Human Touch IJoy-100 User manual

Table of contents

Other Human Touch Massager manuals

Human Touch

Human Touch iJOY-245 User manual

Human Touch

Human Touch Acuvibe ht1220 User manual

Human Touch

Human Touch CirQlation 2 User manual

Human Touch

Human Touch HT 5270 User manual

Human Touch

Human Touch SUPER NOVO 2.0 User manual

Human Touch

Human Touch Serenity Plus PC 086 User manual

Human Touch

Human Touch ht 149 User manual

Human Touch

Human Touch ZeroG 4.0 User manual

Human Touch

Human Touch ht 135 User manual

Human Touch

Human Touch wholebody 7.1 User manual

Human Touch

Human Touch iJoy-241 User manual

Human Touch

Human Touch SANA User manual

Human Touch

Human Touch iJOY REVEAL User manual

Human Touch

Human Touch ZeroG 5.0 User manual

Human Touch

Human Touch iJoy User manual

Human Touch

Human Touch AcuTouch 8.0 User manual

Human Touch

Human Touch iJoy User manual

Human Touch

Human Touch PC-420 User manual

Human Touch

Human Touch pc 075 User manual

Human Touch

Human Touch acuTouch 9500 User manual

Human Touch

Human Touch iJoy-200 User manual

Human Touch

Human Touch PC-095 User manual

Human Touch

Human Touch zero G 5.0 User manual

Human Touch

Human Touch Ht 136 User manual

Popular Massager manuals by other brands

ELEEELS

ELEEELS P2 instruction manual

Cenocco

Cenocco CC-9111 user manual

Panasonic

Panasonic EP790-C1 Service manual

Adler

Adler AD 2167 user manual

Taurus

Taurus Wellness TW-MC-M Assembly and operating instructions

Infinity

Infinity Syner-D Circadian Assembly guide

Hydas

Hydas LH-095 instruction manual

AEG

AEG FM 5567 instruction manual

OBH Nordica

OBH Nordica Shiatus Tunes manual

Hutech

Hutech Q9 user manual

Medisana

Medisana MM 825 user manual

SOLAC

SOLAC Therma Hydro Instructions for use

Invacare

Invacare Texas user manual

Casada

Casada Bismarck II manual

Fujiiryoki

Fujiiryoki Cyber-Relax EC-1700 user manual

Medisana

Medisana HM 886 instruction manual

HoMedics

HoMedics BA-C200 instruction manual

Repose

Repose Lynton user manual

Human Touch Confidential Page 1

JJHuman Touch iJoy-100 Replacing the Main PCB

Initiator: MG Replaces: 07/22/03 Revision date: 08/24/2006

Title: Replacement of the iJoy Main PCB Module

Purpose: To provide end users with the procedure for replacement of the iJoy’s Main Control Board PCB

module assembly.

Tools/Parts Required: Phillips Screwdriver, diagonal cutters, (Paper Clip or needle Nose Pliers)

Requires Main PCB Module

Procedure:

1) TURN OFF AND UNPLUG YOUR iJoy FROM AC WALL OUTLET

2) Carefully tip your chair onto its Right Side (the side opposite the AC

cord). NOTE: Your Model may vary in appearance from the model

shown.

3) Locate the zippered flap underneath the iJoy. Unzip the zipper to reveal

the inside cavity of the seat assembly. If the zipper does not have a Pull

Tab, insert a Paper Clip through the pull hole as a temporary tab.

4) Remove the four screws securing the Main PCB Module to the frame of

the chair. The Main PCB Module (case) will be white or black depending

on your model. While supporting the weight of the Main PCB Module,

carefully move it out from the cavity of the chair.

5) Disconnect the Three (3) white plugs leading to the Main PCB Module.

You may need to cut cable/zip ties that are securing the cables. Take

care not to cut the wires. In some cases, you may also need to remove

hot melt glue from the connectors. This may be carefully removed with

the blade of a screwdriver, or by hand.

6) Remove the Main PCB Module from the seat cavity and set aside for

return to Human Touch.

7) Place the new Main PCB Module in position and replace the four (4)

screws removed in step 5.

8) Reconnect the Three (3) white plugs removed in step 5.

9) Close the zippered bottom flap, and place the iJoy upright.

10) Plug the iJoy back into the wall outlet, and turn the Main Power Switch

on.

11) Test the chair for proper operation.

Human Touch Confidential Page 2

Title: Replacement of the iJoy Main PCB Module

PCB

Module

IJoy on its Right Side

Bottom cover open

Bottom

Cover

Four

Screws

Detail insert of Zipper

with no tab

Four screws securing Main

PCB module to frame

Three cable connectors

Main

PCB

Module

Zipper

Main PCB

Module