IFM Electronic Efector230 UGA User manual

Operating instructions

Ultrasonic retro-reflective sensor

UGA

80237717 / 00 04 / 2016

1 Preliminary note

1.1 Symbols used

►Instructions

> Reaction, result

→Cross-reference

Important note

Non-compliance may result in malfunction or interference.

Information

Supplementary note.

2 Safety instructions

• Installation, electrical connection, set-up, operation and maintenance of the unit

must be carried out by qualified personnel authorised by the machine operator.

3 Functions and features

Ultrasonic retro-reflective sensor detect without any contact objects made of

various materials that interrupt the barrier. Detected objects are signalled via

switching output.

4 Installation

UGxxxx / UGAxxx

1: Status LED (yellow)

2: Echo LED (green)

3: Set button

4: Reflector

►Adjust the ultrasonic sensor to the reflector and secure it to a bracket.

> The reflector is detected when the echo LED (green) lights.

The functional specifications refer to a mild steel reflector defined by ifm, at

maximum range, with an edge length of 300 mm. The minimum size of the

reflector depends on the size of the object. For further information please

view "Basic information about installation and operation" → www.ifm.com.

When using ultrasonic reflective barriers, please observe the minimum

distances to the reflector → Technical data sheet!

5 Electrical connection

►Disconnect power.

►Connect the unit:

Core colours

2 1

EPS Source

Product Scale Drawing

Frame Size: 36 mm x 26 mm

AN_i_1474 Original Scale Drawing (MTD)

BN1

BK4

BU3

L+

OUT

BN1

BK4

BU3

L+

OUT

OUT: Switching output

BK black

BN brown

BU blue

Colours to DIN EN 60947-5-2

Technical data and more information at → www.ifm.com

6 Set-up

Note the LED behaviour for the set-up:

Echo LED green

On Echo is received.

Off No echo (reflector not recognised).

Off For the time of resetting to factory setting.

Status LED yellow

LED Function acknowledgement

Flashes 1 Hz Programming mode active.

Flashes 2.5 Hz Adjustment to the reflector finished.

Flashes >10 Hz Inverting the switching characteristics.

7 Settings

►Start programming mode of the device.

►Press button 2 s...6 s

> LED (yellow) flashes

(1 Hz).

If programming has not been completed successfully, the device returns to

the previous setting.

7.1 Adjust the unit to the reflector

►Press button for 1 s

> Yellow LED flashes

(2.5 Hz)

> The unit is ready for use.

7.2 Inverting the output response

►Press button > 6 s.

> LED (yellow) flashes (> 10 Hz).

> Output functions are inverted (NO becomes NC or vice versa).

7.3 restore factory setting

►Align the device so that no echo is received.

►Go into the programming mode of the unit.

►Press the button once for 1 s.

> LED (yellow) flashes briefly with 4 Hz.

> Function of the factory setting:

Sn = maximum range

OUT = output function normally open (NO)

8 Operation

►Check whether the unit operates correctly.

> Display by LEDs:

Green LED is lit The echo is received by the reflector.

Yellow LED on The object interrupts the ultrasonic reflective barrier, the output is

switched (output function NO).

Yellow LED on /

green LED off

Reflector is not detected (output function NO)

LED green flashes short circuit at the output.

The minimum distance between the "Proximity Switch Metal Enclosure"

and any "External uninsulated live part" shall be at least 12.7 mm.

Table of contents

Other IFM Electronic Accessories manuals

IFM Electronic

IFM Electronic Efector 300 User manual

IFM Electronic

IFM Electronic Efector 200 Installation guide

IFM Electronic

IFM Electronic Efectorsod PE70 Series User manual

IFM Electronic

IFM Electronic efector 300 SI5004 User manual

IFM Electronic

IFM Electronic efector 250 O2D2 Series Owner's manual

IFM Electronic

IFM Electronic LR3000 User manual

IFM Electronic

IFM Electronic efector 250 User manual

IFM Electronic

IFM Electronic efector 600 OWF User manual

IFM Electronic

IFM Electronic SA 00 Series User manual

IFM Electronic

IFM Electronic efector300 SM8000 User manual

IFM Electronic

IFM Electronic efector100 GG507S User manual

IFM Electronic

IFM Electronic EFECTOR 500 PI26 User manual

IFM Electronic

IFM Electronic VNB001 User manual

IFM Electronic

IFM Electronic Efector 200 OM Series User manual

IFM Electronic

IFM Electronic Efector 200 OI Series User manual

IFM Electronic

IFM Electronic efector150 User manual

IFM Electronic

IFM Electronic LK1022 User manual

IFM Electronic

IFM Electronic efector500 PC3 Series User manual

IFM Electronic

IFM Electronic efector 200 OG laser User manual

IFM Electronic

IFM Electronic efector 300 SU8200 User manual

IFM Electronic

IFM Electronic Efector 200 O6T3 Series User manual

IFM Electronic

IFM Electronic Efector 200 User manual

IFM Electronic

IFM Electronic PY995 Series User manual

IFM Electronic

IFM Electronic PI7093 User manual

Popular Accessories manuals by other brands

Hillco

Hillco 2810 Operator's manual

Siemens

Siemens QSA2700D Basic documentation

Contours

Contours ZY024 manual

Saivod

Saivod VS621 manual

Virtuox

Virtuox VirtuCLEAN 2.0 user manual

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS user manual

Z-Wave

Z-Wave HSD-200Z user manual

turck

turck FMX-IM-2UPLI63FX quick start guide

Decagon Devices

Decagon Devices 10HS manual

UPPAbaby

UPPAbaby Cup Holder user manual

Elko

Elko SmartSensor Leakage Wireless manual

Grizzly

Grizzly H8371 instructions

Panasonic

Panasonic HG-T Series user manual

DigiDesign

DigiDesign 888/24 I/O installation guide

PROZIS

PROZIS QUAY user manual

patagonia

patagonia PSI Vest user manual

SFC Energy

SFC Energy EFOY GO! manual

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit instruction manual

IFM Electronic efector230 UGA User manual

Popular Accessories manuals by other brands