ICP DAS USA EIP-2000 Series User manual

EIP-2051 Quick Start Guide

EIP-2051

Screw Driver

EIP-2051 Quick Start Guide

The package includes the following items:

Install EIP-2000 Utility:

The software is located at:

Fieldbus_CD:\EtherNetIP\remote-io\EIP-2051\Utility

Quick Start Guide

(This Document)

For EIP-2000 Series

English/ February 2013/ Version 1.0

What’s in the shipping package?

Installing software on your PC

EIP-2051 Quick Start Guide

1. Make sure your PC has workable network settings.

2. Disable or well configure your Windows firewall and anti-virus firewall first, else the

“Network Scan”on step 4 may not work. (Please contact with your system Administrator)

3. Check FW/OP DIP switch if it is on OP position.

4. Connect both the EIP-2000 and your computer to the same sub network or the same

Ethernet switch, and power the EIP-2000 on.

Connecting the Power and PC

EIP-2051 Quick Start Guide

5. I/O connector –EIP-2051

6. I/O Wire Connection

20-pin Spring-type terminal connecter

Description

DI.COM

DI7

DI15

DI6

DI14

DI5

DI13

DI4

DI12

DI3

DI11

DI2

DI10

DI1

DI9

DI0

DI8

Dry.GND

EIP-2051 Quick Start Guide

1. Double click the “EIP-2000 Utility”shortcut on the desktop.

2. Click the “Network Scan” button to search your EIP-2000 modules.

3. Click the EIP-2051 or other EIP-2000 modules on the device list below to open the

configuration dialog of EIP-2000. Each EIP-2000 module has its own configuration

interface.

4. You can observe the DI status with the green circles which is showed on the Digital Input

field.

Using the EIP-2000 Utility

EIP-2051 Quick Start Guide

5. If the network settings have been changed, please click the “Update Network Settings”

button to update the configuration and reboot the module.

6. Configuration settings of EIP-2000

Network Settings

Item

Settings (default)

192.168.255.1

Gateway

192.168.0.1

Mask

255.255.0.0

For configuration of the Address Type, Static IP Address, Subnet Mask and Default Gateway of the EIP-2000.

Please refer to section “4.2.1 Network Settings”

LED Indicator

LED

LED Status

Description

Power LED

Always On

Module is in Run mode.

Flashing

Module is in Init mode.

Status LED

Always On

EtherNet/IP connection is failed.

Blink per second

EtherNet/IP connection is successful.

Blink per 300 ms

EtherNet/IP disconnected during communication but still in Safe-Delay time.

Blink per 100 ms

Module is about to reboot.

I/O status LED

The DI is activated.

Off

The DI is inactivated.

For configuration of the Power On Value, Safe Value, Safe Delay for the EIP-2000. Please refer to section “4.2.2

Digital Settings”

EIP-2051 Quick Start Guide

1. Open RSLogix 5000 and create a new project.

Figure5-1. Create a new project.

2. Select the PLC type and give the project a name.

Figure5-2. Set the PLC type and project name.

How to connect with Allen-Bradley PLC？

EIP-2051 Quick Start Guide

3. Create a new module in the “Ethernet”item.

Figure 5-3. Create a new module.

4. Select the “ETHERNET-MODULE”below “Communications”in the Select Module

window.

Figure5-4. Select “ETHERNET-MODULE”.

EIP-2051 Quick Start Guide

5. Configure the new module parameters. The I/O length of new module must be the same with

the length of EIP-2051 I/O data(Table 5-1). The input data size is 66 bytes and output data

size is 2 bytes. The instance ID please refer to Table 5-2.

Figure5-5. The settings of EIP-2051 module

Table 5-1. Data Assembly of EIP-2051

Data

Assembly

Byte count

Description

Input

Assembly

1st Byte: DI status(DI0~DI7).

2nd Byte: DI status(DI8~DI15).

3rd~65th Byte: DI counters.

Output

Assembly

1st Byte: to set DI counters zero (DI0~DI7).

2nd Byte: to set DI counters zero (DI8~DI15).

Table 5-2. Instance ID table of EIP-2000

Implicit Message Information of EIP-2000

Instance

Instance ID

Data length

Input(T->O)

65hex(101)

Depends on modules. e.g.66

Out(O->T)

66hex(102)

Depends on modules. e.g.2

Configuration

64hex(100)

Other manuals for EIP-2000 Series

This manual suits for next models

Table of contents

Other ICP DAS USA Control Unit manuals

ICP DAS USA

ICP DAS USA PM-3133-RCT Series User manual

ICP DAS USA

ICP DAS USA PISO-CPM100U-D/T User manual

ICP DAS USA

ICP DAS USA I-7080 User manual

ICP DAS USA

ICP DAS USA SP-S2-DS User manual

ICP DAS USA

ICP DAS USA I-7063 User manual

ICP DAS USA

ICP DAS USA tM Series User manual

ICP DAS USA

ICP DAS USA SG-785 User manual

ICP DAS USA

ICP DAS USA PROFIBUS PROFI-2510 User manual

ICP DAS USA

ICP DAS USA 7188EN Installation guide

ICP DAS USA

ICP DAS USA ET-7083 User manual

ICP DAS USA

ICP DAS USA tSH-725 User manual

ICP DAS USA

ICP DAS USA I-7083 User manual

ICP DAS USA

ICP DAS USA tM-AD5 User manual

ICP DAS USA

ICP DAS USA ET-7065 User manual

ICP DAS USA

ICP DAS USA I-2533 User manual

ICP DAS USA

ICP DAS USA PDS-5000 Series User manual

ICP DAS USA

ICP DAS USA tET Series User manual

ICP DAS USA

ICP DAS USA I-7014D User manual

ICP DAS USA

ICP DAS USA M-7064 User manual

ICP DAS USA

ICP DAS USA DS-2200 Series User manual

ICP DAS USA

ICP DAS USA M-7016 User manual

ICP DAS USA

ICP DAS USA SG-3784M User manual

ICP DAS USA

ICP DAS USA I-8092F Parts list manual

ICP DAS USA

ICP DAS USA ET-2260 User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual