Kogan KAMN30FXULA User manual

Table of contents

Other Kogan Monitor manuals

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual

30" CURVED ULTRAWIDE

GAMING MONITOR

(2560 x 1080, 1500r, 200Hz, 21:9)

KAMN30FXULA

Safety & Warnings

3

Components

4

Overview

5

Assembly

6

VESA Mount

7

Connectivity

8

Operation

10

ECO Modes & Gameplus

14

Specifications

15

• Read all instructions before using the appliance and retain this user guide for future

reference.

• Unplug the monitor before cleaning it.

• Use a clean, slightly-dampened cloth to wipe the main monitor body.

• To c l e a n t h e s c r e e n : t u r n i t o f f , u n p l u g i t a n d w a i t f o r i t t o c o o l c o m p l e t e l y, t h e n w i p e i t

with a dry microfibre cloth.

• Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.

• This monitor is designed with ventilation holes on the back of the casing. Do not cover or

block them.

• Do not insert any object or spray any liquid into the vents.

• Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as

well as in rooms lacking adequate ventilation.

• Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged

and may injure nearby people.

• Unplug the monitor if it is not going to be used for an extended period.

• Do not place heavy objects on the monitor, its power cord or any connected cable.

• Do not open the back panel of the monitor, as it contains a high-voltage current even

when not plugged in.

The terms HDMI and HDMI High-Definition Multimedia

Interface, and the HDMI Logo are trademarks or registered

trademarks of HDMI Licensing Administrator, Inc. in the

United States and other countries.

SAFETY & WARNINGS

Monitor

Stand Stem

Stand Base

VESA Connectors

DP cable

Power Cable

Power Adapter

User Guide

COMPONENTS

Controls

1. Power button

2. RGB Range/Exit

3. LED light effect/Down

4. Menu/Enter

5. GamePlus Mode/Up

Ports

6. Power Input

7. HDMI Input

8. DisplayPort Input

9. Audio Output

OVERVIEW

Before disposing of any packaging, place all items on a soft, clean and flat surface to

ensure all components are accounted for.

Installing the Stand Base

1. Lay the monitor screen facing down on a table with the monitor still resting on the

packing foam. Attach the display base and attach it to the display neck. While the

neck is attached to the base, insert, and tighten the base screws to the underside

of the base.

2. Open the packing foam with the monitor resting facing downwards. Take the

assembled stand piece and insert it headfirst into the circular opening on the back

of the monitor. Once it is inserted press downwards on the neck until you hear a

‘click’ sound.

ASSEMBLY

WARNING: The panel of the monitor is fragile. Keep the foam

underneath the monitor screen while assembling the stand.

Follow the steps below to install onto a monitor arm or wall mount (not included)

1. Lay the monitor screen facing down on a table with the monitor still resting on the

packing foam.

2. With the circular indentation now open to you, remove the four screws installed on

the back of the monitor.

3. Install the provided VESA connectors to the back of the monitor.

4. With the VESA connectors installed, the monitor is ready to be wall mounted. The

mounting pattern is 75mm x 75mm.

VESA MOUNT

Power

1. Connect the included power cable to the monitor power port.

2. Connect the power cable to the power adapter.

3. Connect the power adapter to the power outlet.

Audio

Plug in your earphones to receive audio signals from your monitor. If your earphones are

connected to the monitor and audio devices are connected to your computer at the same

time, the audio devices will not produce sound. Earphones and other audio devices not

included.

CONNECTIVITY

HDMI

In order for the monitor to receive HDMI signals from the computer, use a HDMI cable to

connect the monitor to the computer.

DisplayPort

In order for the monitor to receive DisplayPort signals from the computer, use the

DisplayPort cable to connect the monitor to the computer.

1. Connect the monitor to the input device via HDMI or DisplayPort.

2. Connect the power cable to the monitor, then connect the other end directly to a

power socket.

3. Use the power button to turn the monitor on.

Indicator Light

Solid Blue light: Power is on and the monitor is operating normally.

Flashing Blue light: No video source. No horizontal or vertical signal detected. Please

ensure your computer is on and all video cables are fully inserted and/or connected.

The On-Screen Display (OSD)

The OSD menu may be used to adjust your monitor’s settings and

appears on screen after turning on the monitor and pressing the

Right button.

When using the monitor for the first time, settings will

automatically adjust to optimal parameters according to your

computer’s configuration and parts etc.

1. The monitor includes one touch options to access common settings.

2. Press

Right

to enter the OSD menu.

3. Press

Up

or

Down

to browse functions. Highlight the desired function, then press

Right

to enter the sub-menu. Press

Up

or

Down

to browse sub-menus, then press

Right

to highlight the desired function. Press

Up

or

Down

to highlight an option,

then press

Right

to confirm the settings and exit the current screen.

4. Press

Left

to exit the current screen.

OPERATION