Intermec 6640 Programming manual

NPN: 962-054-014

Revision A

September 1999

Model 6640

QUICK-START Instructions

You must charge the main battery and make all connections to the computĆ

er prior to firstĆtime use. These instructions include battery installation

and connector locations. See the Model 6640 User s Guide, P/N 961Ć054Ć018

for detailed instructions.

Battery Installation

1. Open the battery compartment door by pressing the latch tab

and pulling outward on it.

2. Align the battery pack to the opening with connectors facing into

the computer and the pull ring oriented as shown in the illustraĆ

tion below.

3. Slide the battery pack into the computer.

4. ress firmly INWARD and slightly down on the battery pack to

secure it in place.

5. Reinstall the battery compartment door.

6. Close battery door until latch tab clicks" into place.

BCAUTION: Fully charge the main battery before using the computer away from an

external power source.

BCAUTION: Close and secure compartment doors before using computer.

1. Pull ring

2. Main battery pack

3. Latch tab, battery compartment door

1

2

3

NPN: 962-054-014

Revision A

September 1999

*962054014*

1. Power On/Off switch

2. Suspend/Resume switch

3. Variety of connectors available.

2

1

1. DC Input connector

2. Pen connector

3. USB connector

1

2

3

3

Top View

(right) Side View

A variety of I/O connectors is available for the inset area shown below. Those

found on your computer may vary from this illustration. The docking connecĆ

tor is located on the back of the computer. Make all connections before powerĆ

ing the unit ON. The USB connector does permit hot swap" connections.

The On/Off switch is a true power switch and will reset the computer if a lockup occurs.

Always perform a proper Windows shutdown before powering the unit OFF.

You can press the Suspend/Resume switch for a full oneĆsecond to reduce power

consumption during idle periods. This will keep the application program live

and ready to Resume the next time you press the Suspend/Resume switch for

one full second.

Connectors

Other manuals for 6640

5

Table of contents

Other Intermec PDA manuals

Intermec

Intermec 6110 User manual

Intermec

Intermec PEN*KEY 6620 Use and care manual

Intermec

Intermec 6651 User manual

Intermec

Intermec CN4 User manual

Intermec

Intermec CT60 Manual

Intermec

Intermec M90 Series User manual

Intermec

Intermec Trakker Antares 2460 User manual

Intermec

Intermec CN70 RFID User manual

Intermec

Intermec Trakker Antares 2480 User manual

Intermec

Intermec CN51 User manual

Intermec

Intermec PEN*KEY 6200 User manual

Intermec

Intermec 5023 User manual

Intermec

Intermec Trakker Antares 2400 User manual

Intermec

Intermec 6650 User manual

Intermec

Intermec 6500 Use and care manual

Intermec

Intermec Trakker Antares 2410 User manual

Intermec

Intermec 5023 Installation and operating instructions

Intermec

Intermec 5055 Use and care manual

Intermec

Intermec Trakker Antares 2420 User manual

Intermec

Intermec Trakker Antares 2410 Manual

Intermec

Intermec CN3E Series User manual

Intermec

Intermec Trakker Antares 2420 Manual

Intermec

Intermec Trakker Antares 2455 Manual

Intermec

Intermec JANUS JG2050 User manual

Popular PDA manuals by other brands

SPOT

SPOT SPOT user guide

Palm

Palm handheld Getting started guide

Winmate

Winmate E500QK user guide

Getac

Getac PS236 Specifications

Sharp

Sharp CE-1600P Operation manual

HTC

HTC PHAR100 user manual

Mindeo

Mindeo M40 Reference manual

Acer

Acer n30 manual

ASCOM

ASCOM 9D24 EX brochure

Unitech

Unitech PA520BTNF user manual

HandHeld

HandHeld Nautiz X3 user manual

Casio

Casio PALM manual

Sharp

Sharp TM-20 Software guide

Atid

Atid AT870 quick guide

AML

AML M7225 user guide

Audiovox

Audiovox Maestro Quick start card

Casio

Casio PV-750 Plus Function guide

Unitech

Unitech PT630 Programming reference guide