ICRealtime AVS-D2110 User manual

1 Megapixel HD AVS Camera User’s Manual

Version 1.1.0

Table of Contents

1General Introduction..............................................................................................................1

1.1 Overview ...................................................................................................................1

1.2 Features ....................................................................................................................1

1.3 Functions ..................................................................................................................1

1.4 Specifications ...........................................................................................................1

2Framework .............................................................................................................................3

3Installation ..............................................................................................................................4

4Menu .......................................................................................................................................6

4.1 Menu List ..................................................................................................................6

4.2 Note ...........................................................................................................................7

Appendix Toxic or Hazardous Materials or Elements...............................................................8

Welcome

Thank you for purchasing our HD AVS camera!

This user’s manual is designed to be a reference tool for your system.

Please read the following safeguard and warnings carefully before you use this series product!

Please keep this user’s manual well for future reference!

iii

Important Safeguards and Warnings

1．Electrical safety

All installation and operation here should conform to your local electrical safety codes.

The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited

power source is rated 12V DC in the IEC60950-1.

We assume no liability or responsibility for all the fires or electrical shock caused by improper handling

or installation.

2．Transportation security

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and

installation.

3．Installation

Do not apply power to the camera before completing installation.

Please install the proper power cut-off device during the installation connection.

Always follow the instruction guide the manufacturer recommended.

If this product is installed in the ceiling, please make sure the installation position can sustain the min

50N.

4．Qualified engineers needed

All the examination and repair work should be done by the qualified service engineers.

We are not liable for any problems caused by unauthorized modifications or attempted repair.

5．Environment

This series HD AVS camera should be installed in a cool, dry place away from direct sunlight or strong

light, inflammable, explosive substances and etc.

The working temperature ranges from -30℃to +60℃. Please keep it away from the electromagnetic

radiation object and environment.

Please make sure the CMOS component is out of the radiation of the laser beam device. Otherwise it

may result in CMOS optical component damage.

Please keep the sound ventilation.

Do not allow the water and other liquid falling into the camera.

6. Accessories

Be sure to use all the accessories recommended by manufacturer.

Before installation, please open the package and check all the components are included.

Contact your local retailer ASAP if something is broken in your package.

7. Daily Maintenance

Please shut down the device and then unplug the power cable before you begin daily maintenance

work.

Use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the

mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the device.

Please put the dustproof cap to protect the CMOS component when you do not use the camera.

1General Introduction

1.1 Overview

This series megapixel HD camera conforms to the HD AVS standard. It supports video signal

high-speed long distance transmission without any delay. It can be controlled by the DVR

conforming to the HD AVS.

1.2 Features

High-performance CMOS image sensor, megapixel definition.

HD video, coaxial cable to transmit the control signal.

Support 75-3 coaxial cable transmission without any loss. Transmission distance is over

500m.

Support HD and standard definition switch.

Support 720P@25, 720P@30, 720P@50, 720P@60.

High speed, long distance real-time transmission.

Support OSD (on-screen display), suitable for user self-defined setup.

Support DC12V power supplying.

Support 3D noise reduction(denoise),excellent performance in low illumination

environment.

IP66 compliance.

Support ICR switch to realize surveillance both in the daytime and at night.

Support intelligent IR function.

1.3 Functions

HD AVS Specification

HD AVS is an over-coaxial –cable HD video transmission standard. The technology renders

two HD video formats by progressive scanning.

OSD

User-friendly on-screen display for you to select the different functions.

ICR

The IR cut removal is to filter the IR light in the daytime and then auto switch to the general

fitter at night. This function allows the camera to output the high sensitivity and clear video.

Smart IR technology

The sensor controls the IR light on/off via the combination work of the hardware and software,

which realizes the automatically IR light compensation according to the environment

illumination.

1.4 Specifications

Please refer to the following sheet for specification.

Model

Parameter

1 Megapixel HD AVS Camera

AVS-D2110

Video Processor

1/3" 1.3 Megapixel CMOS

Video Format

PAL/NTSC

Effective Pixel

1280(H)×960(V)

Min Illumination

0.01Lux@（F1.2，AGC ON），0 Lux with IR

Electronic Shutter

4/30~1/54,000s

Video Standard

HD AVS/CVBS compliance

Video Frame Rate

1280×720@25 fps；1280×720@30 fps；

1280×720@50 fps；1280×720@60 fps

Lens Port

M12

Lens Type

3.6mm

Day/Night Switch

ICR mechanical auto switch

Video Output

1-channel BNC HD AVS high definition video output/ CVBS standard definition

video output (Can switch.)

Denoise (Noise

Reduction)

Support 3D denoise.

