IBM LB20 User manual

Basic Purpose Printer

LB20

User’s Guide

Part number: EK-LB20A-UG.001

ACKNOWLEDGMENT

IBM, PC, XT, AT, PS/2, Proprinter and 4722 are

registered trademarks of International Business

Machines Corporation

MS-DOS, Windows 3.1x, Windows 95 and

WindowsNT are trademarks of Microsoft

Corporation.

A publication of:

DIGITAL EQUIPMENT BCFI AB

P.O. Box 904

S-175 29 Järfälla, Sweden

Printed in Sweden, March, 1997

The information in this document is subject to change

without notice and should not be construed as a

commitment by Digital Equipment Corporation.

Digital Equipment Corporation assumes no

responsibility for any error which may appear in this

document.

Digital conducts its business in a manner that

conserves the environment and protects the safety and

health of its employees, customers, and the

community.

Digital, the Digital logo, DECbank and FBS are

trademarks of Digital Equipment Corporation.

Part number: EK-LB20A-UG.001

CONTENTS

1 INTRODUCTION 1-1

1.1 Scope 1-1

1.2 Related Documentation 1-1

1.3 Order Process 1-2

1.4 Warnings, Cautions and Notes 1-2

1.5 Manufacturers Declaration 1-3

2 INSTALLATION 2-1

2.1 Preparation 2-1

2.2 Operating Space 2-2

2.3 Removal of transport locks 2-3

2.4 Trapdoor, Lid and Document Guide 2-4

2.5 Connections and Settings 2-5

2.6 Ink Ribbon Cassette 2-6

2.6.1 Power On 2-6

2.6.2 Unpacking the Ink Ribbon Cassette 2-7

2.6.3 Centering the Skid 2-7

2.6.4 Raising the Carrier 2-8

2.6.5 Positioning the Ink Ribbon Cassette 2-8

2.6.6 Installing the Ink Ribbon Cassette 2-9

2.6.7 Installing the Skid 2-9

2.6.8 Removing Slack Ribbon 2-10

2.6.9 Ready to Print 2-10

3 SETUP 3-1

3.1 Introduction 3-1

3.1.1 Setup Functions 3-1

3.1.2 Setup Controls 3-2

3.1.3 Menu’s and Parameters 3-2

3.1.4 Changing or Viewing the Setup 3-3

3.2 Setup Example 3-4

3.2.1 Entering Setup 3-5

3.2.2 Loading a Document 3-6

3.2.3 Moving to VIEW or a Menu 3-7

3.2.4 Printing the Current Settings 3-8

3.2.5 Changing a Setting 3-8

3.2.6 Validating 3-9

3.2.7 Quitting 3-9

3.3 Setup Check 3-9

3.4 Performing a Setup 3-10

3.4.1 COM Menu 3-10

3.4.2 IBM Menu 3-10

3.4.3 DOC Menu 3-12

3.4.4 <>DFT Menu 3-18

3.4.5 <>HQD Menu 3-18

4 OPERATION 4-1

4.1 Controls and Indications 4-1

4.1.1 Confidence Test Routine 4-2

4.2 Documents 4-2

4.2.1 New Pages 4-2

4.2.2 Loading a Document 4-3

4.2.3 Stop while printing 4-4

4.2.4 Clearing Document Jams 4-4

5 MAINTENANCE 5-1

5.1 Ink Ribbon Cassette 5-2

5.1.1 Centering the Skid 5-2

5.1.2 Raising the Carrier 5-3

5.1.3 Removing the Skid 5-3

5.1.4 Removing the Old Ink Ribbon Cassette 5-4

5.1.5 Cleaning 5-4

5.1.6 Unpacking the New Ink Ribbon Cassette 5-4

5.1.7 Positioning the New Ink Ribbon Cassette 5-5

5.1.8 Installing the New Ink Ribbon Cassette 5-5

5.1.9 Reinstalling the Skid 5-6

5.1.10 Removing Slack Ribbon 5-6

5.2 Mylar Cassette 5-7

5.2.1 Centering the Skid 5-7

5.2.2 Raising the Carrier 5-8

5.2.3 Removing the Mylar Cassette 5-8

5.2.4 Inspecting the Mylar Edges (Bottom View) 5-9

5.2.5 Checking for Free Movement (Top View) 5-10

5.2.6 Reinstalling the Mylar Cassette 5-10

5.2.7 Positioning the Slider 5-11

5.3 Printhead 5-12

5.3.1 Preparation 5-12

5.3.2 Removing the Trapdoor 5-13

5.3.3 Releasing the Printhead 5-13

5.3.4 Lowering the Carrier 5-14

5.3.5 Removing the Printhead 5-14

5.3.6Reinstalling the Printhead 5-15

5.4 Cleaning of Edge Detection Sensor and Mylar Slide Hole 5-16

5.5 Cleaning the Feed Rollers 5-17

5.6 Ready to Print 5-18

6 SPECIFICATIONS 6-1

6.1 Printer Characteristics 6-1

6.2 Serial Interface - RS232C 6-2

6.2.1 Configurable Parameters 6-2

6.2.2 Serial Connector 6-2

6.2.3 Handshaking 6-3

6.3 Parallel Interface - Centronics 6-4

6.4 Documents 6-5

6.4.1 Recommendations and Restrictions 6-7

6.4.2 Passbook Thickness 6-7

6.4.3 Center Outfold Bulge 6-8

6.4.4 Passbook Squareness 6-8

7 GLOSSARY 7-1

Introduction 1-1

1 INTRODUCTION

The LB20 Printer is delivered as one of the following:

• 9 pin dot matrix Serial printer (Model: LB20A-AA)

• 9 pin dot matrix Parallel printer (Model: LB20B-AA)

When installed the printer forms an integrated part of a User’s Information System

and provides a printing function in IBM ProprinterIII emulation for the following

types of document:

• Passbooks - vertical or horizontal seam

• Envelopes

• Forms

The printer is simple to install, operate and maintain and provides a guaranteed

Print Quality for documents of thickness 0.0787 in (2 mm) or less.

1.1 Scope

This User Guide contains the following chapters:

• Introduction

• Installation

• Setup

• Operation

• Maintenance

• Specifications

• Glossary

1.2 Related Documentation

• Programmers Reference Guide (EK-LB20A-RG)

• Field Support Manual (EK-LB20A-SM)

• Spare Part Guide (EK-LB20A-PG)

Introduction 1-2

1.3 Order Process

Documentation, Accessories and Spare Parts shall be ordered from:

Digital Equipment BCFI AB, Attn. Orderdesk

P.O.Box 904

175 29 Järfälla, Sweden

Telephone: +46 8 759 4600

Facsimile: +46 8 621 1718

1.4 Warnings, Cautions and Notes

WARNING!

This type of safety instruction is used where there is a danger of injury to persons

and/or damage to the equipment or the environment. The symbol inside the triangle

indicates type of danger.

CAUTION!

This type of safety instruction is used where danger of injury to persons and/or

damage to the equipment or the environment can occur, if the instruction is not

followed.

NOTE!

Notes are used to provide important or explanatory information.

Introduction 1-3

1.5 Manufacturers Declaration

Document Number: S960242-1

This is to certify that the Digital Equipment BCFI AB, product indicated below

complies with the requirements on the EEC-Directives and/or other Standards as

indicated below and has been officially released for normal delivery to customers

and equipped with the CE-mark.

PRODUCT DESCRIPTION: Terminal Printer

DIGITAL MODEL NUMBER: LB20A-AA, LB20B-AA

This certificate is a confirmation of full compliance with the following regulations:

EEC-directive 89/336/EEC: "Electromagnetic Compatibility"

*EN 50081-1 (Emission EN 55022/1985)

*EN 50082-1 (Emission IEC 801-2, -3, -4)

EEC-Low Voltage Directive (LVD) 73/23/EEC of February 19, 1973

"Safety of Information technology equipment including electrical business

equipment"

*EN60950, 1992 + A1 + A2 + A3

Järfälla, 1996-12-19

Lars-Erik Högquist

Product Safety Manager

Installation 2-1

2 INSTALLATION

Perform the actions described and illustrated under the headings:

2.1 Preparation

Open the packing carton at one end, pull out the two foam sections and unpack the

following:

1. Mains Power Cable

2. Printer

3. User’s Guide

4. Ribbon Cartridge Box

5. Document Guide

6. Trapdoor

Note: If possible store the packing carton for future use

WARNING !

Make sure that the mains outlet connector in the building is a

Class-1 outlet with protective earth, easily accessible and the fuse

in the building protects against earth fault.

Installation 2-2

2.2 Operating Space

Place the printer on a flat, horizontal surface in a clear area as follows:

1. Back - 8in (203 mm) for document removal.

2. Sides - 4in (101mm) for air cooling.

3. Front - 10in (254 mm)for document loading.

Note: If necessary, allow further space for power and communication cable routing.

Table of contents

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide