HP Cluster Platform Hardware Kits v2010 User manual
HP Cluster Platform
Cisco SFS 7012D InfiniBand Interconnect
Cable Management Brackets Installation
Guide
HP Part Number: 5992-0556
Published: May 2007
©Copyright 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
Printed in the U.S.A.
Table of Contents
1 Preparing for Installation................................................................................................9
1.1 Audience...........................................................................................................................................9
1.2 Documentation Resources.................................................................................................................9
1.3 Kit Description..................................................................................................................................9
1.4 Kit Contents.......................................................................................................................................9
1.5 Required Resources.........................................................................................................................10
2 Installing the Cable Management Brackets...............................................................13
2.1 Cable Routing Options....................................................................................................................14
2.2 Removing the Cisco SFS 7012D InfiniBand Interconnect for Service.............................................14
Table of Contents 3
4
List of Figures
1-1 Cable Management Brackets.........................................................................................................10
2-1 Installing the Cable Management Brackets...................................................................................13
2-2 Cable Routing Options..................................................................................................................14
5
6
List of Tables
1-1 Fasteners........................................................................................................................................10
7
8
1 Preparing for Installation
1.1 Audience
This guide is intended for HP service representatives and other persons trained to install hardware
options in HP 10000 series racks. Such persons are expected to understand the hazards of working
in this environment and to take suitable precautions to minimize danger to themselves and
others.
1.2 Documentation Resources
You can download the documentation for components referenced in this installation guide from
the following locations:
HP 10K Series Rack (Documentation
option):
http://h18004.www1.hp.com/products/servers/proliantstorage/racks
HP Cluster Platform: http://www.hp.com/techservers/clusters/xc_clusters.html
Cisco SFS 70xxD Series InfiniBand
Interconnect Read This First:
Documentation Roadmap
http://docs.hp.com/en/AC-CIBRM-1A/AC-CIBRM-1A.pdf
1.3 Kit Description
The cable management brackets described in this manual are designed to align and support the
InfiniBand cables that lead from an HP Cluster Platform Cisco SFS 7012D InfiniBand Interconnect
to the PCI interface cards installed in each server (node). The brackets provide strain relief for
the ports and cables and ensures a good connection. It also ensures the correct bend radius for
the cables and provides the necessary channels to route the cables and cable management.
1.4 Kit Contents
The kit contains the following components:
• The cable management brackets shown in Figure 1-1 “Cable Management Brackets”.
1.1 Audience 9
Figure 1-1 Cable Management Brackets
1
2
3
The following list corresponds to the callouts shown in Figure 1-1.
1. Cable management bracket – right side
2. Cable management bracket – left side
3. Right side cable management bracket top and side views (left side cable management
bracket opposite).
• The fasteners that are specified in Table 1-1.
Table 1-1 Fasteners
DescriptionTorqueFormatSizeQty.
Cage nut for M6 x 16mm screw.N/ASquare nutM6 cage nuts4
Machine screw, Phillips head. For use with the cage
nut.
30 in/lbPhillips
(Posidrive)
M6 x 16mm
screws
4
• Packaging and documentation.
To prevent screws from becoming loose because of vibration, HP recommends that you use an
adjustable torque driver set to the torque specifications given in Table 1-1. Contact your HP sales
representative if any parts are missing.
1.5 Required Resources
To install the kit, you require the following resources:
• Tools:
— Screwdriver, #2 (medium) Phillips.
— Cage-nut insertion tool (shipped with the rack) or a flat-bladed screwdriver.
— Marker pen or masking tape.
• Resources: A sample cable of the type used by the system interconnect.
• Environment:
10 Preparing for Installation
Other manuals for Cluster Platform Hardware Kits v2010
8
This manual suits for next models
1
Table of contents
Other HP Server manuals
HP
HP P5389A - Intel Pentium III-S 1.4 GHz Processor... Service manual
HP
HP ProLiant XL270d Gen9 Manual
HP
HP ProLiant DL585 G7 User manual
HP
HP P2000 G3 Instruction Manual
HP
HP ProLiant DL388 User manual
HP
HP SimpliVity OmniCube CN-3400 Product manual
HP
HP ProLiant DL385 G7 Manual
HP
HP DL360 - ProLiant - Photon User manual
HP
HP ProLiant DL585 Generation 2 Manual
HP
HP ProLiant SL2x170z - G6 Server Manual
HP
HP Integrity Superdome SX1000 User manual
HP
HP ProLiant DL160se - G6 Server Manual
HP
HP ProLiant DL360e Installation instructions
HP
HP ProLiant ML310e Gen Assembly instructions
HP
HP T5720 - Compaq Thin Client Manual
HP
HP ProLiant DL380 G7 User manual
HP
HP Integrity BL860c User manual
HP
HP D7171A - NetServer - LPr User manual
HP
HP T5730w - Compaq Thin Client User instructions
HP
HP P4800 G2 Operating manual