OSD Menu Control

Support

OSD

EXPOSURE

Global/centre/Centre weight/BLC/Front light/Distinguish

WHITE

BALANCE

AWB-GW/AWB-CCT/AWB-PRO/AWB-TEMPROAL/AWB-AI/AWB-SZ

DAY/NIGHT

Auto/B&W/Color

FUNCTION

3DNR

ADVANCED

Mirror/Language/RS485/Video format/Version/

IMAGE

Sharpness/Contrastness/Saturation/Brightness

EXIT

SAVE/CANCEL/RESET

Max IR Distance

20m

Transmission

Distance

Over 500m via 75-3 coaxial cable.

Protection Level

IP66

Working Temperature

/Humidity

-30℃~+60℃. Humidity is less than 95%(no condensation)

Power

DC 12V±10%

Power Consumption

3.5W MAX (Input: 12V 0.29A)

Dimension(mm)

Φ113.6×85.4

Weight

300g

Installation Mode

Wall mount

In-ceiling mount

2Framework

Please refer to the following figures for the dimension information. The unit is mm. See Figure

2-1.

Figure 2-1

When the standard definition/high definition switch control cable is short circuit, system outputs

standard definition video. Otherwise, when the circuit is open, system outputs the high

definition video.

3Installation

Important

Before the installation, please make sure the installation surface can sustain at

least 3X weight of the bracket and the camera.

Step1

Please take the installation position map in the accessories bag, and then paste it on the

ceiling or the wall according to your monitor area requirements. Draw and then dig three holes

in the installation surface and then insert three expansion bolts in the holes. Secure these

three bolts firmly.

Step 2

Turn counter clockwise to remove the decoration ring. Please dig a “cable exit hole”in the

surface according to the installation position map if you want to draw out the cable from the top

of the installation surface. You need to draw out the cable from the cable channel side port of

the pedestal if you want to draw out the cable from the side port of the cable channel. Adjust

the device installation pedestal to the proper position and then draw the cable through the

cable exit. Line up the three screw holes in the device pedestal to the three plastic expansion

bolt holes in the installation position. Put the three self-tapping screws in the three plastic

expansion bolts firmly. Now the dome camera is secure in the installation surface. See Figure

3-1.

Figure 3-1

Step 3

Adjust the lens to get the clear monitor video. See Figure 3-2. Use crosshead screwdriver to

loosen the screw and the turn the camera body to the proper position manually. Fix the screw

again.

Important

Do not remove the screw. Loosen a little bit will be OK. Please secure after you completed the

setup.

Figure 3-2

Step 4

Line up the bulge of the decoration ring to the nick of the camera body and install along the tilt

installation. Push and then turn decoration ring clockwise. The installation completed after you

secure the decoration ring. You need to use the proper tool to open up the side port of the U-

cable channel of the decoration ring if you want to draw out the cable from the side port of the

cable channel when you are installing the device cable. And then you can draw out the cable

from the cable channel of the pedestal. Finally you can install the decoration ring to complete

the installation. See Figure 3-3.

Figure 3-3

Table of contents

Other ICRealtime Security Camera manuals

ICRealtime

ICRealtime IPFX-S20F-W1 User manual

ICRealtime

ICRealtime ICIP-D2000VIR-B User manual

ICRealtime

ICRealtime AVS-B2712SL User manual

ICRealtime

ICRealtime ICIP-D3077P User manual

ICRealtime

ICRealtime AVS-B2218Z User manual

ICRealtime

ICRealtime PTZ-3660SIR User manual

ICRealtime

ICRealtime ICIP360L6 User manual

ICRealtime

ICRealtime Elite IPEL-E80F-IRB2 User manual

ICRealtime

ICRealtime ICHD850VDIR User manual

ICRealtime

ICRealtime ICIPD4002IR28 User manual

ICRealtime

ICRealtime ICHD-2000P20X Original operating instructions

ICRealtime

ICRealtime F Series User manual

ICRealtime

ICRealtime ICR540CCD User manual

ICRealtime

ICRealtime EL9036 User manual

ICRealtime

ICRealtime ELIP-3000N User manual

ICRealtime

ICRealtime AVS-4MB4016-IR User manual

ICRealtime

ICRealtime AVS Series User manual

ICRealtime

ICRealtime Full HD(HD-SDI) CCTV Box Camera User manual

ICRealtime

ICRealtime ICR2200 User manual

ICRealtime

ICRealtime ICIP-P2300Y-IR User manual

ICRealtime

ICRealtime AVS-4KD8021-IR User manual

ICRealtime

ICRealtime F Series User manual

ICRealtime

ICRealtime ClearView WiFi-2MP-BL100 User manual

ICRealtime

ICRealtime EL-3000N User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications