ICRealtime F Series User manual

HD IR Waterproof Fixed Network Camera User’s Manual

Version 4.0.2

Welcome

Thank you for purchasing our network camera!

This user’s manual is designed to be a reference tool for your system.

Please read the following safeguard and warnings carefully before you use this series product!

Please keep this user’s manual well for future reference!

Important Safeguards and Warnings

1．Electrical safety

All installation and operation here should conform to your local electrical safety codes.

The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited

power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction) Please

note: Do not connect two power supplying sources to the device at the same time; it may result

in device damage!

We assume no liability or responsibility for all the fires or electrical shock caused by improper handling

or installation.

We are not liable for any problems caused by unauthorized modification or attempted repair.

2．Transportation security

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and

installation.

3．Installation

Do not apply power to the camera before completing installation.

Please install the proper power cut-off device during the installation connection.

Always follow the instruction guide the manufacturer recommended.

4．Qualified engineers needed

All the examination and repair work should be done by the qualified service engineers.

We are not liable for any problems caused by unauthorized modifications or attempted repair.

5．Environment

This series network camera should be installed in a cool, dry place away from direct sunlight,

inflammable, explosive substances and etc.

Please keep it away from the electromagnetic radiation object and environment.

Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.

Otherwise it may result in CCD (CMOS) optical component damage.

Please keep the sound ventilation.

Do not allow the water and other liquid falling into the camera.

Thunder-proof device is recommended to be adopted to better prevent thunder.

The grounding studs of the product are recommended to be grounded to further enhance the reliability

of the camera.

6. Daily Maintenance

Please shut down the device and then unplug the power cable before you begin daily maintenance

work.

iii

Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens

surface.

Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to

dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the

device.

Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera.

Dome enclosure is the optical component, do not touch the enclosure when you are installing the

device or clean the enclosure when you are doing maintenance work. Please use professional optical

clean method to clean the enclosure. Improper enclosure clean method (such as use cloth) may result

in poor IR effect of camera with IR function.

7. Accessories

Be sure to use all the accessories recommended by manufacturer.

Before installation, please open the package and check all the components are included.

Contact your local retailer ASAP if something is broken in your package.

Accessory Name

Amount

Network Camera Unit

Quick Start Guide

Table of Contents

1General Introduction ..................................................................................................................1

1.1 Overview........................................................................................................................1

1.2 Features.........................................................................................................................1

1.3 Specifications................................................................................................................2

1.3.1 Performance...........................................................................................................2

2Structure ......................................................................................................................................4

2.1 Multiple-function Combination Cable ........................................................................4

2.2 Framework and Dimension.........................................................................................5

2.3 Bidirectional talk............................................................................................................6

2.3.1 Device-end to PC-end..........................................................................................6

2.3.2 PC-end to the Device-end....................................................................................6

2.4 Alarm Setup...................................................................................................................6

3Device Installation ......................................................................................................................9

4Quick Configuration Tool.........................................................................................................10

4.1 Overview......................................................................................................................10

4.2 Operation.....................................................................................................................10

5Web Operation..........................................................................................................................12

5.1 Network Connection...................................................................................................12

5.2 Login and Main Interface...........................................................................................12

6FAQ ............................................................................................................................................15

Appendix Toxic or Hazardous Materials or Elements ...............................................................16

1General Introduction

1.1 Overview

This series network camera integrates the traditional camera and network video technology. It adopts

audio and video data collection, transmission together. It can connect to the network directly without

any auxiliary device.

This series network camera uses standard H.264 video compression technology and G.711a audio

compression technology, which maximally guarantee the audio and video quality.

It supports the IR night vision function. In the night environments, the device can use the IR light to

highlight the object which is suitable for the surveillance function in the low illumination environments.

The built-in protection enclosure and waterproof design conforms to the IP 66 level. It has the sound

waterproof function suitable for use in the outdoor environments.

It supports real-time monitor and listening at the same time. It supports analog video output and dual-

way bidirectional talk.

It can be used alone or used in a network area. When it is used lonely, you can connect it to the

network and then use a network client-end. Due to its multiple functions and various uses, this series

network camera is widely used in many environments such office, bank, road monitor and etc.

1.2 Features

User

Management

Different user rights for each group, one user belongs to one group.

The user right shall not exceed the group right.

Storage

Function

Support central server backup function in accordance with your configuration

and setup in alarm or schedule setting

Support record via Web and the recorded file are storage in the client-end

PC.

Support built-in SD card.

Do not support local SD card hot swap storage function. Support short-time

storage when encounter disconnection.

Support network storage function such as FTP.

Alarm

Function

Real-time respond to external on-off alarm input, and video detect as user

pre-defined activation setup and generate corresponding message in screen

and audio prompt(allow user to pre-record audio file)

Real-time video detect: motion detect, tampering.

Network

Monitor

Network camera supports one-channel audio/video data transmit to network

terminal and then decode. Delay is within 270ms (network bandwidth support

needed)

Max supports 20 connections.

Adopt the following audio and video transmission protocol: HTTP, TCP, UDP,

MULTICAST, RTP/RTCP, RTSP and etc.

Support web access.

Network

Management

Realize network camera configuration and management via Ethernet.

Support device management via web or client-end.

Power

External power adapter DC12V/AC 24V. You can select according to your

actual environments. Please note system can not support these two types of

power supplying at the same time.

Assistant

Function

Log function

Support system resource information and running status real-time display.

Day/Night mode auto switch.

Built-in IR light. Support IR night vision.

Support picture parameter setup such as electronic shutter and gain setup.

Backlight compensation: screen auto split to realize backlight compensation

to adjust the bright.

Support video watermark function to avoid vicious video modification.

The enclosure conforms to the IP 66 protection. Has the waterproof function.

1.3 Specifications

1.3.1 Performance

Please refer to the following sheet for network camera performance specification.

Model

Parameter

ICIP S3000AF

System

Main Processor

TI Davinci high performance DSP

Embedded LINUX

System

Resources

Support real-time network, local record, and remote operation at the

same time.

User Interface

Remote operation interface such as WEB, DSS, PSS

System Status

SD card status, bit stream statistics, log, and software version.

Video Parameter

Image Sensor

1/2.8-inch CMOS

Pixel

2048(H)*1536(V)

Day/Night Mode

Support day/night mode switch and IR-CUT at the same time.

Auto Aperture

DC drive

Gain Control

Fixed/Auto

White Balance

Manual/Auto

BLC

Off/BLC/WDR (1-100)/HLC(anti-flicker is outdoor and is valid only when

exposure mode is auto with range 1-100)

Exposure Mode

Auto/Low noise/Low motion blur/ Manual

It ranges from 1/3 to 1/10000

Video

Compression

Standard

H.264/H.264H/H.264B/MJPEG

Note: Some versions do not support H.264H.

Video Frame

Rate

PAL:

Main stream (2048*1536@18fps), extra stream (704*576@18fps)

Main stream (1920*1080@25fps), extra stream (704*576@25fps)

NTSC:

Main stream (2048*1536@20fps), extra stream (704*480@20fps)

Main stream (1920*1080@30fps), extra stream(704*480@30fps)

Video Bit Rate

H.264: 56Kbps-8192Kbps

MJPEG: adjustable and bit rate is adjustable.

Support customized setup.

Video Flip

Support mirror and flip function.

Snapshot

Max 1f/s snapshot. File extension name is JPEG.

Privacy Mask

Supports max 4 privacy mask zones

Video Setup

Support parameter setup such as bright, contrast.

Video

Information

Channel title, time title, motion detect, tampering.

Lens

8~16mm @F1.6

Lens Interface

C/CS. Lens is the default accessories

Audio

Audio Input

1-channel,LINE IN

Audio Output

1-channel, 3.5mm JACK SPEAK OUT.

Bidirectional

Talk Input

Reuse the first audio input channel

Audio Bit Rate

16kbps 16BIT

Audio

Compression

Standard

G.711A/G.711Mu

Video

Motion Detect

396 (18*22) detection zones; sensitivity level ranges from 0 to 100;

area threshold ranges from 0 to 100.

Activation event: video storage, image snapshot, log, email function

and etc.

Alarm Input

2-channel input,1-channel output

Record

and

Backup

Record Priority

Manual>External alarm >Video detect>Schedule

Storage

Management

Support SD card storage, NAS storage

Network

Wire Network

1-channel wire Ethernet port, 10/100 Base-T Ethernet

Network Protocol

HTTP,TCP,ARP,RTSP,RTP,UDP,RTCP,SMTP,FTP,DHCP,DNS,DDN

S,PPPOE,IPv4/v6,SNMP,QoS,UPnP,NTP, HTTPS, 802.1x, Bonjour

Protocol

PSIA (optional), ONVIF

Remote

Operation

Monitor, system setup, file download, log information, maintenance ,

upgrade and etc

AUX

Interfac

Video Output

1-channel analog video output,BNC port, 9-pin port connection

Reset

9-pin port connection

IR light

42 LED, IR distance 20 to 30 meters.

70 LED, IR distance 30 to 50 meters.

General Parameter

Power

Support AC24V/DC12V power.

Power

Consumption

For –IR2 device: 8W MAX (10W MAX when ICR switch)

Working

Temperature

-20℃~+60℃

Working

Humidify

≤95%

Dimensions(mm)

288×118×101

Weight

2468g(Excluding box)

Installation

Support various installation modes (Bracket is optional)

2Structure

2.1 Multiple-function Combination Cable

You can refer to the following figure for multiple-function combination cable information. See Figure

2-1.

Figure 2-1 Multiple-function combination cable

Please refer to the following sheet for detailed information.

Port Name

Function

Connection

Note

VIDEO OUT

Video output

port

BNC

Output analog video signal. It can connect

to the TV monitor to view the video.

AUDIO IN

Audio input

port

RCA

Input audio signal. It can receive the

analog audio signal from the pickup.

AUDIO OUT

Audio output

port

RCA

Output audio signal to the devices such as

the sound box.

LAN

Network port

Ethernet

port

Connect to standard Ethernet cable.

Support PoE.

I/O

I/O cable

port

Includes alarm input and output.

RESET

Reset button

The reset button is to restore device factory

default setup.

Port Name

Function

Connection

Note

POWER

Power input

port

Power port. Input DC 12V or AC 24V.

Default is a DC 5.5 round port to 2-pin

converter cable

Please note：

Connect the DC5.5 round port to 2-pin

converter cable (Provided) when you are

using AC 24V series product.

Please refer to the follow sheet for detailed pin information

Port Name

Name

Note

I/O Port

ALARM_COM

Alarm output public port.

ALARM_NO

Alarm output port. It is to output the alarm signal

to the alarm device.

NO: normal open alarm output port.

ALARM_IN1

Alarm input port 1. It is to receive the on-off signal

from the external alarm source.

ALARM_IN2

Alarm input port 2. It is to receive the on-off signal

from the external alarm source.

GND

Ground port

2.2 Framework and Dimension

Please refer to the following two figures for dimension information. The unit is mm. See Figure 2-2 and

Figure 2-3.

Figure 2-2 Dimension illustration 1

Other manuals for F Series

Table of contents

Other ICRealtime Security Camera manuals

ICRealtime

ICRealtime EL-2000 I-sniper User manual

ICRealtime

ICRealtime ClearView WiFi-2MP-BL100 User manual

ICRealtime

ICRealtime F Series User manual

ICRealtime

ICRealtime AVS Series User manual

ICRealtime

ICRealtime Full HD(HD-SDI) CCTV Box Camera User manual

ICRealtime

ICRealtime AVS-D2118VF User manual

ICRealtime

ICRealtime AVS-A4112S User manual

ICRealtime

ICRealtime AVS-4MD4025-IR User manual

ICRealtime

ICRealtime AVS-4MB4012-IR User manual

ICRealtime

ICRealtime F Series User manual

ICRealtime

ICRealtime ICR-100X User manual

ICRealtime

ICRealtime ICR540IN User manual

ICRealtime

ICRealtime ICR2200 User manual

ICRealtime

ICRealtime ICHD-2000P20X Original operating instructions

ICRealtime

ICRealtime IPFX-S20F-W1 User manual

ICRealtime

ICRealtime HD-AVS User manual

ICRealtime

ICRealtime AVS-Z4212T User manual

ICRealtime

ICRealtime AVS-B2100 User manual

ICRealtime

ICRealtime F Series User manual

ICRealtime

ICRealtime ICIP D2010IR User manual

ICRealtime

ICRealtime ICR300H3W User manual

ICRealtime

ICRealtime AVS-4KD8021-IR User manual

ICRealtime

ICRealtime ICIP-D2360 User manual

ICRealtime

ICRealtime Elite User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications