Kodak I1220 - Document Scanner Operator's manual

Table of contents

Other Kodak Scanner manuals

Kodak

Kodak i5000 Series User manual

Kodak

Kodak PS50 Series User manual

Kodak

Kodak I1420 - Document Scanner User manual

Kodak

Kodak I1210 - Document Scanner User manual

Kodak

Kodak SLIDE N SCAN User manual

Kodak

Kodak i5000 Series User manual

Kodak

Kodak I1440 - Document Scanner User manual

Kodak

Kodak 6x6 Mobile Film Scanner User manual

Kodak

Kodak Ngenuity 9090DB User manual

Kodak

Kodak i800 Series Guide

Kodak

Kodak i1400 Series User manual

Kodak

Kodak i5000 Series User manual

Kodak

Kodak SCAN STATION 100 Operating manual

Kodak

Kodak Truper Series User manual

Kodak

Kodak i1220 Plus User manual

Kodak

Kodak 35 RAPID FILM SCANNER - USING THE SCANNER Guide

Kodak

Kodak A-61003 Product information sheet

Kodak

Kodak i1400 Series Guide

Kodak

Kodak I810 - Scanner Firmware - PC User manual

Kodak

Kodak I610 - Document Scanner Assembly instructions

Kodak

Kodak Scanmate i1120 User manual

Kodak

Kodak DirectView CR 500 System User manual

Kodak

Kodak i7300 User manual

Kodak

Kodak i1300 Series Mounting instructions

Popular Scanner manuals by other brands

Plustek

Plustek Scanner user guide

Z/I Imaging

Z/I Imaging PhotoScan 2001 instructions

Renkforce

Renkforce DS100-5M operating instructions

Image Access

Image Access WideTEK A2 Operation manual

Canon

Canon imageFORMULA CR-120N user manual

Fujitsu

Fujitsu FI-4860C2 Specifications

GeoSlam

GeoSlam ZEB Horizon Hardware guide

Revopoint

Revopoint POP user manual

Fujitsu

Fujitsu fi-4860C installation guide

Eddyfi Technologies

Eddyfi Technologies Floormap X user manual

Faselase

Faselase F6 user manual

Fujitsu

Fujitsu CardMinder user guide

Uniden

Uniden BC340CRS owner's manual

Infinite Peripherals

Infinite Peripherals INFINEA TAB M user manual

Mustek

Mustek PageExpress 4800 Pro user guide

Optex

Optex 750830 owner's manual

Innova

Innova 5210 user manual

Visioneer

Visioneer CardReader 100 Software guide

Kodak i1220 Scanner Installation and Configuration Guide Version: 4/3/2012

Page | 1

SCEIS Imaging: Kodak i1220 Scanner

Installation and Configuration Guide

If your scanner is already installed, go to the CONFIGURATION section on page 3.

Configuration will set the scanner to ignore blank pages.

INSTALLATION

TWAIN Driver Installation

1. Install the Kodak twain driver from the installation disk or download the most current driver version from:

http://graphics.kodak.com/docimaging/US/en/Products/Document_Scanners/Desktop/i1220_Scanner/Support/

Drivers_And_Downloads/i1200_Plus_Series_Scanner_Drivers/index.htm

The serial number of the scanner is required for the driver download. The serial number is located on the bottom of

the scanner.

Enable Citrix Access to the Scanner

2. Log in to Citrix (sceisgateway.sc.gov) and log in to either SAP or OnBase, it does not matter which one.

3. Right-click on the Citrix Connection icon in the system tray, located near the time in the lower right corner of the

screen. Left-click on ‘Open Connection Center’.

Click ‘Scanner Security’

Kodak i1220 Scanner Installation and Configuration Guide Version: 4/3/2012

Page | 2

Click ‘Yes’ and ‘Never Ask Me Again’ then ‘OK’

Click ‘OK’ to close the Citrix Connection Center

Kodak i1220 Scanner Installation and Configuration Guide Version: 4/3/2012

Page | 3

CONFIGURATION

On your Windows main screen…

Go to Start >> Programs >> Kodak >> Document Imaging >> Scan Validation Tool

Select ‘TWAIN’

Click ‘OK’

Wait while the connection to the scanner is made.

Kodak i1220 Scanner Installation and Configuration Guide Version: 4/3/2012

Page | 4

Select the ‘Setup’icon

Select ‘Default’ or ‘SCEIS Default’ if it is listed

Select ‘Two Sided’

Click ‘Settings’

Kodak i1220 Scanner Installation and Configuration Guide Version: 4/3/2012

Page | 5

Select each tab and make the settings identical to the screenshots

GENERAL TAB

Kodak i1220 Scanner Installation and Configuration Guide Version: 4/3/2012

Page | 6

In the ‘Side’ field on the General tab the word ‘Both’ should be grayed out.

If it says ‘Front’ or ‘Back’ instead of ‘Both’ click the ‘Advanced Image Setup’ icon

Select ‘Two Sided’

Uncheck ‘Different settings per side’

Click ‘Done’

Kodak i1220 Scanner Installation and Configuration Guide Version: 4/3/2012

Page | 7

SIZE TAB

Kodak i1220 Scanner Installation and Configuration Guide Version: 4/3/2012

Page | 8

ADJUSTMENTS TAB

Kodak i1220 Scanner Installation and Configuration Guide Version: 4/3/2012

Page | 9

ENHANCEMENTS TAB

Important

Kodak i1220 Scanner Installation and Configuration Guide Version: 4/3/2012

Page | 10

When you are done with all of the Image tabs (General / Size / Adjustments / Enhancements)…

Click the ‘Device’ button at the bottom of the screen.

DEVICE SCREENS

Select each tab and make the settings identical to the screenshots

GENERAL TAB