ICP DAS USA I-7188XBD-CAN User manual

I-7188XBD-CAN I-7188 CAN bus series PAC - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

1

I-7188XBD-CAN

I-7188 CAN bus series Programmable Automation

Controller

Quick Start Guide

Product Website:

http://www.icpdas-usa.com/i_7188xbd_can.html

1. Introduction

The I-7188XBD-CAN series PACs (Programmable Automation Controller) are powered

by 80188-40 processor with 512K bytes of static RAM, and 512K bytes of Flash

memory. All of them provide several communication interfaces to adapt to various

applications, such as CAN port, RS-232 port and RS-485 port. Uses can program their

application program flexibly with C/C++ language because of the built-in MiniOS7

operation system. Besides, the I-7188XBD-CAN series PACs have different I/O types

for users to match their requirement. For I-7188XBD-CAN, it provides 1 open collector

digital output channel and 1 digital input channel. It is useful for transfer the command

from differential communication interface. Therefore, it can satisfy the applications with

I/O demand. Therefore, the I-7188XBD-CAN series PACs are economic and convenient

solution for diversification CAN application.

I-7188XBD-CAN I-7188 CAN bus series PAC - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

2

2. Terminal Resistor Jumper Selection

Remove the cover of the I-7188XBD-CAN/μPAC-7186EXD-CAN. Users can see the

part of internal structure shown as following figure. The XC100 provides users one

jumper-selected termination resistor (J3). Its position is displayed below.

The jumper J3 is used to judge the resister of CAN network. When users want to set the

jumper JP3, the upper cover of I-7188XBD-CAN/ μPAC-7186EXD-CAN needs to be

removed. About the J3 jumper setting, please refer the following figure

I-7188XBD-CAN I-7188 CAN bus series PAC - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

3

3 . Wiring Diagram For Different Application

If users want to download users’ program, the following structure may be needed. Users

must use the download cable (packaged with I-7188XBD-CAN) to connect the I-

7188XBD-CAN COM1 with PC available COM port. Then, use the tool, 7188xw.exe, in

OSImage folder to download users’ program. Please refer section 4 of user manual for

more detail information.

The following figure shows the wiring diagram for general application. When the COM1

of I-7188XBD-CAN is used, sending data to COM1 will transmit the data both on RS-

232 and RS-485 port. One of the RS-232 and RS-485 port receives the data, these data

will be obtained by COM1 of the I-7188XBD-CAN. Therefore, it is not recommend using

both RS-232 and RS-485 functions of COM1 at the same time. If users select the RS-

232 function of COM1, the RTS1 and CTS1 pins are not always necessary. It is need to

check if the connection target machine uses 3-line RS-232 communication or 5-line RS-

232 communication.

I-7188XBD-CAN I-7188 CAN bus series PAC - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

4

Moreover, in order to wire conveniently, the I-7188XBD-CAN provides not only one CAN port, but also

another bypass CAN port. There two CAN ports are the same one. The bypass CAN port is just for wiring

with another CAN device conveniently, it doesn’t have any other function.

The general wire connection methods for DI channel of I-7188XBD-CAN are shown below.

This manual suits for next models

1

Table of contents

Other ICP DAS USA Controllers manuals

ICP DAS USA

ICP DAS USA ALM-04-MRTU User manual

ICP DAS USA

ICP DAS USA WISE-52 Series User manual

ICP DAS USA

ICP DAS USA TPD-280-H User manual

ICP DAS USA

ICP DAS USA ISaGRAF I-8437-80 User manual

ICP DAS USA

ICP DAS USA ALM-06-WF User manual

ICP DAS USA

ICP DAS USA TPD-433F User manual

ICP DAS USA

ICP DAS USA WISE-75 M Series User manual

ICP DAS USA

ICP DAS USA TPD-283U-H User manual

ICP DAS USA

ICP DAS USA MP-8 43 Series User manual

ICP DAS USA

ICP DAS USA VPD Series User manual

ICP DAS USA

ICP DAS USA WISE-5801 User guide

ICP DAS USA

ICP DAS USA WISE-52 Series User manual

ICP DAS USA

ICP DAS USA WP-8000-CE7 Series User manual

ICP DAS USA

ICP DAS USA WISE-52 Series User manual

ICP DAS USA

ICP DAS USA 7188XA Instructions for use

ICP DAS USA

ICP DAS USA ET-M8194H Instruction manual

ICP DAS USA

ICP DAS USA I-8091 User manual

ICP DAS USA

ICP DAS USA I-8411 User manual

ICP DAS USA

ICP DAS USA GRP-2841M-5GE User manual

ICP DAS USA

ICP DAS USA CAN-8123 Setup guide

ICP DAS USA

ICP DAS USA NMC-9181 Installation guide

ICP DAS USA

ICP DAS USA WP-2000-CE7 Series User manual

ICP DAS USA

ICP DAS USA WISE-224 Series User manual

ICP DAS USA

ICP DAS USA WISE-52 Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual