ICP DAS USA USB-87P1 User manual

p. 1

USB-87P1/2/4/8 Quick Start 1.02

ICP DAS, Co., LTD www.icpdas.com

Package Checklist

Items

Quantity

Model No.

Description

USB-87Pn

USB-87P1

Hardware module:

USB-87Pn I/O Unit

P1: 1 Slot P2: 2 Slots

P4: 4 Slots P8: 8 Slots

USB-87P2

USB-87P4

USB-87P8

Cable

CA-USB18

USB connector cable

Manual

Quick Start Manual (this manual)

Software utility, USB-87Pn User

Manual

Screw

Driver

2.4 mm Screw driver (minus

style)

NOTE: USB-87Pn is only for High Profile I-87K I/O modules,

please DO NOT use Low Profile I/O modules. For more

information, please refer to Chapter 2.2.5 & Appendix B of

“USB-87P1/2/4/8 User Manual”.

Preparation

Power Supply: +10V ~ +30V /DC (Ex: DP-665)

http://www.icpdas.com/products/Accessories/power_supply/power_list.htm

Install USB-87Pn DriverInstaller to PC:

at CD:\NAPDOS\87pn_io_unit\USB-87Pn

or ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/87pn_io_unit/USB-87Pn/

Install DCON Utility to PC:

(Version 4.5.2 or above version. Please remove the old version

before install the new version) at CD:\ Napdos\Driver\DCON_Utility

or ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/

Original Writer : Eva Li

Last Editor : Hans , 05/27/2015

All manuals and user guides at all-guides.com

all-guides.com

p. 2

Hardware Configuration

1. View of the USB-87Pn

Slot 0

Power Module

CPU Module

High Profile I-87K I/O Slots

87Pn Power

Power

Connector

Slots LED

indicators

CPU Power

System Ready

Auto Configuration Indicator

Auto Configuring

Dip Switch

Enable/Disable

Slot 1

Slot 2

Slot 3

USB Port

Power & CPU

Module

High Profile I-87K I/O

Slots

Power Connector

Auto Configuring

Dip Switch

Enable/Disable

USB Port

Slots LED Indicators

Power

System Ready

Auto Configuration

Indicator

Slot 0

Slot 1

USB-87P4

USB-87P8 is

like USB-87P4,

but with 8 slots.

USB-87P2

USB-87P1 is

like USB-87P2,

but with 1 slot.

All manuals and user guides at all-guides.com

p. 3

2. Wire the 87Pn to Power and PC

3. Configure CPU Module

Switch

Label

Setting

Description

Dip

Switch

Auto

Config.

Enable

(Switch to ON)

OFF

Disable

USB Connector Cable

(CA-USB18)

PC (COM X)

USB-87P4

Power Supply

+10~+30 VDC

GND

+Vs

GND

To USB port

All manuals and user guides at all-guides.com

p. 4

4. Plug in the High Profile I/O Modules

Example: Plug in I-87019R to Slot 0.

p.s. I-87019R is an AI (Analog Input) High Profile module

I-87019R is auto-configured:

Baud Rate: 115200

Checksum: Disable

Net Address: 2

Note: The Net Address of

USB-87PN is always 1.

After plugged in, the slot indicator is

flashing per 100 ms.

When software configuration is

completed, the LED becomes off.

If configuration is failed, the LED is

always on.

High

Profile

66.7

87.46

102.14

81.08

Low

Profile

Slot: 0 1 2 3





Net Address: 12345

All manuals and user guides at all-guides.com

p. 5

Software Configuration

1. Run DCON Utility to Search the USB-87Pn (Ex: USB-87P8)

Note: Please finish the “Preparation”(See P.1) before Software

Configuration.

The old version of USB-87Pn with old USB chip, it needs to install old

USB driver, and Device Manager will show as below:

Check “Device

Manager”of your

PC to see the

connecting COM.

All manuals and user guides at all-guides.com

p. 6

2. Click “USB-87Pn”to Setup Slots

3. Configure the 87K I/O Module

If the status code is not [01H],

click button and follow

the instruction please.

All manuals and user guides at all-guides.com

all-guides.com

p. 7

4. Click “Write To 87Pn” Button

5. Click “Start Search”Button

Note:

For changing the configuration of 87K I/O module, please repeat from

the STEP 2of the Software Configuration.

“[0,0,0,0...]” of “Status”means “The I/O configuration of each slot is correct”. Each

plugged I/O module will be listed under the USB-87Pn. User can click the name of

I/O module to watch its configuration.

After “Write To 87Pn”, the Status Code

is changed to “[00H] OK”that means

“The configuration is correct”.

All manuals and user guides at all-guides.com

p. 8

Change the Hardware I/O Module

Doesn’t need to configure I/O module again!

Easy! Convenient!

Technical Support

1. USB-87P1/2/4/8 User Manual

CD:\NAPDOS\87Pn_io_unit\USB-87Pn or

ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/87pn_io_unit/usb-87pn/

2. DCON Utility User Manual

CD:\ Napdos\Driver\DCON_Utility\Manual or

ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/manual/

3. I-87K high profile series I/O modules selection guide

http://www.icpdas.com/products/PAC/i-8000/8000_IO_modules.htm

4. Our service email account : service@icpdas.com

5. Our website : www.icpdas.com

Remove the

damaged

module.

Plug in a new one with

the same model number.

All manuals and user guides at all-guides.com

Other manuals for USB-87P1

This manual suits for next models

Table of contents

Other ICP DAS USA Control Unit manuals

ICP DAS USA

ICP DAS USA EIP-2000 Series Installation guide

ICP DAS USA

ICP DAS USA PET-7261 User manual

ICP DAS USA

ICP DAS USA M-7051D User manual

ICP DAS USA

ICP DAS USA SG-3071 User manual

ICP DAS USA

ICP DAS USA M-7019Z User manual

ICP DAS USA

ICP DAS USA PROFIBUS PROFI-2510 User manual

ICP DAS USA

ICP DAS USA PM-4324 Series User manual

ICP DAS USA

ICP DAS USA I-7014D User manual

ICP DAS USA

ICP DAS USA M-7069 User manual

ICP DAS USA

ICP DAS USA WF-2017 User manual

ICP DAS USA

ICP DAS USA I-7016 User manual

ICP DAS USA

ICP DAS USA I-7083 User manual

ICP DAS USA

ICP DAS USA tM-AD4P2C2 User manual

ICP DAS USA

ICP DAS USA tM-AD8C User manual

ICP DAS USA

ICP DAS USA MDC-714i User manual

ICP DAS USA

ICP DAS USA M-7033D User manual

ICP DAS USA

ICP DAS USA HRT-370 User manual

ICP DAS USA

ICP DAS USA ECAT-2061 User manual

ICP DAS USA

ICP DAS USA I-7052D User manual

ICP DAS USA

ICP DAS USA GW-7552-M User manual

ICP DAS USA

ICP DAS USA M-7026 User manual

ICP DAS USA

ICP DAS USA tM-P3R3 User manual

ICP DAS USA

ICP DAS USA ZT-2055 User manual

ICP DAS USA

ICP DAS USA I-7045D User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual