Intermec M90 Series User manual
M90 Series Portable Data Entry Unit
USER’S GUIDE
""""""""""""""""""""""""""""
P/N: M90901
Revision C
September 2001
"NOTICE The information contained herein is proprietary and is provided solely for the
purpose of allowing customers to operate and service Intermec manufactured
equipment and is not to be released, reproduced, or used for any other purpose
without written permission of Intermec.
Disclaimer of Warranties. The sample source code included in this document is
presented for reference only. The code does not necessarily represent complete,
tested programs. The code is provided “AS IS WITH ALL FAULTS.” ALL
WARRANTIES ARE EXPRESSLY DISCLAIMED, INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
We welcome your comments concerning this publication. Although every effort has
been made to keep it free of errors, some may occur. When reporting a specific
problem, please describe it briefly and include the book title and part number, as
well as the paragraph or figure number and the page number.
Produced by:
Intermec International Inc.
Sovereign House
Vastern Road
Reading RG1 8BT
UK
ANTARES, INTERMEC, NORAND, NOR*WARE, PEN*KEY, ROUTEPOWER,
TRAKKER, and TRAKKER ANTARES are registered trademarks and
ENTERPRISE WIRELESS LAN, INCA, Mobile Framework, MobileLAN, TE 2000,
UAP, and UNIVERSAL ACCESS POINT are trademarks of Intermec Technologies
Corporation.
INTERMEC INTERNATIONAL CORPORATION 1994
Acknowledgments
AS/400, IBM, IBM PC, Micro Channel, PS/2, and OS/2 are registered trademarks
and AIX and Presentation Manager are trademarks of International Business
Machines Corporation.
CP/M-80 is a registered trademark of Digital Research, Inc.
Intermec International Inc. is a subsidiary of Intermec Technologies Corporation,
U.S.A.
Microsoft, MS, and MS-DOS, and Windows, are registered trademarks and Visual
Basic for Windows, and Windows for Pen are trademarks of Microsoft Corporation.
Turbo Pascal is a registered trademark and Borland C and C++ for Windows are
trademarks of Borland International, Inc.
M90 Series Portable Data Entry Unit User’s Guide i
CONTENTS
""""""""""""""""""""""""""""
M90 PDE Unit
Introduction 1.........................................
General 1.........................................
Customized Version 2..............................
Technical Description 2.............................
Customer Support 3................................
Factory Service 3...............................
Web Site 3.....................................
Start Up of New M90 PDE Unit 4.......................
Main Battery Replacement 5........................
Backup Battery Replacement 6.....................
Downloading from Host Computer 7.................
Kermit Communications Program 7..............
Windows Hyper Terminal Method 7..............
Set up Host Computer 8.....................
Set up Protocol via Hyper Terminal 11.........
Download the Program MYPROG.EXE to
the M90 PDE Unit 12....................
Review Hyper Terminal Settings 14...........
Operation, General 15..................................
On/Off 15..........................................
Keyboard 15........................................
Ready Mode 15.....................................
User Mode 16.......................................
Special Keys 17.....................................
Enter Data 17......................................
Key Entry 18...................................
Bar Code Reader Entry 18.......................
Downloading Data from Host Computer 18........
Start Application Program 18........................
CONTENTS
ii M90 Series Portable Data Entry Unit User’s Guide
Battery Replacement 19.................................
Replacing Main Battery 19..........................
Replacing Backup Battery 19........................
Battery Life 20.....................................
Peripherals 21.........................................
Modem Cable 21....................................
PC Cable 21........................................
Bar Code Wands 21.................................
Dock 21............................................
Vehicle Dock 22.....................................
Battery Pack Charging 22...........................
Regular Battery Charging 23.....................
Quick Charging of Battery in M90 PDE Unit 24....
Quick Charging of Battery Outside M90 PDE 25...
Maintenance 26........................................
Fault Finding and Error Codes 26.......................
No Text in Display 26...............................
M90 PDE Unit Locked in Position 26.................
FIGURES
Figure 1-1 Sliding Main Battery in M90 5...............
Figure 1-2 Backup Battery in M90 Without Cover 6......
Figure 1-3 Connecting M90 to AC Wall Outlet Via
DC Power Adapter 23...............................
Figure 1-4 Connecting Dock to AC Wall Outlet 24.........
Figure 1-5 Dock Chamber and Pocket 25.................
TABLES
Table 1-1 Kermit Server Program Commands 7..........
INDEX
M90 Series Portable Data Entry Unit User’s Guide 1
M90 PDE Unit
""""""""""""""""""""""""""""
INTERMECRhand-held terminals are used in a variety of
applications throughout the world whenever data needs to
be collected.
Introduction
The M90 Portable Data Entry (PDE) Unit is one of the
most versatile and flexible data collection devices available
today.
Your M90 PDE unit comes with sufficient memory for most
data collection applications with added features to ensure
data storage integrity, barcode scanning, and communica-
tion options.
Intermec International Inc. of Intermec Technologies Corpo-
ration hopes that this manual will help you get acquainted
with the M90 features and allow you maximum productiv-
ity and satisfaction from using this unit.
General
The M90 PDE unit allows you to enter data with the key-
board or integrated barcode scanner. Pen and paper are
now redundant. The stored data is later transferred to your
host computer either directly via a cable or over the tele-
phone network via a modem.
