IOGear GW4K30GH60KIT User manual
Transmisor ultrarrápido inalámbrico de 60 GHz
4K UHD y kit de receptor para 2 televisores
www.iogear.com
Quick Start Guide
Guide de Démarrage Rapide
Guía de Inicio Rápido
Ultra-Fast 60GHz Wireless 4K UHD
Transmitter & Receiver Kit for 2 TVs
Kit émetteur et récepteur UHD 4K sans l
ultra-rapide 60 GHz pour 2 téléviseurs
GW4K30GH60KIT
PART NO. Q1636
3
Table of Contents
Table of Contents 3
Package Contents 4
System Requirements 4
Product Overview 5
Introduction 7
Hardware Installation 8
Operation - Pairing Procedure 10
FAQ 12
Limited Warranty 13
Contact 13
Compliance Information 14
Contenu de L'emballage 16
Conguration Système Requise 16
L’aperçu du Produit 17
Introduction 19
Installation du Matériel 20
Operación - Procédure d'appariement 22
Questions Fréquemment Posé 24
Garantie Limitée 25
Contact 25
Information de Conformité 26
Contenido del Paquete 28
Requerimientos del Sistema 28
Descripción del Product 29
Introducción 31
Instalación del Hardware 32
Procedimiento de Emparejamiento 34
Preguntas Frecuentes 36
Garantía Limitada 37
Contacto 37
Información de Conformidad 38
© 2020 IOGEAR. IOGEAR and the IOGEAR logo are registered trademarks of Aten Technology, Inc.
The terms HDMI, HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. All other trademarks are the properties of
their respective owners.
© 2020 IOGEAR. IOGEAR et le logo IOGEAR sont des marques déposées d'Aten Technology, Inc. Les
termes HDMI, HDMI High-Denition Multimedia Interface et le logo HDMI sont des marques commercia-
les ou des marques déposées de HDMI Licensing Administrator, Inc. Toutes les autres marques sont la
propriété de leurs propriétaires.
© 2020 IOGEAR. IOGEAR y el logotipo de IOGEAR son marcas comerciales registradas de Aten
Technology, Inc. Los términos HDMI, Interfaz multimedia de alta denición HDMI y el logotipo HDMI son
marcas comerciales o marcas comerciales registradas de HDMI Licensing Administrator, Inc. Todas las
demás marcas comerciales son propiedad de sus respectivos propietarios
4 5
Package Contents
• 1 x HDMI®Wireless Transmitter
• 2 x HDMI Wireless Receivers
• 3 x 5 VDC/3A Switching Power Supplies
• 3 x Mounting Kits
• 1 x Quick Start Guide
• 1x Warranty Card
• 1 HDMI source device (Bluray, Satellite box, PC etc.)
• 1 HDMI display device (HDTV, projector with HDMI port, etc.)
System Requirements
Product Overview
Transmitter
A. Power input
B. HDMI input
C. USB-Micro
D. OSD ON/OFF Switch
E. Set Button
F. Amber Link LED
G. Green Power LED
H. Amber Link LED
I. Set Button
A
B
CDEF G
HI
6 7
Product Overview
Receiver
J. Power input
K. HDMI output
L. USB-Micro
M. Amber Link LED
N. Green Power LED
O. Set Button
Introduction
These devices operate in line-of-site mode only. 60 GHz signals will NOT
go through walls or any obstructions and is intended for same room use
only. However the advantage over 2.4 and 5 GHz bands is that there is
zero latency and the video is uncompressed which makes this device ideal
for gamers where latency is number one concern. Video streaming is pure
4K @ 30Hz taking advantage of HDMI 1.4 with HDCP 2.2 compliant.
JKLMNO
6
4
5
8 9
Hardware Installation
Receiver
STEP 4. Connect the HDMI cable to your TV vacant HDMI port.
STEP 5. Connect the other side of your cable to the HDMI output port on
your GW4K30GH60KIT receiver.
STEP 6. Using the included power adapter, plug the power supply cable into
the power inlet port of your receiver and the receiver should now be
powered up.
STEP 7. Do the same to the second receiver as in step 6.
STEP 8. Wireless connection indicator of the transmitter and receiver will light
up when the transmitter and receiver is established wirelessly. If your
video source and your display is on, you should be able to see the
content of the source on your display.
Hardware Installation
Transmitter
STEP 1. Connect the HDMI cable to your video source (such as laptop,
projector or Bluray player) HDMI output port.
STEP 2. Connect the other side of your cable to the HDMI input port on
your GW4K30GH60KIT transmitter.
STEP 3. Use the included power adapters, plug the power supply cable
into the power inlet port of your transmitter and the transmitter
should now be powered up.
10 11
Operation - Pairing Procedure
1. The GW4K30GH60KIT with 1 transmitter and 2 receivers have already
been paired from the factory and no additional pairing is required. In case
pairing is required, please follow the steps below:
a. Make sure the video display is turned on.
b. Connect the HDMI cable between the display and the RX/receiver (or
receivers) rst, so that the receiver can read the EDID upon powering
up.
c. Connect the RX/receiver (or receivers) to the power supply. The
Green power LED will come on.
d. Turn on the video source.
e. Connect the HDMI cable between the video source and the
transmitter.
f. Connect the transmitter to its power supply. The green Power LED will
come on.
g. The amber Link LEDs from both the transmitter and receiver (or
receivers) will start to blink slow, then fast and then turn solid.
h. Connection is now established and you should be able to see video on
your display.
i. After 2 minutes, if there is no connection to the receiver(s), the
transmitter and receiver LINK LED will turn o. This is an indication
that the unit will be in sleep mode.
Operation - Pairing Procedure
2. To add the 2nd receiver to the GW4K30GH60KIT that has already connected:
a. Turn on the display and connect an HDMI cable between the display
and the 2nd receiver rst, this is so that the receiver can read the EDID
upon powering up.
b. Connect the power supply to the 2nd receiver.
c. Locate the side of the transmitter where the amber Link LED is o,
press the “Set” button momentarily till the LED starts to ash, then press
again for 3 seconds and let go. The LED will blink slow and then fast,
connection will be established within a few seconds.
d. It is possible that the amber Link LED could swap sides from one side
of the TX/transmitter to the other side. Press the “Set” button again for 3
seconds on the side that the amber Link LED is still blinking.
e. If you add the 2nd receiver within 2 minutes of connecting
GW4K30GH60KIT (refer to the step i. above), the LED at the connector
side maybe still blinking, press the “Set” button for 3 seconds and
connection should be established within a few seconds.
12 13
FAQ
Q: Transmitter and receiver will not connect wirelessly
A:
1. Please check if the wireless connection light is on and blinking
2. Restart the transmitter and receiver by starting the transmitter rst, then
receiver in that order. You can also press the transmitter “set” button
and then the receiver “set” button to establish connection
3. Reconnect HDMI cables make sure they can support 4K resolution or
use the cables that came with the kit
Q: The wireless indicator is on but nothing on the display
A:
Please check and see if the video source is working correctly by connect-
ing the HDMI cable from the video source directly to the display and see if
the operation is now normal
Q: Video is ickering or not stable
A:
1. Change the position of the transmitter and receiver and make sure that
they are within the specied operating distance
2. Restart the transmitter and receiver
3. Reconnect the HDMI cables
4. Check for any obstacles that may block the wireless signal from the
transmitter to the receiver
Contact
Limited Warranty
Warranty Information
This product carries a 1 Year Limited Warranty. For the terms and conditions of
this warranty, please go to https://www.iogear.com/support/warranty
Register online at https://www.iogear.com/register
Important Product Information
Product Model _____________
Serial Number _____________
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
1. Visit www.iogear.com for more product information
2. Visit www.iogear.com/support for live help and product support
IOGEAR
iogear.custhelp.com
support@iogear.com
www.iogear.com
14
Compliance Information
This equipment has been tested and found to comply with the limits for a Class B digital
service, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. Any changes
or modications made to this equipment may void the user’s authority to operate this
equipment. This equipment generates, uses, and can radiate radio frequency energy. If
not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected
- Consult the dealer or an experienced radio/TV technician for help
FCC Caution: Any changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
CE Statement: This device has been tested and found to comply with the following
European Union directives: Electromagnetic Capability (2004/108/EC), Low Voltage
(2006/95/EC) and R&TTED (1999/5/EC).
16 17
Contenu de L'emballage
• 1 x émetteur sans l HDMI
• 2 x récepteurs sans l HDMI alimentation à découpage
• 3 x 5 VDC / 3A Changer de source d'alimentation
• 3 x kits de montage
• 1 x guide de démarrage rapide
• 1 x carte de garantie
• Source avec sortie HDMI
• Écran avec entrée HDMI
Conguration Système Requise
L’aperçu du Produit
Émetteur
A. Puissance
B. Entrée HDMI
C. USB-Micro
D. Interrupteur marche / arrêt OSD
E. Bouton « SET »
A
B
CDEF G
HI
F. Voyant de liaison orange
G. Voyant d'alimentation vert
H. Voyant de liaison orange
I. Bouton « SET »
18 19
L’aperçu du Produit
JKLMNO
Récepteur
J. Puissance
K. Sortie HDMI
L. USB-Micro
M. Voyant de liaison orange
N. Voyant d'alimentation vert
O. Bouton « SET »
Introduction
Ces appareils fonctionnent uniquement en mode ligne de site. Les signaux
60 GHz ne traverseront PAS les murs ou les obstacles et sont destinés à
une utilisation dans la même pièce uniquement. Cependant, l'avantage par
rapport aux bandes de 2,4 et 5 GHz est qu'il n'y a aucune latence et que la
vidéo n'est pas compressée, ce qui rend cet appareil idéal pour les joueurs où
la latence est la principale préoccupation. Le streaming vidéo est pur 4K @
30Hz, tirant parti de HDMI 2.0 avec compatible HDCP 2.2.
This manual suits for next models
1
Table of contents
Languages:
Other IOGear Receiver manuals
IOGear
IOGear GWHD11 User manual
IOGear
IOGear Bluetooth Audio Transport GBMH221W6 User manual
IOGear
IOGear Share Pro USB-C GWHDKIT11C User manual
IOGear
IOGear GWMHDRX User manual
IOGear
IOGear GW3DHDKIT User manual
IOGear
IOGear Share Pro GWHD2DKIT User manual
IOGear
IOGear GUWAVKIT3 User manual
IOGear
IOGear GUW101A User manual
IOGear
IOGear GUWAVKIT4B User manual
IOGear
IOGear GWAVRC User manual
