HP Pavilion p6000 - Desktop PC Guide

Other manuals for Pavilion p6000 - Desktop PC

8

This manual suits for next models

1

Table of contents

Other HP Storage manuals

HP

HP P700 User manual

HP

HP StorageWorks 1510i - Modular Smart Array User manual

HP

HP StorageWorks XP10000 - Disk Array User manual

HP

HP Portable Hard Drive User manual

HP

HP DW017B - StorageWorks Ultrium 448 Tape Drive User manual

HP

HP MSA 1050 Programming manual

HP

HP StorageWorks XP1024 User manual

HP

HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM User manual

HP

HP 3PAR StoreServ 7000 Technical manual

HP

HP 7906 User manual

HP

HP 3PAR StoreServ 7000 User manual

HP

HP Surestore 6164 - Switch User manual

HP

HP M8502 User manual

HP

HP StorageWorks DAT320 USB Instruction Manual

HP

HP Storevirtual 4000 Quick reference guide

HP

HP StorageWorks P4000 Series User manual

HP

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Instruction Manual

HP

HP Surestore 6164 - Switch User manual

HP

HP POD 40c G2 Manual

HP

HP LTO-4 FH User manual

HP

HP StorageWorks XP48 - Disk Array User manual

HP

HP OmniBook 3100 - Notebook PC User manual

HP

HP StorageWorks D2700 User manual

HP

HP StorageWorks MSL2024 User instructions

Popular Storage manuals by other brands

QNAP

QNAP TS 32PXU Series user guide

LaCie

LaCie RUGGED RAID user manual

Freecom

Freecom CLS DOCK Quick install guide

PNY

PNY Attache P-FD64MBATT3 install guide

OLT

OLT 6x6 Maximizer Assembly manual

Transcend

Transcend JetFlash 160 Specifications

LaCie

LaCie RUGGED MINI user manual

Thunderbolt

Thunderbolt 600 user manual

Panasonic

Panasonic LB-DH8 series Operator's guide

Intel

Intel RAID High Availability user guide

LaCie

LaCie 12big Thunderbolt 3 Quick install guide

Spectra Logic

Spectra Logic T-Series Spectra T50e quick start guide

Panasonic

Panasonic LKM-F931-1 instruction manual

Tabernus

Tabernus Enterprise Erase E2400 user guide

Rocstor

Rocstor COMMANDER 3F series user manual

Western Digital

Western Digital Ultrastar Data60 installation guide

Dell

Dell PowerVault MD3600f Series Getting started

CFI

CFI TERA STOR SATA RAID IV user manual

HP P6500 EVA Controller

Y-cable Replacement Instructions

© Copyright 2011 Hewlett-Packard Development Company, L.P.

First edition: May 2011

The information in this document is subject to change without notice.

Printed in Puerto Rico

www.hp.com

*593098-001*

About this document

For the latest documentation, go to http://www.hp.com/support/

manuals, and select your product.

The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in the

express warranty statements accompanying such products and services.

Nothing herein should be construed as constituting an additional

warranty. HP shall not be liable for technical or editorial errors or

omissions contained herein.

WARRANTY INFORMATION

To obtain a copy of the warranty for this product, see the warranty

information website: http://www.hp.com/go/storagewarranty

Before you begin

Observe the following precautions when replacing the Y-cable:

•Ensure that the array is either operational and stable on the redundant

path for the device ports being serviced or the array has been shut

down.

•Label the replacement cable before installing it. See Labeling the re-

placement Y-cable.

NOTE:

The Y-cable is replaced as part of the troubleshooting process

to address a communication failure.

Labeling the replacement Y-cable

Before you remove the cable, label the replacement cable with the port

numbers using the label kit that shipped with the cable. Four sheets of

labels (two red and two green) contain all the port numbers you need.

Label the new cable to match the port labels on the original cable.

The replacement cable should resemble Figure 1.

Page 1

2. Port number label

1. Pull tab (may also be a release

bar)

Figure 1 Y-cable

.

Replacing a Y-cable

To ensure the replacement cable is configured the same as the original

cable, HP recommends that you replace one end at a time.

1. Remove the end of the cable that is connected to the controller port

(DP-A or DP-B) (P0 in Figure 1).

NOTE:

The cable release may be either a pull tab or a release

bar.

2. Insert the new cable head into the controller port (DP-A or DP-B).

3. Remove the end of the cable that is connected to the disk enclosure

port (P1 or P2) (cable head P1 (DP 1) in Figure 1.)

4. Insert the new cable end into the disk enclosure port (P1 or P2).

5. Remove the end of the cable that is connected to the second port

(cable head P2 (DP 2) in Figure 1.)

6. Insert the new cable end into the disk enclosure port (P1 or P2).

Verifying proper operation

Use HP P6000 Command View to verify that the device ports are

enabled.

Page 2