Ikelite EOS-40D User manual

Port Lock

IKELITE

Thank you for your purchase of kelite equipment. Please read this

instruction manual completely before attempting to operate or dive with this

product.

SLR-DC Housing

i n s t r u c t i o n m a n u a l

6870.50 Canon EOS 40D, 50D

Table of Contents

Product Registration........................................................P. 3

ackage Contents ......................................................P. 3

reparation ..................................................................P. 3

Parts of the Housing / Size and Weight ..........................P. 4

nitial Camera Setup........................................................P. 6

Opening the Housing ......................................................P. 6

nstalling the Camera ......................................................P. 7

Setting the Conversion Circuitry Strobe D Switch..........P. 7

Attaching the Flash Connection for External Strobes ....P. 8

nstalling Camera in Housing ..........................................P. 8

Closing the Housing ........................................................P. 9

nstalling Zoom Clamp and Gear Sleeve ........................P. 10

nstalling the Port ............................................................P. 15

Housing Conversion Circuitry..........................................P. 17

DS50 and DS125 Substrobe Compatibility ....................P. 18

Using Non- kelite or kelite Non-DS Substrobes ............P. 18

Usage ..........................................................................P. 19

Pre-Dive your System ....................................................P. 19

Lubricants ........................................................................P. 19

Troubleshooting ........................................................P. 20

Replacement arts ....................................................P. 22

Recommended Accessories ....................................P. 22

Accessory Mounting Points / EV-Controller Use ............P. 22

Maintenance ................................................................P. 23

Photo Tips ......................................................................P. 26

Storing the Housing ........................................................P. 27

Technical Support ....................................................P. 27

Limited Warranty ........................................................P. 27

Returning Products for Service ......................................P. 28

- SLR-DC Housing

- Envelope containing tray

installation hardware,

maintenance kit, and extra

control end tips.

ackage Contents

- Aluminum Tray & Dual Handles

- Silicone Lubricant

- Std. Zoom Clamp & Sleeve Set

- #5509.28 Large Diameter Zoom

Clamp & Sleeve Set

roduct Registration

Please take a moment to fill out the online Ikelite roduct Registration

form at http://www.ikelite.com/forms/regForm.htm.

This product has been water pressure tested at the factory and is depth

rated to 200 ft. (60m). Thoroughly inspect and immerse the empty

housing completely in water before installing a camera. f any fogging

occurs or droplets of water enter the housing, do not install a camera.

Clean the housing main o-ring and retest to make sure that it is

watertight. Refer to the Troubleshooting section, page 20.

We suggest that you read this instruction booklet thoroughly before use

to have a full understanding of where each camera control is located,

and what function each control provides. Please read your camera

manual thoroughly to have a full understanding of each camera function.

f you are new to underwater photography, be sure to read the Photo

Tips section.

Due to the power required to operate the camera and LCD screen start

each dive with a fully charged camera battery.

reparation

arts of the Housing - Front View

Handle

Shutter

Release

LCD lluminator

Main Dial

Lid

Snap

Side View

Gear

Sleeve

Optional

Port

Port O-ring

Main Housing

O-ring

Camera Tray

Camera Mounting Bolt

Aluminum Tray

WB/Metering Mode

Shutter

Release

AF-ON

Main Dial

Port Lock

AF/Drive Mode

Zoom

Control

AF/ON

Tra y Leveling Screw (factory preset)

Port Lock

IKELITE

ort

Opening

Gear Sleeve

Drive Gear

1413

910 11

15 16

Back View

Lens

Release

/DOF

AF-ON

Quick

Release

Button

1. External Strobe Connector

and Waterproof Cap

2. Menu

3. Live View (50D only)

4. Optical Viewfinder Port

5. AE/FE Lock

6. AF Point Select

7. Set

8. Quick Control Dial

9. Playback

10. Erase

11. Jump or nfo

12. nfo or Picture Style

13. Picture Style or Function

14. On/Off

15. Flash Mode “-” Compensation

16. Flash Mode “+” Compensation

Width ................10 in. (250mm) including controls

..........................13.5 in. (343mm) with Tray and Handles

Height ..............6.7 in. (170mm) including controls

..........................7.1 in. (180mm) with Tray and Handles

Depth ................6.5 in. (165mm) including controls

Weight ..............5.4 lb. (2449g) housing only

..........................7.2 lb. (3266g) housing with tray & handles

Buoyancy ..........Neutral to slightly negative in freshwater (dependent on

..........................choice of lens and lens port)

Size and Weight

Shutter

Release

SO/Flash Exp.

Zoom Dial

Opening the Housing

Lid Snaps have a Lock. To open,

push Lid Snap Lock forward and lift

as shown. Keep pressure on the Lid

Snap so it does not fly open quickly.

Some Lid Snaps have a lot of spring

tension once they go over center, so

have a firm grip on the Lid Snap. Lid

Snaps may be opened one at a time.

Lift

Push Forward

Lid Snap Lock

Initial Camera Setup

- nsert a fully charged battery.

- nsert memory card (2GB or greater capacity recommended).

- Set the mode dial to “M” manual.

- Set shutter speed to 1/60th second or 1/125th second for fast

moving subjects.

- Set aperture to F8 for general photography or F22 for macro

photography (close-ups).

- Set Quality to highest jpeg setting or RAW.

- Set SO to 100 and Meter to “center-weighted.”

- Set Review time to 8 seconds.

- Set White Balance to Auto “AWB.”

- Set auto-focus mode to “One Shot.”

- Set Red-eye On/Off to “OFF.”

- Set Auto power off to 8 or 15 minutes.

- Set “Highlight Tone Priority” to “Disable” in camera menu C.Fn :image,

screen #3.

Installing the Camera

Remove the back from the housing. The mounting tray for the camera is

secured to the housing back. Position the camera and lens on the

camera tray, and then

secure it with the Hold-down

bolt which threads into the

camera’s tripod socket.

Use a flathead screwdriver

(recommended) or coin to

tighten the Hold-down bolt

so the camera bottom is

flush against the tray.

Note: Conversion Circuitry

Strobe D Switch is located

on bottom of camera tray.

Setting the Conversion Circuitry Strobe ID Switch

On the bottom of the camera tray is a switch for setting the DS Substrobe

D. Set the switch to the Model of DS Substrobe being used.

When using dual strobes of different models such as a DS51 and a

DS161, set the D switch to DS51 or the smaller strobe.

125

160/161

Set

DS Substrobes

to TTL Mode

50/51

200

TIGHTEN HOLDOWN BOLT

WITH COIN

OR SCREWDRIVER

50D

EOS

CANON

Hold-down Bolt

Camera Tray

Strobe D Switch

Attaching the Flash Connection for External Strobes

When using an external strobe, connect the housing Hotshoe Connector.

Slide the Connector into the Hotshoe Mount on the camera from the back

of the camera as shown. Slide the Connector forward until it stops. This

can be done

before or

after the

camera is

secured

with the

Hold-down

bolt.

Caution:

Do not remove the External Strobe Connector’s waterproof cap unless an

external sync cord is going to be plugged in. Do not remove waterproof

cap or sync cord underwater.

Installing Camera in Housing

Before installing the camera, pull out on the controls in the front section of

the housing. This will allow the camera to slide in easier. Once the camera

is installed and the lid snaps have been closed, return the controls to their

operating position.

External Strobe Connector and

Waterproof Cap

Housing Back

Hotshoe

Connector

Hotshoe

Mount

Closing the Housing

1. Place housing face down in your lap.

2. Check to see that there is an o-ring on

the housing back that is clean and in its

proper location.

3. Guide the back onto the housing. The

o-ring should touch the housing all the

way around. There should

be an even gap all the way around

between the housing and the housing

back.

4. Lift the lid snaps so they are extended

and place the lid snap into the

corresponding hook on the housing back.

5. To close the housing, push down on the

lid snaps until they snap into place.

Lid snaps on opposite sides of

the housing should be closed

at the same time. Be sure they

are down far enough to engage

the lid-snap lock.

Double check - Once the housing is closed,

check the o-ring seal. Check the gap between the housing back and the

housing, it should be even all the way around.

Look through the clear plastic back at the o-ring. You should see a

darkened area where the o-ring is compressed against the housing

back. f you do not see an even black compression seal all the way

around the back, open the lid snaps, reseat the housing back, and then

close the lid snaps. Visually check the seal again.

O-ring

Housing Back

Housing back

Housing

O-ring

Even gap

all 4 sides

reparing to Install Zoom Clamp & Gear Sleeve

Determine the type

of lens being used

on the camera.

Type 1 Lenses have

a lens opening that

is NOT larger in

diameter than the

zoom ring. (Fig. 1).

Type 2 Lenses have a lens

opening that S larger in diameter than the zoom ring. (Fig. 2).

Zoom Clamps & Gear Sleeves Included with Housing

There are 2 different

Zoom Clamps and

Gear Sleeves

provided with the

housing. Start with

the suggested Zoom

Clamp and Gear

Sleeve depending

on the Type of

lens being used.

See (Fig. A or B)

lens

opening

zoom

ring

bayonet

mount

Type 1 lens Type 2 lens

(Figure 1) (Figure 2)

Normally used with

Type 1 lens (Fig.1)

#9059.8 small diameter clamp:

For use with #0073 sleeve

#0073 sleeve: Use with

small diameter zoom clamp

#9059.8

Figure A

Normally used with

Type 2 lens (Fig.2)

#5509.28 Package

#9059.9 large diameter clamp:

For use with #0073.1 sleeve

#0073.1 sleeve: Use with

large diameter zoom clamp

#9059.9

Figure B

thick ribs thin ribs

wide

grooved

extension

tabs

narrow

grooved

extension

tabs

This manual suits for next models

Table of contents

Other Ikelite Camera Accessories manuals

Ikelite

Ikelite SX10 IS User manual

Ikelite

Ikelite 75301 User manual

Ikelite

Ikelite 6210.09 Sony DSC-WX9 Owner's manual

Ikelite

Ikelite 6170.70 User manual

Ikelite

Ikelite 6184.7 User manual

Ikelite

Ikelite Digital Housing User manual

Ikelite

Ikelite DSC-W5 User manual

Ikelite

Ikelite 5510.45 User manual

Ikelite

Ikelite 4402 User manual

Ikelite

Ikelite SLR-DC Housing User manual

Ikelite

Ikelite 6242.60 Canon SX600 HS User manual

Ikelite

Ikelite 71301 User manual

Ikelite

Ikelite Canon IXUS 950 IS User manual

Ikelite

Ikelite 6043 Owner's manual

Ikelite

Ikelite 6241.25 User manual

Ikelite

Ikelite PowerShot A610-A620 User manual

Ikelite

Ikelite 6130.80 User manual

Ikelite

Ikelite 6280.31 Owner's manual

Ikelite

Ikelite DLM200 User manual

Ikelite

Ikelite Olympus SP-350 Operating and maintenance manual

Ikelite

Ikelite 71005BK User manual

Ikelite

Ikelite DSC-H3 User manual

Ikelite

Ikelite EOS 5D Mark II - EOS 5D Mark II 21.1MP Full Frame CMOS Digital SLR... User manual

Ikelite

Ikelite SLR-DC 6812.31 User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions