdriver (not supplied), secure the VESA connectors (G) onto the back of the

monitor (A).

3.Mount the monitor (A) as desired with the steps provided with your VESA mount.

VESA MOUNT

G

A

Notes:

•The mounting hole distance for this monitor is 75 x 75mm.

•VESA mount and mounting accessories are not included.

Mount

(not supplied)

Power adapter

Connect one end of the power adapter into the power port on the monitor. Connect the

other end into one end of the power cable.

Connect the other end of the power cable into a power socket.

Earphones

Plug in earphones (not supplied) into the 3.5mm headphone jack on the monitor.

Note: If audio devices are plugged into the monitor and computer, there will be no sound.

CONNECTIVITY

HDMI

To allow the monitor to receive HDMI signals from the computer, plug one end of an HDMI

cable (not supplied) into the monitor. Plug the other end of the cable into the HDMI output

port on your computer.

DisplayPort

To allow the monitor to receive DisplayPort signals from your computer, plug in one end of

the provided DisplayPort cable into the DisplayPort port on the monitor. Plug the other end

of the cable into the DisplayPort output on the computer.

1. Connect the monitor to your computer via HDMI/DisplayPort.

2.Connect one end of the power adapter into the power port on the monitor. Connect

the other end into one end of the power cable. Connect the other end of the power

cable into a power socket. Switch the power socket on.

3. Press the power button on the monitor to turn it on. The LED indicator will

illuminate white.

Navigation window

Whilst turned on, press any button located underneath the monitor to bring up the

navigation window. These include options to go to the on-screen display menu, as well as

shortcuts to sub-menus and options.

•Press the menu/enter button to access the OSD menu.

•Press the up button to access the LED effect menu.

•Press the down button to access the GamePlus menu.

•Press the exit button to exit the OSD menu.

•Press the power button to access the power menu.

OPERATION

Note:

It is recommended to use a surge protector with adequate voltage if the power cable is

not directly connected to a wall socket.

Note:

If the LED indicator turns off while the monitor is on, there is no video, horizontal, or

vertical signal detected. Ensure the HDMI/DisplayPort cable has been properly

connected.

OSD menu

LED effect menu

GamePlus menu

Exit menu

Power menu