I3 International Ax47R4 User manual

Ax47R/67R-series

User Manual

Before attempting to connect or operate this product, read these instructions carefully.

Save this manual for future use.

CONTENTS

1. Warnings and operation notes..................................3

2. Unpacking................................................................5

3. Dimensions & Parts Identification............................6

4. Installation............................................................7

5. Connecting to the SRX-Pro Server.........................13

6. Advanced Camera Setup.........................................18

7. Specifications.....................................................42

i3-TRNG-CAMS-Ax47R_67R-UM.indd Rev. 171109

Ax47R/67R-series User Manual

No part of this manual may be reproduced or transmitted in any form or by any means,

electronic or mechanical, including but not limited to, photocopying, recording, or by

any information storage or retrieval system, without the prior written permission of the

Annexxus is a registered trademark of i3 International Inc.

Disclaimer

This quick start guide is provided as is, without warranty of any kind, expressed or

implied, including but not limited to performance, merchantability, or fitness for any

particular purpose. Neither i3 International Inc. nor its dealers or distributors shall be

liable to any person or entity with respect to any liability, loss, or damage, caused or

alleged to have been caused directly or indirectly by this information.

Furthermore, i3 International Inc. reserves the right to revise this publication, and to

make changes to the content at any time, without notice.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

Firmware: 02_49-101

Address:

i3 International Inc.

780 Birchmount Road, Unit 16

Scarborough, ON M1K 5H4

Canada

Tech Support: 1.877.877.7241

Email: [email protected]

Web Site: www.i3international.com

3Rev. 171109i3-TRNG-CAMS-Ax47R_67R-UM.indd

1. Warnings and operation notes

Please read this guide carefully before you install the camera.

Keep this guide for future reference.

Thank you for purchasing an i3 Ax47R/67R-series IR Outdoor Dome Camera.

If the system needs to be modified or repaired, contact a certified i3 International

Dealer/Installer. When serviced by unauthorized technician, the system warranty will

be voided. Should you have any problems or questions regarding our products, contact

your local i3 International Dealer/Installer.

WARNING! To reduce the risk of fire or electric shock, do not

expose the product to rain or moisture.

Camera’s default IP address is 192.0.0.16

Camera’s default Subnet mask address is 255.255.255.0.

Default camera User Name: i3admin and default Password: i3admin

1.1 Precautions

Installation and servicing should be performed only by qualified and

experienced technicians to conform to all local codes and to maintain your

warranty.

When installing your Ax47R/67R camera, be sure to avoid:

• excessive heat, such as direct sunlight or heating appliances

• contaminants such as dust and smoke

• strong magnetic fields

• sources of powerful electromagnetic radiation such as radios or TV transmitters

• moisture and humidity

• areas with mechanical vibrations

• fluorescent lamps or objects that reflect light

• unstable light sources as this may cause flickering

• temperatures below -20°C (-4°F) and above 50°C (122°F)

i3-TRNG-CAMS-Ax47R_67R-UM.indd Rev. 171109

1.2 Power

This camera supports PoE power only. IEEE 802.3af Class 3, max load of 8.5W.

Incorrect voltage may cause irreparable damage to the video camera and will

effectively void the camera warranty. For PoE power, insert the RJ45 cable into

the RJ45 jack on the camera’s cable. Connect the other end of the RJ45 cable to

a compatible PoE switch/hub/router. Use the included RJ45 waterproof connector

assembly for outdoor installations.

1.3 Cleaning

• For maximum optical clarity, the camera or lens must remain clean. Use a soft, dry

cloth to remove finger prints and dust from the dome cover.

• Use a blower to remove dust from the lens.

• Clean the body with a soft, dry cloth. If it is very dirty, use a cloth dampened with a

small quantity of neutral detergent, then wipe dry.

• Do not use volatile solvents such as alcohol, benzene, or thinners, as they may

damage the surface finish.

1.4 Servicing

To avoid electrical shock and to preserve the product warranty, DO NOT disassemble

the camera. Refer servicing to qualified personnel only.

1.5 Routine Maintenance

• The dome bubble is an optical part. Use a soft and dry cloth to remove any

fingerprints and dust.

• Clean the camera housing with a soft and dry cloth. For more stubborn marks, use

a cloth dampened with a small quantity of neutral detergent, then wipe dry.

• CAUTION: Do not use volatile solvents such as alcohol, benzene or

thinners, as they may damage the surface finish.

5Rev. 171109i3-TRNG-CAMS-Ax47R_67R-UM.indd

2. Unpacking

Ensure that the items received match those listed on the order form and the packing

slip. In addition to this manual and a fully assembled camera, the dome camera

packing box includes:

1. Drill Template sticker x1

2. Torx key x1

3. Plastic Anchor x3

4. Round Head Screw (Tapping type) x3

5. Desiccant (attach to the inside of the Inner Liner) x1

6. 3-ft network cable x1

If any parts are missing or damaged, contact the dealer you purchased the camera

from.

*Note: Based on installation location and surface type, supplied screws and anchors

may not be adequate. Mounting hardware is site-specific and may need to be supplied

by the installer.

2.1 Accessories (not to scale)

1 2 3 4 5

3-Ø4.5 holes

(for plastic anchor)

Cable hole

Logo Direction

i3-TRNG-CAMS-Ax47R_67R-UM.indd Rev. 171109

3. Dimensions & Parts Identification

This dome camera is suitable for both indoor and outdoor installation in commercial

and residential environment. With 3-axis mount support, it provides flexible installation

on a ceiling or wall, even on an angle. The dome camera is a fully integrated enclosure

with camera and lens.

50.5 mm

110.97 mm

82 mm

7Rev. 171109i3-TRNG-CAMS-Ax47R_67R-UM.indd

1. Mounting holes (x3)

2. Dome bubble housing / Dome cover

3. Screws securing the dome bubble housing to camera module (x3, silver)

4. Lexan bubble

5. Screws attaching camera module to the camera base (x4, black)

6. Tilt bracket with two locking screws. Loosen the screws and tilt to adjust

lens angle.

7. Inner liner / Shroud. Attach the desiccant to the inside of the Inner Liner, without

obstructing the lens movement.

8. IR board

9. Camera Lens Assembly. Pan to adjust lens angle.

10. Lens base. Rotate to adjust lens angle.

11. Camera lens.

12. RJ45 Ethernet PoE Port with waterproof RJ45 connector assembly.

Insert an Ethernet cable into the port for network connection as well as PoE (Power

over Ethernet) capability. To maintain water-resistant rating in outdoor installations,

make sure to use the included waterproof RJ45 Connector assembly.

13. Reset/Default button. Press for 1 second to reboot the camera. Press for 6 seconds

to restore camera settings to factory defaults.

14. MicroSD Card slot for on-camera video storage. (MicroSD card sold separately).

4. Installation

Ax47R/67R camera series can be wall, surface, or T-bar ceiling mounted without

additional mounting accessories/brackets.

Start by marking out and preparing the mounting surface. Attach the supplied mounting

template to the mounting surface. Use the appropriate brackets and equipment

to mount the camera. Depending on the type of installation, additional mounting

accessories may need to be purchased.

After installing the camera, your network camera must be accessible from your local

network (LAN).

Optional Mounting Accessories:

• Ax61BB (Back Box 3/4” & 1/2” NPT). Use for Horizontal wall mount, pendant

mount, pole or corner mount.

• DB60 (Goose Neck Wall Bracket 3/4” NTP). Together with the optional DB60CPM

bracket, DB60 goose neck bracket has the capability of being corner or pole-

mounted.

• DB60CPM (Corner / Pole Mount bracket for DB60)

Important. Please Read:

• It is the installer’s responsibility to ensure that the mounting surface is

suitable for the chosen installation method.

• Based on installation location and surface type, supplied screws and anchors

may not be adequate.

• Mounting hardware is site-specific and may need to be supplied by the installer.

i3-TRNG-CAMS-Ax47R_67R-UM.indd Rev. 171109

4.2 Applying the Desiccant

Apply the desiccant to the inside of the Inner liner (Shroud). Make sure it does not

interfere with the movement of the lens assembly.

4.1 Disassembling the Camera

Before mounting and adjusting the camera, follow these steps to disassemble the

camera.

1. Use the provided security Torx key to

loosen three screws securing the dome

bubble housing to camera module. Do

not completely remove the screws from

the dome bubble.

2. Gently pull the dome bubble downwards

and set aside.

9Rev. 171109i3-TRNG-CAMS-Ax47R_67R-UM.indd

4.3 3-Axis lens position adjustment

Pan Adjustment

Rotate the lens base (max 360°) until satisfied with the field of view.

Note: Over-rotation past 360° will cause internal cables to become damaged,

disconnected, or twisted.

Horizontal Rotation

Firmly grasp the camera lens assembly and rotate counter-clockwise / clockwise (max

350°) until satisfied with the field of view.

Note: Over-rotation past 350° will cause internal cables to become damaged,

disconnected, or twisted.

Tilt Adjustment

Tilt the camera lens until satisfied with the field of view.

Once the desired view has been achieved, replace the camera liner until it snaps into

place.

20°~90°

0°~350° (±175°)

0°~360°

Pan Adjustment

Horizontal Rotation

Tilt Adjustment

i3-TRNG-CAMS-Ax47R_67R-UM.indd Rev. 171109

4.4 Surface Mounting

This installation method is suitable for both indoor and outdoor applications.

1. Attach the supplied Drill Template to the

mounting surface.

2. Drill 3 (three) 4.5 mm (0.2”) holes at the

marked template positions on the mounting

surface.

3. Insert the supplied screw anchors into the

holes on mounting surface.

4. Based on installation requirements, you

may route the cable through the cut-

out opening on the side of the camera’s

mounting base. In that case, no additional

openings are required on the mounting

surface. Alternatively, drill a 13mm (0.5”)

circular opening in the mounting surface,

corresponding to the “Cable hole” of the

drill template.

See section 4.4 fore more

info.

5. Disassemble the camera by removing the

dome bubble. Use the provided security

Torx key to loosen three silver screws

securing the dome bubble to the camera’s

mounting base. Do not completely remove

the screws from the bubble. Lift the dome

bubble off and set aside.

6. Route the camera cabling according to

installation requirements, then use a

Phillips screwdriver to secure the camera

module to the mounting surface with the

provided mounting screws, if suitable.

7. Connect the wiring.

8. Adjust the lens angle by rotating and panning the camera lens base. Do not over-

rotate the camera lens beyond the stop point to avoid damage to the camera.

See

section 4.1 for more info.

Tip: For the ease of setup, lift off the camera liner while adjusting the lens position.

Once the desired view has been achieved, replace the camera liner until it snaps

into place.

9. Replace the camera dome bubble housing on top of the camera module.

10. Use the supplied Torx bit to re-tighten 3 silver screws securing the dome bubble

housing to the camera module.

11. Remember to use sealant to maintain IP67 rating in outdoor installations.

This manual suits for next models

Table of contents

Other i3 International Security Camera manuals

i3 International

i3 International Ax50D User manual

i3 International

i3 International i3F416U User manual

i3 International

i3 International Di721 User manual

i3 International

i3 International Am42 Series User manual

i3 International

i3 International Ax47R series User manual

i3 International

i3 International Ax85 User manual

i3 International

i3 International C-AX401D1M User manual

i3 International

i3 International Ax51B User manual

i3 International

i3 International Ax65W User manual

i3 International

i3 International Ax52 Series User manual

i3 International

i3 International Ax68R/Ax78R User manual

i3 International

i3 International Ax46-series User manual

i3 International

i3 International Ax52D2MV User manual

i3 International

i3 International Ax61 series Operating and maintenance instructions

i3 International

i3 International A 47DC Series User manual

i3 International

i3 International Ax49D User manual

i3 International

i3 International Ax63Z Series User manual

i3 International

i3 International Am52RM User manual

i3 International

i3 International Ax32V Series User manual

i3 International

i3 International H59B2 User manual

i3 International

i3 International Am53 User manual

i3 International

i3 International Am57 User manual

i3 International

i3 International Ax47R series User manual

i3 International

i3 International Ax40W2 series User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications

i3 International Ax47R4 User manual

Popular Security Camera manuals by other brands