Jung BT 17182 Series User manual
Table of Contents
1 Safety instructions.............................................................................................................3
2 Device components...........................................................................................................4
3 Intended use .....................................................................................................................4
4 Product characteristics......................................................................................................5
5 Functional description .......................................................................................................6
6 Operation ..........................................................................................................................6
6.1 Operation on the cover .......................................................................................... 6
6.2 Wireless operation ................................................................................................. 7
6.3 Operation via extensions ....................................................................................... 7
7 Mounting and electrical connection...................................................................................7
8 Commissioning via app ...................................................................................................10
9 Resetting the device to the factory setting ......................................................................12
10 Technical data.................................................................................................................13
11 List of functions and parameters .....................................................................................14
12 Troubleshooting ..............................................................................................................25
13 Accessories.....................................................................................................................27
14 Conformity.......................................................................................................................27
15 Warranty..........................................................................................................................27
2 / 27
32405403 23.02.2023
J0082405403
JUNG HOME motion detector 2.2 m
1 Safety instructions
To avoid possible damage, read and follow the following instructions:
Installation only by persons with appropriate knowledge and experience in the
following areas:
– 5 safety regulations and standards for the installation of electrical systems
– Selection of suitable tools, measuring devices, installation materials and, if ne-
cessary, personal protective equipment
– Installation of the installation material
– Connection of devices to the building installation under consideration of local
connection conditions
Improper installation endangers your own life and the lives of users of the electrical
system and there is a risk of serious damage to property, e.g. through fire. You are at
risk of personal liability for personal injury and damage to property.
Contact an electrical fitter!
Danger of electric shock. If the device exhibits any visible damage, it must not be
used any longer. Immediately disconnect device from mains by switching off all asso-
ciated circuit breakers.
Danger of electric shock. Device is not suitable for disconnection from supply voltage
because – depending on the insert used – mains potential even is applied on the load
when the device is switched off. Always disconnect before carrying out work on the
device or load. To do so, switch off all associated circuit breakers.
Do not press on the sensor window. Device can be damaged.
The device must not be used for applications from the area of safety engineering,
such as emergency stop, emergency call, smoke extraction.
The device is not suitable for use as a burglar alarm or other alarm.
Read the instructions in full, observe them and keep them for future reference.
You can find more information on JUNG HOME at www.jung.de/JUNGHOME
JUNG HOME motion detector 2.2 m
3 / 27
32405403 23.02.2023
J0082405403
2 Device components
Image1: Device components
(1) System insert
(2) Design frame
(3) Sensor cover
(4) Sensor window
(5) Button OFF
(6) Status LED
(7) Button ON
LED indication during operation
Red Disabling function active, e.g. continuously ON/
OFF, motion detected with "walking test" activated
Blue, triple flashing Time has not been set, e.g. due to extended
power failure
Flashing green/red Device update is being performed
Red, triple flashing Error message (cover was previously connected
to a different system insert)
Sequentially flashing red/green/
amber
Self-test is being executed
3 Intended use
– Automatic switching of lighting depending on the heat motion and ambient
brightness
– Wireless connection to devices from the JUNG HOME system
– Operation with system insert for switching or dimming, or 3-wire extension
– Wall installation on system insert
JUNG HOME motion detector 2.2 m
4 / 27
32405403 23.02.2023
J0082405403
4 Product characteristics
– Commissioning and operation using JUNG HOME app on mobile end device
(smartphone or tablet) via Bluetooth
– Two buttons for continuously ON/OFF or automatic mode
– Extension of the detection field by the combination of several JUNG HOME
motion detectors or via the extension input
– Multi-colour status display
– Disabling local operation
– Free linking of the motion sensor with the load output in the system insert or
wirelessly with further JUNG HOME devices or to call up a scene
– Up to 16 time programs control the functions of the respective system insert
(switch on, switch off or dimming)
– Staircase lighting function (automatic switch-off) with switch-off warning
– Run-on time, switch-on delay, switch-off delay
– Activating/deactivating automatic functions with the JUNG HOME app
– Automatic date and time update when connecting with smartphone
– Maximum brightness and minimum brightness adjustable, with dimming insert
– Switching on with last brightness or fixed switch-on brightness, with dimming
inserts
– Integration of the load in areas (groups), in groups, main functions and scenes
– Evaluation of the extension inputs (if present) to control the system insert
– Bluetooth SIG Mesh for fully encrypted wireless communication and repeater
function
– Updating via JUNG HOME app
Available by update in the future:
– Time programs with sunrise and sunset (astro function)
– Time programs with random time
– Dynamic run-on time
– Disabling function and restraint: continuously ON/OFF or ON/OFF for fixed
time
– Night light function with period for brightness reduction, with dimming insert
– Hotel function (orientation light instead of OFF), with dimming insert
– Warm dimming (changing the colour temperature with simultaneous bright-
ness increase), with DALI insert
– Calling up a scene by motion
You can find information on updates and dates at www.jung.de/JUNGHOME
JUNG HOME motion detector 2.2 m
5 / 27
32405403 23.02.2023
J0082405403
Behaviour after a mains voltage failure
All settings and time programs are retained. Any missed switching times are not ap-
plied later. The load output or the system insert outputs are switched off, provided the
parameter "Switching status after mains voltage returns" is set to its default setting.
After mains voltage return, the device performs a self-test for a maximum of
20 seconds. After the self-test has been completed, the device is ready for operation.
If the device was not previously added to a Bluetooth Mesh network (project) by
means of the JUNG HOME app, it will switch to pairing mode for two minutes when
the mains voltage returns and the status LED will flash slowly at a regular interval in
blue.
The following applies during the self-test:
– Movements are not detected
– Operation via extensions and with the JUNG HOME app is possible
Power failure shorter than power reserve (min. 4 hours)
– Time and date are up to date
– The following time programs are performed normally again
Power failure longer than power reserve (min. 4 hours)
– The LED flashes blue three times repeatedly until the time is automatically up-
dated when connected with the app
– The time programs are not executed as long as the time is not up to date
5 Functional description
The device detects heat motions of people, animals and objects.
– The light is switched on if a person enters the detection field and the bright-
ness threshold is below the set brightness threshold.
– The run-on time restarts with each detected motion.
– The light is switched off if no more motion is detected in the detection field and
the run-on time has elapsed or the ambient light is bright enough and the run-
on time has elapsed.
To avoid any switch-on caused by a cooling lamp, no movement signals are evalu-
ated for a brief lockout time after switching off. The motion detector adjusts itself to
the ambient conditions to keep the time as short as possible.
6 Operation
6.1 Operation on the cover
The two buttons can be used to switch between automatic operation, continuously
ON and continuously OFF.
JUNG HOME motion detector 2.2 m
6 / 27
32405403 23.02.2023
J0082405403
￭ Press button ON (7) or OFF (5).
Continuously ON or continuously OFF is active: status LED (6) lights up in red.
In order to switch automatic operation back on, press button ON (7) or OFF (5)
again. Status LED (6) goes out.
6.2 Wireless operation
Wireless operation is done with linked JUNG HOME devices or via the JUNG HOME
App, which is also used to link the JUNG HOME devices (see 'Commissioning via
App').
6.3 Operation via extensions
Precondition:
A push-button, an Satellite insert 2-wire with an LB Management push-button 1-gang
or an Satellite insert 3-wire, power supply with an LB Management push-button 1-
gang or LB management motion detector is connected. Multiple extensions can be
combined with each other. Operation with the Rotary satellite insert 3-wire is de-
scribed in the rotary extension instructions.
If no run-on time (load) is set, the load either switches alternately ON/OFF or specific-
ally ON at the top and OFF at the bottom, depending on the extension used.
Switching on a load for the duration of the run-on time
￭ Press the operating cover at the top or the push-button briefly or LB manage-
ment motion detector detects a movement.
The run-on time is restarted by pressing again or detecting the movement again.
If the load is supposed to be able to be switched off manually, the parameter "Manual
switch-off of run-on time" must be activated.
Setting the brightness, only in combination with dimming insert
￭ Press and hold the operating cover at the top or bottom or the push-button. In
the case of a push-button, the dimming direction is changed with each new
long actuation.
7 Mounting and electrical connection
Communication between the JUNG HOME devices and linked mobile end devices is
performed wirelessly within the range of the Bluetooth Mesh network.
The range of wireless signals can be affected by:
– Number, thickness, position of ceilings, walls and other objects
– Material type of these objects
– High-frequency interfering signals
JUNG HOME motion detector 2.2 m
7 / 27
32405403 23.02.2023
J0082405403
Observe the following fitting instructions to maximise the range:
– Plan the number of JUNG HOME devices and their positions to keep the num-
ber of ceilings and walls between two devices as low as possible
– If JUNG HOME devices are installed on both sides of a solid wall, they should
be positioned as close as possible to each other on the opposite sides of the
wall. This keeps the attenuation of the wireless signal through the wall as low
as possible.
– When planning, make sure that there are as few building materials and objects
as possible that strongly attenuate the wireless signal (e.g. concrete, glass,
metal, insulated walls, water tanks, pipes, mirrors, book cabinets, storage
rooms and refrigerators) on the connection line between JUNG HOME devices
– Keep a distance of at least 1 m from devices that emit high-frequency signals
(e.g. microwave, motors) or use wireless signals at 2.4 GHz (e.g. WLAN
router, baby monitor, IP cameras, wireless loudspeakers etc.)
Detection field and range
The range specifications are affected by the installation height (see figure 2) and dir-
ection of movement. If the motion detector passes tangentially, this results in a signal
which can be evaluated well. If movement is radial to the motion detector, the signal
is harder to evaluate, resulting in a smaller range (see figure 3).
Figure2
Image3: Detection field
JUNG HOME motion detector 2.2 m
8 / 27
32405403 23.02.2023
J0082405403
For installation height 2.20 m (see figure 4), for installation height 1.10 m
(see figure 5)
Image4: Range at installation height of 2.2 m
Image5: Range at installation height of 1.1 m
Installation location
￭ Select a vibration-free installation location. Vibrations can lead to unwanted
switching.
￭ Avoid heat sources in the detection field. Heat sources can trigger the motion
detector, e.g. heating units, outlets of ventilation systems or air conditioners,
copiers, printers, coffee machines, draughty doorways, animals, etc.
To minimise the influence of interference sources, reduce the sensitivity or
limit the detection field by switching off a sensor (JUNG HOME app).
Mounting the cover
DANGER!
Electric shock when live parts are touched.
Electric shocks can be fatal.
Always disconnect before carrying out work on the device or load. For this, switch off
all corresponding circuit breakers, secure against being switched on again and check
that there is no voltage. Cover up adjacent live parts.
JUNG HOME motion detector 2.2 m
9 / 27
32405403 23.02.2023
J0082405403
Further installation steps are necessary to ensure the degree of protection IP
44 (see seal set instructions).
Prerequisite: The system insert (1) is mounted and connected properly (see instruc-
tions for the system insert).
￭ Fit the sensor cover (3) with design frame (2) on the system insert (1).
￭ Switch on mains voltage.
An system insert-cover alignment is executed.
If the status LED (6) flashes red three times at repeated intervals, the cover was pre-
viously connected to another system insert. To enable operation again, perform one
of the following steps:
￭ Fit the cover on the original system insert.
￭ If the system insert is of the same type: press the OFF button (5) (see figure 1)
for more than four seconds.
￭ With a system insert of a different type: reset the cover to default settings, any
parameter settings, app and network connections will be lost.
Checking detection field
￭ Activate the walking test via the app and pace off the detection field. The func-
tion is active for approx. five minutes.
If movements are detected, the status LED (6) lights up in red and this is indicated in
the JUNG HOME app. The linked lighting switches according to the current configur-
ation.
Expanding the detection field
The detection field can be expanded wirelessly. For this purpose, use the three-wire
extension with JUNG HOME presence or motion detectors and link it with the JUNG
HOME app to the main unit. Alternatively, connect the three-wire extension with LB
management presence or motion detectors to the main unit with the JUNG HOME
presence or motion detector via an extension line. In both cases, the main unit evalu-
ates the signals of the extension and switches on the lighting.
8 Commissioning via app
Prerequisite: The JUNG HOME device does not yet belong to a Bluetooth Mesh net-
work. Otherwise reset the device to the default setting.
If a Bluetooth Mesh network (project) does not yet exist, a new project must first be
created for the first JUNG HOME device in the JUNG HOME app.
If a Bluetooth Mesh network already exists, the project file for this network must be
opened in order to pair the new device.
After switching on the mains voltage, the device is automatically in pairing
mode for two minutes.
JUNG HOME motion detector 2.2 m
10 / 27
32405403 23.02.2023
J0082405403
Table of contents
Other Jung Security Sensor manuals
Jung
Jung Observer 70 User manual
Jung
Jung FM ES 36804 REG User manual
Jung
Jung 2103 REG ES User manual
Jung
Jung 3361MWW User manual
Jung
Jung 3360 User manual
Jung
Jung DWPM17360AL User manual
Jung
Jung KNX 3361MWW-01 User manual
Jung
Jung PMK 360 WW User manual
Jung
Jung Observer 220 User manual
Jung
Jung BT17361 Series User manual
Jung
Jung PMU 360 WW User manual
Jung
Jung 17180 Series User manual
Jung
Jung FPM360WW User manual
Jung
Jung Radio Detector 180 User manual
Jung
Jung FMDW360WW User manual
Jung
Jung Observer 110 User manual
Jung
Jung DWPMK360WW User manual
Jung
Jung BM 240 S1A WW User manual
Jung
Jung BM360MBWW User manual
Jung
Jung Standard 3361 WW User manual
