Intermec EasyCoder PD41 Firmware update
Safety
Instructions
EasyCoder® PD41
Printer
Intermec Technologies Corporation
Corporate Headquarters
6001 36th Ave. W.
Everett, WA 98203
U.S.A.
www.intermec.com
e information contained herein is proprietary and is provided solely
for the purpose of allowing customers to operate and service Intermec-
manufactured equipment and is not to be released, reproduced, or used
for any other purpose without written permission of Intermec.
Information and specifications contained in this document are subject to
change without prior notice and do not represent a commitment on the
part of Intermec Technologies Corporation.
© 2005 by Intermec Technologies Corporation. All rights reserved.
e word Intermec, EasyCoder, and the Intermec logo are either
trademarks or registered trademarks of Intermec Technologies
Corporation.
roughout this manual, trademarked names may be used. Rather than
put a trademark (™ or ®) symbol in every occurrence of a trademarked
name, we state that we are using the names only in an editorial fashion,
and to the benefit of the trademark owner, with no intention of infringe-
ment.
ere are U.S. and foreign patents pending.
EasyCoder PD41 Printer Safety Instructions iii
International Notices and Approvals
FCC Notice (United States of America)
WARNING
is equipment generates, uses, and can radiate radio frequency energy
and if not installed and used in accordance with the instructions manual,
may cause interference to radio communications. It has been tested and
found to comply with the limits for a Class A computing device pursu-
ant to Subpart J of Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference when operated in a com-
mercial environment. Operation of this equipment in a residential area
is likely to cause interference in which case the user at his own expense
will be required to take whatever measures may be required to correct the
interference.
DOC Notice (Canada)
Canadian Dept. of Communication
REGULATIONS COMPLIANCE (DOC-A)
is digital apparatus does not exceed the class A limits for radio noise
emissions from a digital apparatus as set out in the radio interference
regulations of the Canadian Department of Communication.
Ministère des Communications du Canada
CONFORMITE DE REGLEMENTS (DOC-A)
Le présent appareil numérique n’émet pas de bruits radio-électriques
dépassant les limites applicables aux appareils numériques de classe A
prescrites dans le règlement sur brouillage radioélectrique édicté par le
Ministère des Communications du Canada.
EU Standard EN 55022 (The European Union)
WARNING
is is a Class A ITE product. In a domestic environment this product
may cause radio interference in which case the user may be required to
take adequate measures.
iv EasyCoder PD41 Printer Safety Instructions
International Notices and Approvals
DECLARATION OF CONFORMITY (CE)
We,
Intermec Printer AB
Box 123
S-431 22 Mölndal
Sweden
declare under our sole responsibility1
that the product
EasyCoder PD41
to which this declaration relates is in conformity
with the following standards
EMC:
EN 61000-6-3:2001
EN 61000-6-2:2001
Electrical Safety:
EN 60 950
following the provisions of Directives
89/336/EEC and 73/23/EEC
Mölndal 2005-12-07
...................................................................
Per-Ove Jacobsson
1/. Intermec assumes no responsibility as regards fulfilling the CE
Directive if the printer is handled, modified or installed in other
manners than those described in Intermec's manuals.
English
EasyCoder PD41 Printer Safety Instructions 1
Safety Warnings
Safety Warnings
• Read and review the warnings in this manual carefully before
connecting the printer.
• Moving parts are exposed when the side door is open, so ensure that
the door is closed before you operate the printer.
• Do not open the front/left-hand cover. Dangerous voltage!
• Do not remove the bottom plate. Dangerous voltage!
• Caution: Double pole/neutral fusing
• Do not put your fingers inside the print mechanism when the power
is on.
• Place the printer on an even surface which can support its weight of
approximately 13 kg (28.7 pounds) plus supplies.
• Do not spray the printer with water. If you are using a hose to clean
the premises in an industrial environment, remove the printer or
protect it carefully from spray and moisture.
• Carefully read the warning text on the envelope before using a
cleaning card.
Product Identification
e machine labels are attached to the printer’s rear plate and contain
information on type, model, and serial number as well as AC voltage.
is document provides warnings regarding personal safety during
operation of the printer.
2 EasyCoder PD41 Printer Safety Instructions
Safety Warnings
13.5 kg
30 pounds
Isopropyl Alcohol
(CH3)2CHOH
CAS 67-63-0
Dangerous
Voltage
EasyCoder PD41 Printer Safety Instructions 3
Safety Warnings
Dangerous
Voltage
Intermec Technologies Corporation
Corporate Headquarters
6001 36th Avenue West
Everett, WA 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
*1-960662-00*
EasyCoder PD41 Printer Safety Instructions
*1-960XXX-00*
Other manuals for EasyCoder PD41
13
Table of contents
Other Intermec Printer manuals
Intermec
Intermec PB21 User manual
Intermec
Intermec PF8D User manual
Intermec
Intermec PF8D User manual
Intermec
Intermec EasyCoder 201II User manual
Intermec
Intermec 4820F User manual
Intermec
Intermec PM23c User manual
Intermec
Intermec PB3 Series User manual
Intermec
Intermec 3240 User manual
Intermec
Intermec EasyCoder PD41 Guide
Intermec
Intermec PR2 User manual
Intermec
Intermec PK80 Series User manual
Intermec
Intermec EasyCoder PD41 User manual
Intermec
Intermec EasyCoder PF4i User manual
Intermec
Intermec EasyCoder PX4i User manual
Intermec
Intermec PB3 Series User manual
Intermec
Intermec EasyCoder PL3 User manual
Intermec
Intermec 6822P User manual
Intermec
Intermec 6820 Series User manual
Intermec
Intermec EasyCoder C4 Manual
Intermec
Intermec PB42 User manual
