IFM PN3 Series User manual

Operating instructions
Electronic pressure sensor
PN3xxx
80282884 / 00 05 / 2019
UK

2
Contents
1 Preliminary note���������������������������������������������������������������������������������������������������3
1�1 Symbols used ������������������������������������������������������������������������������������������������3
2 Safety instructions �����������������������������������������������������������������������������������������������4
3 Functions and features ����������������������������������������������������������������������������������������4
3�1 Application area ���������������������������������������������������������������������������������������������5
4 Function���������������������������������������������������������������������������������������������������������������6
4�1 Operating modes �������������������������������������������������������������������������������������������6
4�2 Communication, parameter setting, evaluation ���������������������������������������������8
4�3 Switching function������������������������������������������������������������������������������������������8
4�4 Analogue function ������������������������������������������������������������������������������������������9
4�5 IO-Link ���������������������������������������������������������������������������������������������������������10
4�5�1 General information ����������������������������������������������������������������������������10
4�5�2 Functions that are only available via IO-Link communication�������������10
5 Installation����������������������������������������������������������������������������������������������������������10
6 Electrical connection������������������������������������������������������������������������������������������ 11
7 Operating and display elements ������������������������������������������������������������������������12
8 Menu������������������������������������������������������������������������������������������������������������������13
8�1 Menu structure: Main menu�������������������������������������������������������������������������13
8�2 Explanation of the menu������������������������������������������������������������������������������14
8�2�1 Explanation of menu level 1 ���������������������������������������������������������������14
8�2�2 Explanation of menu level 2 ���������������������������������������������������������������14
9 Parameter setting ����������������������������������������������������������������������������������������������15
9�1 Parameter setting in general �����������������������������������������������������������������������15
9�2 Define the operating mode (optional) ����������������������������������������������������������17
9�3 Configure display (optional)�������������������������������������������������������������������������18
9�4 Set output signals ����������������������������������������������������������������������������������������18
9�4�1 Set output functions����������������������������������������������������������������������������18
9�4�2 Define switching limits for the hysteresis function ������������������������������18
9�4�3 Set switching limits for the window function ��������������������������������������19
9�5 User settings (optional)��������������������������������������������������������������������������������19
9�5�1 Defining the delay time for the switching output ���������������������������������19
9�5�2 Set damping for the switching signal ��������������������������������������������������20

3
UK
9�5�3 Set damping for the analogue output ������������������������������������������������20
9�5�4 Reset all parameters to factory setting �����������������������������������������������20
9�5�5 Set colour change of the display �������������������������������������������������������20
9�5�6 Graphical depiction of the colour change of the display ���������������������22
9�6 Diagnostic functions ������������������������������������������������������������������������������������23
9�6�1 Read min/max values for the system pressure ����������������������������������23
9�6�2 Reading the overload processes ��������������������������������������������������������24
10 Operation���������������������������������������������������������������������������������������������������������24
10�1 Read the set parameters ���������������������������������������������������������������������������24
10�2 Self-diagnostics / fault indications �������������������������������������������������������������25
11 Technical data and scale drawing ��������������������������������������������������������������������26
11�1 Setting ranges��������������������������������������������������������������������������������������������26
11�1�1 Setting ranges in operating mode 2��������������������������������������������������26
11�1�2 Setting ranges in operating mode 3��������������������������������������������������27
11�2 Further technical data �������������������������������������������������������������������������������28
12 Factory setting �������������������������������������������������������������������������������������������������29
1 Preliminary note
1.1 Symbols used
►Instruction
> Reaction, result
[…] Designation of keys, buttons or indications
→Cross-reference
Important note
Non-compliance may result in malfunction or interference
Information
Supplementary note

4
2 Safety instructions
• The device described is a subcomponent for integration into a system�
- The manufacturer is responsible for the safety of the system�
- The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system� This documentation
must contain all necessary information and safety instructions for the operator,
the user and, if applicable, for any service personnel authorised by the
manufacturer of the system�
• Read this document before setting up the product and keep it during the entire
service life�
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions�
•Only use the product for its intended purpose (→ Functions and features).
•Only use the product for permissible media (→ Technical data).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur�
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator�
•Installation, electrical connection, set-up, programming, configuration, operation
and maintenance of the product must be carried out by personnel qualified and
authorised for the respective activity�
• Protect units and cables against damage�
• If the devices are used in gas applications with pressures > 25 bar, the
information in chapter 3�1 for devices with the marking **)must be absolutely
observed!
3 Functions and features
The device monitors the system pressure of machines and installations�

5
UK
3.1 Application area
Type of pressure: relative pressure
Order number Measuring range
Pressure rating
(max� permissible
pressure) *)
Bursting pressure
bar psi bar psi bar psi
Pressure sensors with internal G¼ thread
PN3160 0���600 0…8700 800 11580 2500 36250
PN3070 0���400 0…5800 800 11580 1700 24650
PN3071 0���250 0…3620 500 7250 1200 17400
PN3092** 0���100 0…1450 300 4350 650 9400
PN3093** 0���25 0…362 150 2175 350 5075
PN3094** -1���10 -14�5…145 75 1087 150 2175
PN3096 0���2�5 0…36�2 20 290 50 725
PN3097 0���1 0…14�5 10 145 30 450
PN3129 -1���0 -14�5���0 20 290 50 725
Pressure sensors with external G¼ thread
PN3560 0���600 0…8700 800 11580 2500 36250
PN3570 0���400 0���5800 800 11580 1700 24650
PN3571 0���250 0���3620 500 7250 1200 17400
PN3592** 0���100 0���1450 300 4350 650 9400
PN3593** 0���25 0���362 150 2175 350 5075
PN3594** -1���10 -14�5���145 75 1087 150 2175
PN3596 0���2�5 0���36�2 20 290 50 725
PN3597 0���1 0���14�5 10 145 30 450
PN3529 -1���0 -14�5���0 20 290 50 725
*) With static overload pressure or max� 100 million pressure cycles�
**) Use devices with a measuring range ≥ 250 bar for gas applications > 25 bar! For a
measuring range of 0���100 bar the PN7 series (PN7072 or PN7572) with 2 switch points
can be used for gas applications�
MPa = (measured value in bar) ÷ 10
kPa = (measured value in bar) x 100

6
Avoid static and dynamic overpressure exceeding the indicated pressure
rating by taking appropriate measures�
The indicated bursting pressure must not be exceeded�
Even if the bursting pressure is exceeded only for a short time, the unit
may be destroyed� CAUTION: Risk of injury!
The units are vacuum resistant�
Pressure Equipment Directive (PED):
The units comply with the Pressure Equipment Directive and are designed
and manufactured for group 2 fluids in accordance with the sound
engineering practice�
Use of media from group 1 fluids on request�
4 Function
• The unit displays the current system pressure�
• It generates output signals according to the operating mode and the parameter
setting�
• It moreover provides the process data via IO-Link�
• The unit is designed for fully bidirectional communication�
So, the following options are possible:
- Remote display: reading and display of the current system pressure�
- Remote parameter setting: reading and changing the current parameter
setting�
- IO-Link parameter setting (→ 4.5)�
4.1 Operating modes
Operating mode 2
Description Operating mode on delivery�
Application Standard applications�
Designation IODD Example PN3070 Factory setting / (CMPT=2): At www�ifm�com in
the download area of the corresponding article�

7
UK
Operating mode 3
Description High IO-Link process value and parameter resolution
(device-specific: see operating mode of the corresponding IODD)�
The menu points [ou1] and [ou2] are extended by the setting
option [OFF] (→ 9.4.1)�
IO-Link standard command "flashing" is available
(→ 4.5.2)�
This operating mode is available as from device status BA�
The device status is indicated on the unit�
BA xxxx
PNxxxx
Application Better controllability via IO-Link�
Highly granular setting of switch-on and switch-off points�
Designation IODD Example PN3070 Status_B High Resolution / (CMPT=3): At
www�ifm�com in the download area of the corresponding article�
Manual operating mode selection, see (→ 9.1),
selection of the operating mode via IO-Link interface see
→ Additional document: Selection of the operating mode, at www.ifm.com.

8
4.2 Communication, parameter setting, evaluation
OUT1 (pin 4) • Switching signal for system pressure limit
• Communication via IO-Link
OUT2 (pin 2) • Analogue signal 4���20 mA / 0���10 V
4.3 Switching function
OUT1 changes its switching state if it is above or below the set switching limits
(SP1, rP1)� The following switching functions can be selected:
• Hysteresis function normally open: [ou1] = [Hno] (→ Fig. 1).
• Hysteresis function normally closed: [ou1] = [Hnc] (→ Fig. 1).
First set the set point (SP1), then the reset point (rP1)�
The resulting hysteresis remains even if SP1 is changed again�
• Window function normally open: [ou1] = [Fno] (→ Fig. 2).
• Window function normally closed: [ou1] = [Fnc] (→ Fig. 2).
The width of the window can be set by means of the difference between FH1
and FL1� FH1 = upper value, FL1 = lower value�
FH
FL
1 2
P = system pressure; HY = hysteresis; FE = window
When set to the window function, the set and reset points have a fixed
hysteresis of 0�25 % of the measuring span�

9
UK
4.4 Analogue function
OUT2 is an analogue output:
• [ou2] defines whether the set measuring range is provided as 4���20 mA ([ou2]
= [I]) or as 0���10 V ([ou2] = [U])�
PN3094 and PN3594:
Analogue signal 4���20 mA / 0���10 V corresponds with the measuring range
of 0���10 bar�
Negative pressure values cannot be represented via the analogue output
for the indicated units�
Current output 4...20 mA Voltage output 0 ... 10 V
P = System pressure
MEW = final value of the measuring range
In the measuring range of the
corresponding unit, the output signal is
between 4 and 20 mA�
In the measuring range of the
corresponding unit, the output signal is
between 0 and 10 V�
The green LED also indicates:
• System pressure above the measuring
range: 20���20�5 mA
- Fault indication from 21�5 mA�
• System pressure below the measuring
range: 4���3�8 mA
The green LED also indicates:
• System pressure above the measuring
range: 10���10�3 V
- Fault indication from 11 V�

10
4.5 IO-Link
4.5.1 General information
This device has an IO-Link communication interface that requires an IO-Link
capable module (IO-Link master) for operation�
The IO-Link interface enables direct access to the process and diagnostic data
and provides the possibility to set the parameters of the unit during operation�
In addition, communication is possible via a point-to-point connection with a USB
adapter cable�
The IODDs necessary for the configuration of the unit, detailed information about
process data structure, diagnostic information, parameter addresses and the
necessary information about the required IO-Link hardware and software are
available at www�ifm�com�
4.5.2 Functions that are only available via IO-Link communication
• HIPC: number of overload processes (→ 9.6.2)�
• HIPS: threshold for the overload counter (→ 9.6.2)�
• Flashing: The sensor can be localised in the plant via this standard command�
When the command is used, the switching status LEDs will flash and the
device display will signal "IO-L"�
(Function is only available in operating mode [3])�
• Application Specific Tag: Freely definable text, assigned to the device�
• Plant identification code: Freely definable text, describes the device function in
the plant� (Function is only available in operating mode [3])�
• Location identification code: Freely definable text, describes the installation
location in the plant� (Function is only available in operating mode [3])�
For detailed information, please view the device-specific
IO Device Description PDF at www�ifm�com�
5 Installation
Before installing or removing the unit: Make sure that no pressure is
applied to the system�
►Insert the unit in a G¼ process connection�
Table of contents
Other IFM Accessories manuals

IFM
IFM Efector 160 LR70 User manual

IFM
IFM Efector 200 O5PG User manual

IFM
IFM UIT510 User manual

IFM
IFM GF854S User manual

IFM
IFM LR3009 User manual

IFM
IFM Efector 200 O7E2 Series User manual

IFM
IFM JD Series Application guide

IFM
IFM LMT 0 Series User manual

IFM
IFM efector 200 O4H5 Series User manual

IFM
IFM efector160 LR2750 User manual

IFM
IFM PN72 Series User manual

IFM
IFM efector 200 OGS38 Series User manual

IFM
IFM Efector 200 O5 User manual

IFM
IFM OF Series User manual

IFM
IFM Efector 500 PI2652 User manual

IFM
IFM Ecomat 100 EC2082 Guide

IFM
IFM KI0058 User manual

IFM
IFM DTI424 User manual

IFM
IFM JN2301 Application guide

IFM
IFM Efector 200 O6E3 User manual





