M90 PDE Unit
2M90 Series Portable Data Entry Unit User’s Guide
Customized Version
Your M90 PDE unit has more than likely been adapted to
suit your specific requirements. This has been achieved by
programming your unit with your special version of the
M90 program. The functions described in this manual can
therefore vary from your customized version. For details,
refer to separate instructions supplied by your System Part-
ner.
Technical Description
Keyboard 25 keys
Display 100x65 pixel LCD mono screen
Text modes 4x12 or 8x16 characters
Backlighting LED
Dimensions Length: 176 mm
Height: 27 mm
Width: 52 mm
Weight 245g with batteries
Temperature Operate: --10 to 50_C
Storage: --20 to 70_C
Humidity 10 to 95% RH (noncondensing)
Memory 256 KB Flash ROM (for O/S and application)
2 MB internal SRAM
The SRAM can be setup as RAM disk, program space,
or any combination thereof.
Power Supply 1500 mAh NiMH rechargeable removable pack
Battery caddy for two AA cells (optional)
Battery caddies are not available for units
with CCD scanners
CR2032 backup battery
Operation Time One bar code scan every five seconds
12 to 14 hours with laser scanner
7 to 8 hours with CCD scanner
M90 PDE Unit
M90 Series Portable Data Entry Unit User’s Guide 3
Data Retention 11 weeks on main battery, two years on backup
Time battery (normal temperature)
Data Transmission Asynchronous RS-232 level serial port capable of
speeds up to 57600 bps. (RJ-45 socket on unit or
Office dock, Kermit as standard program download)
RS-485 Local Area Network via depot dock
Real Time Clock Built-in real time clock with calendar.
Software MS-DOS emulation operating system, subset of
version 3.
Supported Program Languages are Microsoft C
versions 6 and up, Borland C++ versions 3 and up,
Borland Turbo Pascal versions 6 and up
Accessories SExternal Tethered scanning capability
SSerial interface cable
SCharger
SVehicle dock
SDepot dock
SOffice dock
SAA battery cell caddy
Battery caddies are not available for units
with CCD scanners
Customer Support
Factory Service
If your unit is faulty, you can ship it to the nearest
authorized Service Center for factory-quality service.
Web Site
Visit our Web site at http://www.intermec.com to download
many of our current manuals in PDF format. To order
printed versions of the Intermec manuals, contact your lo-
cal Intermec representative or distributor.
M90 PDE Unit
4M90 Series Portable Data Entry Unit User’s Guide
Start Up of New M90 PDE Unit
Before you can use the M90 PDE unit after unpacking it,
you must do two things:
1. Insert the main batteries and wait for the prompt to
appear in the “Ready” mode.
2. Start the internal program by loading an application
program from a host computer.
"NOTE: It is only necessary to follow these steps once after taking delivery of
the M90. If your M90 is delivered with inserted batteries and applica-
tion program these procedures normally do not apply.
On the next two pages are instructions for replacing either
the main battery or the backup battery. Have the M90
poweredoffandturnedovertothebackbeforestartingei-
ther procedure.
M90 PDE Unit
M90 Series Portable Data Entry Unit User’s Guide 5
Main Battery Replacement
1. Slide tab from right to left (see Figure 1-1).
2. Slide the main battery pack down and out from the
battery compartment.
3. Insert the new main battery pack up into the battery
compartment.
4. Slide the tab from left to right to secure the battery.
Tab
Figure 1-1
Sliding Main Battery in M90
M90 PDE Unit
6M90 Series Portable Data Entry Unit User’s Guide
Backup Battery Replacement
"NOTE: The main battery must remain in place during replacement of the
backup battery, otherwise the data in the RAM will be lost.
1. Unscrew and remove the backup battery cover with a
Phillips screwdriver, then carefully remove the old
lithium battery.
2. Insert a new lithium battery into the holder. Be sure
to align the “+” symbol on the lithium battery with the
screw hole in the M90 (see Figure 1-2).
3. Securely tighten the backup battery cover back onto
the M90.
Observe this orientation!
Screw
Backup Battery Cover
Figure 1-2
Backup Battery in M90 Without Cover
Other manuals for M90 Series
1
Table of contents
Other Intermec PDA manuals
Intermec
Intermec 600 Series 602 User manual
Intermec
Intermec CK30 User manual
Intermec
Intermec CK 70 User manual
Intermec
Intermec CK60 Ethernet Multidock Manual
Intermec
Intermec 6212 User manual
Intermec
Intermec NORAND 6642 Use and care manual
Intermec
Intermec Trakker Antares 2420 Manual
Intermec
Intermec PEN*KEY 6620 Use and care manual
Intermec
Intermec CK60 Ethernet Multidock Manual
Intermec
Intermec Trakker Antares 2425 User manual
Intermec
Intermec PEN*KEY 6400 User manual
Intermec
Intermec 6210 User manual
Intermec
Intermec Trakker Antares 2400 User manual
Intermec
Intermec CN4 User manual
Intermec
Intermec CN3E Series User manual
Intermec
Intermec PEN*KEY 6100 User manual
Intermec
Intermec PEN*KEY 6400 Manual
Intermec
Intermec 700 Series 730B User manual
Intermec
Intermec JANUS JG2010 User manual
Intermec
Intermec CN3E Series Guide
