IFM Electronic Efector230 User manual

Operating instructions

Ultrasonic diffuse reflective sensors

UG-

UGA

UGQ

80237716 / 00 04 / 2016

1 Preliminary note

1.1 Symbols used

►Instructions

> Reaction, result

→Cross-reference

Important note

Non-compliance may result in malfunction or interference.

Information Supplementary note.

2 Safety instructions

• Installation, electrical connection, set-up, operation and maintenance of the unit

must be carried out by qualified personnel authorised by the machine operator.

3 Functions and features

Ultrasonic sensors detect objects of various materials without any contact.

Depending on the selected sensor, detected objects are signalled via switching

outputs or their distance is indicated by means of a proportional analogue signal.

4 Installation

UG-xxx / UGAxxx UGQxxx

1: Status LED P1 (yellow)

2: Status LED P2 (yellow)

3: Echo LED (green)

4: Set button

►Position object.

►Align the ultrasonic sensor so that it directly faces the object or the background

and secure it to a bracket.

> Object / background is detected when the echo LED (green) lights.

Sound-absorbing surfaces have a negative effect on a reliable function.

During installation of the device, consider the blind zone.

5 Electrical connection

►Disconnect power.

►Connect device (depending on the type selected):

Core colours

2 1

2OUT2

L+

OUT1

OUT1: Switching output

BK Black

OUT2: Switching /

analogue output

BN Brown

BU Blue

WH White

Colours to DIN EN 60947-5-2

Technical data and further information at → www.ifm.com

6 Set-up

Note the LED behaviour for the set-up:

Echo LED green

On Echo is received.

Off No echo (object / background not detected).

Off For the time of resetting to factory setting.

Status LEDs yellow

LED 1 LED 2 Function acknowledgement

Flashes 1 Hz x x Programming mode active.

Flashes 2.5 Hz x x Setting distance P1 completed.

Flashes 4 Hz x x Setting distance P2 completed or

assignment acknowledgement of the setting.

Flashes 10 Hz x x Inverting the switching characteristics.

7 Settings

►Start programming mode of the device.

►Press button 2 s...6 s.

> LEDs flash (1 Hz).

If programming has not been completed successfully, the device returns to

the previous setting.

7.1 Window function, distance P1 > P2

►Object in position P1.

►Press button once 1 s.

> LEDs flash (2.5 Hz).

►Object in position P2.

►Press button once 1 s.

> LEDs flash (4 Hz).

B P2 P1

Output response of the switching outputs Output response of the switching /

analogue output

B P2 P1

X: Distance B: Blind zone

Y: Output response P1: Setting point 1 (OUT1)

①: OUT1 (switching output) P2: Setting point 2 (OUT2)

②: OUT2 (switching output / analogue output)

7.2 Hysteresis function, distance P1 = P2

►Object in position P1.

►Press button once 1 s.

> LEDs flash (2.5 Hz).

►Object in position P2.

►Press button once 1 s.

> LEDs flash (4 Hz).

B P1/P2

Output response of the switching outputs:

complementary

Output response of the switching /

analogue output

B P1/P2

7.3 Inverting the output response

►Press button > 6 s.

> LEDs flash (> 10 Hz).

> Output functions are inverted (NO becomes NC or vice versa).

7.4 Restore factory setting

►Align the device so that no echo is received.

►Go into the programming mode of the unit.

►Press button once for 1 s.

> LEDs flash shortly with 4 Hz.

8 Operation

►Check whether the unit operates correctly.

> Display by LEDs:

Green LED is lit. Echo is received.

Yellow LED P1 is lit. Output 1 is switched.

Yellow LED P2 is lit. Output 2 is switched.

Green LED flashes. Short circuit at the output.

The minimum distance between the “Proximity Switch Metal Enclosure“ and

any “External uninsulated live part“ shall be at least 12.7 mm.

Table of contents

Other IFM Electronic Accessories manuals

IFM Electronic

IFM Electronic Efector 250 O3M151 Owner's manual

IFM Electronic

IFM Electronic Efector 150 KNM User manual

IFM Electronic

IFM Electronic SM7000 User manual

IFM Electronic

IFM Electronic efector150 User manual

IFM Electronic

IFM Electronic efector 300 SU7200 User manual

IFM Electronic

IFM Electronic efector 200 OW Series User manual

IFM Electronic

IFM Electronic Efector 410 JN2100 Application guide

IFM Electronic

IFM Electronic efector 160 LR8300 User manual

IFM Electronic

IFM Electronic Efector 200 Installation guide

IFM Electronic

IFM Electronic SU7000 User manual

IFM Electronic

IFM Electronic efector160 LR7000 User manual

IFM Electronic

IFM Electronic Efector 100 series User manual

IFM Electronic

IFM Electronic efector 200 OT User manual

IFM Electronic

IFM Electronic Efector 200 O5H User manual

IFM Electronic

IFM Electronic LR8300 User manual

IFM Electronic

IFM Electronic PA32xx Series User manual

IFM Electronic

IFM Electronic efector 200 OGT Series User manual

IFM Electronic

IFM Electronic LR3000 User manual

IFM Electronic

IFM Electronic Efector 300 User manual

IFM Electronic

IFM Electronic LR8009 User manual

IFM Electronic

IFM Electronic efector 600 OWF User manual

IFM Electronic

IFM Electronic Efector 200 User manual

IFM Electronic

IFM Electronic ID000A User manual

IFM Electronic

IFM Electronic efectro 200 User manual

Popular Accessories manuals by other brands

Hillco

Hillco 2810 Operator's manual

Siemens

Siemens QSA2700D Basic documentation

Contours

Contours ZY024 manual

Saivod

Saivod VS621 manual

Virtuox

Virtuox VirtuCLEAN 2.0 user manual

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS user manual

Z-Wave

Z-Wave HSD-200Z user manual

turck

turck FMX-IM-2UPLI63FX quick start guide

Decagon Devices

Decagon Devices 10HS manual

UPPAbaby

UPPAbaby Cup Holder user manual

Elko

Elko SmartSensor Leakage Wireless manual

Grizzly

Grizzly H8371 instructions

Panasonic

Panasonic HG-T Series user manual

DigiDesign

DigiDesign 888/24 I/O installation guide

PROZIS

PROZIS QUAY user manual

patagonia

patagonia PSI Vest user manual

SFC Energy

SFC Energy EFOY GO! manual

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit instruction manual