IBM Aptiva Series User manual

The voltage selector switch should be preset for your area; however,

contact your local power company if you are uncertain of the voltage

for your area.

• If the voltage supply range in your area is 100-127V, set the voltage

selector switch so you can see 115V or 115.

• If the voltage supply range in your area is 200-240V, set the voltage

selector switch so you can see 230V or 230.

Plug the monitor and the computer into an electrical outlet. For clarity,

only the power cords are shown in this picture.

1. Unpack your Aptiva PC

2. Connect the system components

Power Cord

Keyboard

Monitor with stand you attached

(may be sold separately)

Mouse

Printer

(sold separately)

Telephone Cord

Publications and CD-ROMs

Locate the following items:

Attach components to the computer as shown.

If you need setup instructions for components that are

not shown here, refer to the back of this sheet or the

instructions that came with the component.

3. Connect the power cables

Note:

Most cable connectors are color-coded to match the

location at the back of the system unit where you

connect the cable.

Read “Safety information” in the Aptiva Handbook to

learn about connecting cables.

The location of the phone line and telephone cable

connectors on your system unit might be different

from the locations shown in this illustration. Use the

symbols on the back of the system unit as a guide.

(Continued on next page)

System Unit

115V

230V

Stand

(For Vertical System Unit)

The following figures show you how to connect additional components which may have come with your computer (or that you purchased separately). Some

components may require software or BIOS setup. Refer to the documentation that came with the component for more information.

IBM and Aptiva are trademarks or registered trademarks of International Business Machines Corporation. Microsoft, Windows, and the Windows 98 logo are trademarks or registered trademarks of Microsoft Corporation.

Microphone Joystick

4. What to do next

A. Turn on the monitor and computer. B. You must complete the Windows 98 setup. During this process,

you must type the Windows Product ID number printed on the

Certificate of Authenticity

that came with the

Introducing

Microsoft Windows 98

booklet.

During setup, review the printed documentation that came with

your computer.

When setup completes, your computer is ready for use. If you need help, see the HelpWare support and services chapter in

the

Aptiva Handbook

that came with your computer.

Save this setup poster for future reference.

C. D.

Headset Microphone

5. Connecting additional components

*00L8270*

6. Install the stand (optional on some models)

A. Set the computer on its side with the air vents

facing upward. Then, position the stand as shown

in the illustration.

Slide the stand toward the rear of the

computer until it is fully seated.

B. Carefully reposition the computer so the

stand is on the bottom.

Other manuals for Aptiva Series

Other IBM Desktop manuals

Popular Desktop manuals by other brands

HP m9060n - Pavilion - Elite Quick setup

Asus

Asus E210 Series user guide

Dell

Dell Inspiron 600m quick start

Dell

Dell Inspiron 3662 Service manual

TotalFlow

TotalFlow uFLO user manual

HP Presario SV7000 - Desktop PC manual

HP ProDesk 400 G5 Maintenance and service guide

Logitech

Logitech MK320 quick start guide

Dell

Dell XPS 730 H2C Service manual

Sony

Sony Vaio Series operating instructions

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer quick start

Alto

Alto MD 250 instruction manual

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series user manual

Sony

Sony VAIO VGX-TP1 Series user guide

Asus

Asus Eee Box B204 user manual

Dell

Dell Optiplex 9010 All In One owner's manual