Ideal-Standard E206567 Installation instructions

| 2

| 4

3. SAFETY AND GUIDELINES

ELECTRICAL

•The equipment must be installed by qualiﬁed personnel in compliance with current

standards and with those standards in force relevant to civil electric and hydraulic systems.

The product must be installed in dedicated rooms and must NOT be installed outdoors.

The appliance must be connected correctly to the mains power supply, i.e. to the termi-

nals marked L (line), N (Neutral), otherwise correct operation cannot be assured.

• Precautions

In order to ensure correct installation and maintenance of the product, the manufacturer

recommends careful attention to the instructions contained in this manual. Compliance

with safety norms and the suggestions described in this manual will ensure that the prod-

uct functions perfectly and that the manufacturer’s warranty will be fully applicable.

• Installer

A person who is capable of demonstrating to pertinent authorities that he has the knowl-

edge and skill in the application of national regulatory requirements concerning safety, i.e.

electricity, water supply, and disposal.

•Prior to installation, check that the electrical system is compliant with standards and laws

in eect and that it is equipped with a magneto-thermal dierential switch with an

adequate breaking capacity and a dierential of 30mA. Connection must be made in a ﬁxed

and permanent manner, with no intermediate connections, by installing an adequate

omnipolar disconnecting switch with minimum aperture distance of contacts which allows

complete disconnection in conditions of category III, outside of zones 0-1-2-3. (ﬁg. 1).

•The power cord must be protected inside the wall by a corrugated tube other means

compliant with current standards and certiﬁed as per the EC directive up to the connector

(ﬁg. 2).

• Ensure mains power supply is switched o before commencing.

•This product must only be used with the manufacturers AC/DC adapter or battery

supplied with the product. This product is not intended for use with other types of adapter

or battery.

•Mains powered sensor Bluetooth operated products are only guaranteed fully opera-

tional with a maximum of one metre extension cable length between AC adapter and

Bluetooth module.

| 7

4. KEY FUNCTION AND FEATURES

PRODUCT OVERVIEW

•The smart sensor is designed to detect a dierence between air, water and urine. This

enables it to detect the beginning and ending of every use. It then can determine usage

count and pattern. The installer or maintenance personnel can adjust the ﬂushing volume

of the sensor using a direct override button or with the recorded counter information,

optimise ﬂush count, pattern and water volume via a Bluetooth application.

OVERFLOW PROTECTION

• In case of a blockage before or after the sensor, the urinal will not ﬂush.

MAINTENANCE DETECTION

•The sensor detects low battery power, counts usage and warning of cartridge expiry,

also waste outlet slow ﬂow or blockage.

•All maintenance requirements are communicated via the app and directly on site with

the warning LED in the urinal water spreader.

SPREADER WARNING LED

•The warning LED in the spreader is used to give feedback to maintenance personnel with

dierent ﬂashing patterns.

PASSWORD PROTECTED

• Default password: IS000, can be changed to save settings.

HYBRID MODE

•The sensor will ﬂush the urinal after a set time interval starting from the ﬁrst use. After

every ﬂush the time interval will start with the ﬁrst consecutive usage. Therefore ﬂushing

will only occur if the urinal has been used.

STANDARD MODE

• The sensor will ﬂush the urinal after every use.

WATERLESS MODE

• The sensor will not ﬂush the urinal, but count usage for maintenance of cartridge.

STADIUM MODE

•If the urinal is used more than two times, with less than one minute between uses, the

sensor will go into stadium mode. The urinal still ﬂushes after every use, but with greatly

reduced ﬂush volume. If the urinal is not used for more than one minute, the sensor will

perform a regular maintenance ﬂush. This feature is only available within standard mode

setting.

HYGIENE FLUSH

• Flushes the urinal if it has not been used for a set time period.

FORCED FLUSH

•It is possible for the installer or maintenance personnel to ﬂush the urinal at any time

using the app, the reset button on the sensor or optional override button.

7.1 DEVICES MENU

Device Name

•Selected urinal

Status

•Device Status - Ok / Error

•Ok = Sensor is working

•Error = Sensor or Bluetooth not responding

•Battery Status - Ok / Error

•Ok = Battery is Ok

•Error = Less then 4.5 voltage

•Cartridge Status - Ok / Error

•Ok = Cartridge life is below set usage

•Error = Cartridge life has reached end of set usage

•Flow Detection - Ok / Error / Warning

•Ok = No ﬂow rate issue

•Error = Blocked. No ﬂow rate

•Warning = Slow ﬂow rate

| 10

Other manuals for E206567

This manual suits for next models

Table of contents

Other Ideal-Standard Plumbing Product manuals

Ideal-Standard

Ideal-Standard HYGIENE PLUS Instruction manual

Ideal-Standard

Ideal-Standard W3718AA User manual

Ideal-Standard

Ideal-Standard W3710 User manual

Ideal-Standard

Ideal-Standard SOTTINI TALENT User manual

Ideal-Standard

Ideal-Standard Ceratherm T50 User manual

Ideal-Standard

Ideal-Standard A 2659 NU User manual

Ideal-Standard

Ideal-Standard LINDA-X T4626EN User manual

Ideal-Standard

Ideal-Standard Ceratherm C100 A7537AA User manual

Ideal-Standard

Ideal-Standard CERAMIX A 1100 Series User manual

Ideal-Standard

Ideal-Standard SEPTA PRO U1 User manual

Ideal-Standard

Ideal-Standard ULTRA FLAT NEW T4491 User manual

Ideal-Standard

Ideal-Standard Ceratherm T25 User manual

Ideal-Standard

Ideal-Standard iLife T4875EO Instruction manual

Ideal-Standard

Ideal-Standard IDEALTHERM A 5809 User manual

Ideal-Standard

Ideal-Standard CONNECT 2 DOOR PV Instruction manual

Ideal-Standard

Ideal-Standard ULTRA FLAT S BESPOKE User manual

Ideal-Standard

Ideal-Standard B 6928 AA Use and care manual

Ideal-Standard

Ideal-Standard K7061 Series User manual

Ideal-Standard

Ideal-Standard iLife T4870EO Instruction manual

Ideal-Standard

Ideal-Standard ULTRA FLAT NEW T449001 User manual

Ideal-Standard

Ideal-Standard ALCOVE Instruction manual

Ideal-Standard

Ideal-Standard A 5195 Series User manual

Ideal-Standard

Ideal-Standard PROSYS Comfort R0145 User manual

Ideal-Standard

Ideal-Standard TONIC User manual

Popular Plumbing Product manuals by other brands

Weka

Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS

Kohler

Kohler K-6228 Installation and care guide

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Operator's manual

American Standard

American Standard DetectLink 6072121 manual

Uponor

Uponor Contec TS Mounting instructions

Pfister

Pfister Selia 49-SL Quick installation guide

Fortis

Fortis VITRINA 6068700 quick start guide

Fortis

Fortis MILANO 78211JS installation instructions

Kohler

Kohler K-12183 Homeowner's guide

Maxxus

Maxxus MX-M206-01 instruction manual

Moen

Moen 5922 Series installation instructions

Viega

Viega Prevista Pure 8512 Instructions for use

Kohler

Kohler Centerset K-15240 Homeowner's guide

Viega

Viega Prevista Dry 8522.33 Instructions for use

Sanela

Sanela Lema SLP 59RB Instructions for use

Elkay

Elkay EDF15AC Installation, care & use manual

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions

baliv

baliv WT-140 manual