HP Tc4100 - Server - 256 MB RAM User manual
HP Tower Server tc4100 with
HP Surestore Virtual Array 7100/7400
Windowsâ2000 Advanced Server
Cluster Configuration Guide
Introduction
This document defines the server cluster configurations supported by Hewlett-Packard for interconnection of
two HP tc4100 servers and one or two HP VA 7100 or 7400 disk drive enclosure(s), with MicrosoftâCluster
Server software. These configurations provide high server cluster availability and minimize single points of
failure (SPOFs). Hewlett-Packard will support any cluster configuration that conforms to the guidelines of
this document. Deviations from the supported configurations can result in an inoperative cluster, an
operating cluster with degraded performance, or hidden SPOFs. Therefore, deviations are not supported. For
revision/update information on this document, refer to Versions on page 10.
Cluster Configuration Elements
This section identifies the hardware components, system software, network interfaces, and power distribution
arrangement required to build an operational server cluster supported by Hewlett-Packard. The various
server cluster elements are listed below, and their associated configuration data is detailed in separate tables
and illustrations that follow.
· Server configuration
· Shared storage configuration
· Intra-cluster (heartbeat) LAN configuration
· Client LAN configuration
· FC cabling configuration
· Supported Fibre Channel topologies
· Power distribution configuration
Server Configuration
Parameter Specification
Server
Type HP Tower Server tc4100
Number of nodes Two
Each node must be the same server type, but nodes may differ in their CPU clock
speeds and cache sizes, and amounts of main memory.
Clock speed 1.40 GHz, or any CPU within the same processor family
Number of CPUs Two
BIOS Version 4.06.12 RI, or later
CPU cache Any size
RAM Recommended 512 MB, minimum. Must be HP.
Number of power
supplies
One standard, two required for redundancy
5/2/02 1
tc41002k71-74
Server Configuration
Parameter Specification
I/O slots Added cards may be installed in any appropriate slot, considering the server
default boot order provided below.
Default boot order IDE CD-ROM, FDD, embedded SCSI A, embedded SCSI B, PCI slot 6, PCI slot
5, PCI slot 4, PCI slot 3, PCI slot 2, PCI slot 1, integrated NIC
Local Storage
Controller Embedded SCSI or NetRAID-1M
Driver For embedded SCSI, sym_u3.sys, version 5.07, or later
For NetRAID-1M, mraid2k.sys, version 5.20
(drivers obtained from Navigator CD-ROM, version M.04.60, or later)
Physical drive location Server internal drive bays, or HP external drive cabinet
(e.g., HP Rack Storage/12)
Disk drives Must be HP
SCSI bus Any HP cables that meet SCSI specifications, and any SCSI bus speed
SCSI IDs Any
System software
Navigator CD-ROM Version M.04.60, or later
Operating system
Service pack
Microsoft Windowsâ2000 Advanced Server
Latest service pack
HP Surestore Auto Path
VA
Version 1.03.00 or later.
Required only if two Fibre Channel Host Bus Adapters are configured for shared
storage. No Load Balancing is set for the FC HBA devices on each node. See the
dual HBA diagrams on pages 5 and 7 for more information.
Shared Storage Configuration
Parameter Specification
Controller
Model HP D8602B Fibre Channel Host Bus Adapter
Number of controllers One or two
Dual HBA controller configurations require running HP Surestore Auto Path VA.
Note that the purpose of the second HBA is to provide an alternate path for
automatic failover only.
Driver Afcw2k.sys, version 3.0.4107.0
Registry settings N_Port enabled for Fabric configurations
NL_Port enabled for Arbitrated Loop configurations
Refer to the readme file included with the HBA driver for instructions on
modifying driver parameters.
RAID levels AutoRAID, or RAID 1+ 0
Logical disks Sixteen LUNs, maximum, per cluster
Connection Supports copper or optical GBIC (optical GBIC not included). Optical cable
requires SC connection.
Enclosures HP Surestore Virtual Array 7100, Models A6261A, A6262A, or A6263A
HP Surestore Virtual Array 7400, Models A6264A, A6265A, or A6214A
5/2/02 2
tc41002k71-74
Shared Storage Configuration
Parameter Specification
Number of enclosures One or two per cluster
Number of clusters One or two per Virtual Array enclosure
Consult your HP Reseller or HP storage specialist if planning configurations that
may require support for additional MSCS clusters or additional non-clustered
servers.
Disk drives 18 GB, 15K rpm, product numbers A6191A or A6228A
36 GB, 10K rpm, product numbers A6192A or A6229A
36 GB, 15K rpm, product numbers A6193A
73 GB, 10K rpm, product number A6194A or A6231A
Firmware HP14
Virtual Front Panel
settings
Topology 1 – Private Loop (default)
4 - Fabric
Host port behavior Win2000
Host FC connector VA 7100 – Requires optical GBIC (not included) and optical SC cable
connection.
VA 7400 – Requires SFP (small form-factor pluggable) optical interface (not
included) and optical LC cable connection.
Optional additional
storage
DS2405 – product numbers A6250A, A6250AZ (factory racked), A6250AE
(without disks)
Up to six DS2405 enclosures can be cascaded from each VA7400 for additional
shared disk storage in a cluster. Requires optical LC cable connection.
Switches
HP Surestore FC 1Gb/
2Gb Entry Switch 8B
HP Surestore FC
1Gb/2Gb Switch 8B
HP Surestore FC
1Gb/2Gb Switch 16B
HP Brocade Silkworm
2800
HP Netserver 8 Port
Fibre Loop Switch
8 port auto-sensing FC fabric switch with single E port, product numbers A7346A
or A7346AZ (factory racked) – Requires SFPs (not included) and optical LC
cable connections.
8 univeral port auto-sensing FC fabric switch, product numbers A7347A or
A7347AZ (factory racked) – Requires SFPs (not included) and optical LC cable
connections.
16 universal port auto-sensing FC fabric switch, product numbers A7340A or
A7340AZ (factory racked) – Requires SFPs (not included) and optical LC cable
connections.
16 port FC switch, product numbers A5624A or A5624AZ (factory racked) –
Requires optical GBICs (not included) and optical SC cable connections.
8 port Fibre Channel loop switch, product number P4459A– Supports copper or
optical GBICs (optical GBICs not included). Optical cable requires SC
connection.
Cables and GBICs
Copper
HBA to 8 Port
Loop switch
Copper cabling is supported from the HBA to the 8 Port Loop Switch only.
3 meter cable, product number D6978A (includes two copper GBICs)
5 meter cable, product number D6979A (includes two copper GBICs)
10 meter cable, product number D7080A (includes two copper GBICs)
5/2/02 3
tc41002k71-74
Shared Storage Configuration
Parameter Specification
Fiber Optic
HBA to Brocade
2800 or loop
switch
(SC to SC)
Only an optical fiber connection is supported to the storage, either directly from
the HBA or from a switch.
50 meter cable, product number D6980A (includes two SW GBICs)
100 meter cable, product number D6981A (includes two SW GBICs)
2 meter cable, product number A3583A (GBICs not included)
16 meter cable, product number A3531A (GBICs not included)
50 meter cable, product number A3735A (GBICs not included)
100 meter cable, product number A3736A (GBICs not included)
From HBA or
Brocade 2800 or
loop switch
To VA 7100
(SC to SC)
To VA 7400
(SC to LC)
From 1Gb/2Gb
switch to VA7100
(LC to SC)
From 1 Gb/2Gb
switch to VA7400,
or between
1Gb/2Gb switches,
or from VA7400 to
DS2405
(LC to LC)
2 meter cable, product number A3583A (GBICs not included)
16 meter cable, product number A3531A (GBICs not included)
50 meter cable, product number A3735A (GBICs not included)
100 meter cable, product number A3736A (GBICs not included)
2 meter cable, product number C7529A (GBIC and SFP not included)
16 meter cable, product number C7530A (GBIC and SFP not included)
2 meter cable, product number C7529A (GBIC and SFP not included)
16 meter cable, product number C7530A (GBIC and SFP not included)
2 meter cable, product number C7524A (SFPs not included)
16 meter cable, product number C7525A (SFPs not included)
50 meter cable, product number C7526A (SFPs not included)
200 meter cable, product number C7527A (SFPs not included)
GBICs
SFPs
Short wavelength optical GBIC (for HBA, loop switch or Brocade 2800 switch),
product numbers A5225A or D6975A
Short wavelength SFP, product number A6515A
Long wave length SFP, product number A6516A
Intra-Cluster (Heartbeat) LAN Configuration
Parameter Specification
Network
Connection HP D5954A crossover cable, or equivalent.
The intra-cluster LAN may only be used for cluster node communication. It may
not be used for client communication.
NIC
Quantity One, minimum
5/2/02 4
tc41002k71-74
Intra-Cluster (Heartbeat) LAN Configuration
Parameter Specification
Model Integrated NIC, HP 10/100 IPSec 3DES, Model P3492A, or any LAN adapter that
is on both the HP Tested Products List and the Microsoft®Hardware
Compatibility List
Driver For integrated NIC or P3492A, latest version from Navigator CD-ROM or HP
technical support web site.
For other NICs, any vendor-supported driver.
Client LAN Configuration
Parameter Specification
Network
Connection Any LAN
NIC
Quantity One, minimum
Model Any model that is on both the HP Tested Products List and the Microsoftâ
Hardware Compatibility List
Driver Vendor-supported driver
If the NIC used is the same as that of the intra-cluster LAN, then the client LAN
driver must be the same as that of the intra-cluster LAN.
5/2/02 5
tc41002k71-74
Server
1
Server
2
Private
Network
FC Hub/Switch
Primary Active Path* Secondary Path for Failover
Public Network
HP Dual HBA Cluster
V
A 7100
*Preferred path mode only.
FC Hub/Switch
(LUN owner)
5/2/02 6
tc41002k71-74
Server
1
Server
2
Private
Network
FC Hub/Switch
Primary path for RG 1*
Secondary path for RG 2 Secondary path for RG 1
Primary path for RG 2*
FC Hub/Switch
Public Network
HP Dual HBA Cluster
V
A 7400
*Preferred path mode only.
()
Redundancy Group1 owner
()
Redundancy Group 2 owner
HOST FC HOST FC
Performance note:
For best performance, If Server 1 and Server 2 are configured in an active/active cluster
configuration, where each is running a critical application software, each application should
use LUNs owned by a different VA controller, and the primary path of the server running the
application should be to the VA controller owning that application’s LUNs.
5/2/02 7
tc41002k71-74
NL_Port
Direct Connection
Private Arbitrated Loop with Two Switches and Redundant Paths Using AutoPathTwo HBAs -
Switched Fabric with Two Switches and Two HBAs - Redundant Paths Using AutoPath
FL_Port FL_Port
F_Port
VA 7 X 0 0
VA 7 X 0 0
VA 7 X 0 0
Brocade or
Loop Switch
Brocade Switch Brocade Switch
NL_Port
N_Port
optical fiber cable
optical fiber cable
optical fiber cable
optical fiber or copper cables
optical fiber or copper cables
NL_Port NL_Port
NL_Port NL_Port
N_Port N_Port
tc4100 tc4100
tc4100
tc4100
tc4100
tc4100
Brocade or
Loop Switch
(No other servers can be connected to the Virtual Array)
(A second cluster, or additional servers can be connected to the Virtual Array)
Supported Topologies for the HP tc4100, Virtual Array Cluster
5/2/02 8
tc41002k71-74
Power Cabling to Separate Power Circuits
5/2/02 9
tc41002k71-74
Versions
02 May 2002 Added support for DS2405 for additional storage.
25 April 2002 Removed discontinued S10/L10 hub and Brocade 2400 switch.
17 April 2002 Updated topology diagram. Added 2 GB FC switches and cables.
01 April 2002 Initial release
ãCopyright 2002, Hewlett-Packard Company
5/2/02 10
Other manuals for Tc4100 - Server - 256 MB RAM
9
This manual suits for next models
1
Table of contents
Other HP Server manuals
HP
HP D7171A - NetServer - LPr Service manual
HP
HP ProLiant DL320e Gen8 v2 Manual
HP
HP 4700 Installation and user guide
HP
HP Cluster Platform Hardware Kits v2010 Assembly Instructions
HP
HP ProLiant XL230a Gen9 User manual
HP
HP D7171A - NetServer - LPr User manual
HP
HP ProLiant DL120 G7 User manual
HP
HP LaserJet 9000 User guide
HP
HP T5125 - Compaq Thin Client Service manual
HP
HP ProLiant MicroServer User instructions
HP
HP T5700 - compaq thin client Quick start guide
HP
HP T5545 - Thin Client - 512 MB RAM Service manual
HP
HP t5335z Specification sheet
HP
HP Proliant DL580 User instructions
HP
HP 127695-B21 - Smart Array 431 RAID Controller User manual
HP
HP D7171A - NetServer - LPr User manual
HP
HP LC2000r - NetServer - 128 MB RAM User manual
HP
HP ProLiant BL660c Gen9 Manual
HP
HP Cluster Platform Introduction v2010 Reference manual
HP
HP Rp3440-4 - 9000 - 0 MB RAM User manual
