HP VMA Series Instruction sheet

HP VMA-series Cable Management System –

Read This First

HP Part Number: A0R63-9002A

Published: September 2012

Edition: 1

© Copyright 2012 Hewlett-Packard Development Company, L. P.

Installing the cable management brackets

The Cable Management System (CMS), also called a Cable Management Arm (CMA) keeps the cables

from becoming entangled when the system is fully extended from the equipment rack. The cables are

routed along the length of the bracket and held in place with Velcro® cable ties. The CMA is a

component added to the VMA-series chassis rack-mount option. The CMA is installed at the rear of

the chassis.

NOTE: The CMA is installed prior to shipping.

This document describes how to install the cable management brackets needed to clip on the Cable

Management Arm (CMA).

Before you start

Kit contents

VMA Bracket Kit Contents

1. Bracket, CMA Rail Mount (1)

2. Bracket, CMA Chassis Mount (1)

3. Mechanical screws (4)

4. Velcro fasteners (6)

Installing the cable management brackets 3

Part numbers and Descriptions

A0R63-2103A HP VMA Accessory Kit

675882-001 Carton, VMA accessoryQuantity: 1

5992-1074 RTF DocQuantity: 1

595851-002 CMAQuantity: 1

A0R63-2101A Bracket Kit (see image, above)Quantity: 1

Item 1in image, aboveA0R63-0002A Bracket CMA Rail MountQuantity: 1

Item 2in image, aboveA0R63-0001A Bracket CMA Chassis MountQuantity: 1

Item 3in image, above2200-1287 screw-mech 4-40 .312 _in _lgQuantity: 4

Item 4in image, above5021-1125 Fastener, Velcro H&L 0.50"x9"Quantity: 6

660723-001 Rack, HDWR Set, 10KG3 Reference Part onlyQuantity: 1

Required tools

•T-15 head torque screw driver

•Phillips screw driver

Installing the cable management bracket to the chassis

Orient the cable management brackets so the mounting brackets are on the right, as shown below.

1. To attach the cable management bracket (AOR63-0001A) to the chassis side, use a T-15 head

torque screw driver.

4 Installing the cable management bracket to the chassis

2. Using the built-in captive screws, torque to 4.7 in-lb (standard for an M3 screw, as shown in

Table 1).

Table 1 Torque specifications

MAXIMUM & MINIMUM TORQUE SPECIFICATIONS FOR ENGLISH AND METRIC SCREWS

Maximum TorqueMinimum TorqueMetric ThreadEnglish Thread

N-min-lbN-min-lbMajor Dia.SizeMajor Dia.Size

0.252.20.171.50.079”M 2.086”2-56

0.534.70.373.30.118”M 3.112”4-40

0.988.70.696.10.138”M 3.5.138”6-32

2.0117.81.51130.157”M 4.1648-32

4.4034.03.6027.00.197”M 5.190”10-32

7.35656.2255.00.236”M 6.250”1/4-20

Installing the cable management bracket to the rails

1. To attach the rails-side cable management bracket (A0R63-0002A) to the right side of the rails,

use the four (4-40) screws.

2. Use the Phillips head screw driver to torque to 4.7 in-lb (see Table 1).

Note the right side is facing the rear of the chassis.

Installing the cable management bracket to the rails 5

Sliding the Cable Management Arm into the bracket ends

Install the cable management arm by pulling the spring loaded plunger and sliding the ends of the

cable management arms into both brackets.

Installing cables

TIP: The manufacturer recommends installing cables in the following order:

1. Power cables

2. PCIe cables

3. LAN cables

Position the cables on management arms securely.

6 Sliding the Cable Management Arm into the bracket ends

Securing the CMA to the rack

Use Velcro® straps 5021-1125 to secure cables to the CMA.

IMPORTANT: You must attach three Velcro® straps to each CMA to assure stability during shipment

or transportation

1. Remove three Velcro® straps from the rack accessory package and remove the plastic mount, as

shown:

2. Insert straps in the left rear side panel and orientate the harnesses as shown in the image below,

left.

Securing the CMA to the rack 7

3. Adjust and tighten the straps until the CMA is horizontal. See image below, right.

NOTE: Tighten the straps enough to prevent interference with movement or pinched cables, and

to assure free movement of the CMA assembly.

8 Securing the CMA to the rack

*A0R63-9002A*

Printed in the US

Other manuals for VMA Series

1

Table of contents

Other HP Network Hardware manuals

HP

HP A3550A - High Availability Disk Arrays Model 20 Storage... User manual

HP

HP X1800sb G2 User instructions

HP

HP UPS Network Module User manual

HP

HP StorageWorks x9300 Service manual

HP

HP J9666A User manual

HP

HP StoreEasy 3000 Instruction Manual

HP

HP StorageWorks X9720 Service manual

HP

HP X5000 G2 Service manual

HP

HP XP 9000 User manual

HP

HP FlexNetwork 6616 User manual

HP

HP iSCSI User manual

HP

HP HP 16500 Installation and maintenance instructions

HP

HP ProCurve Radio Port 230 Assembly instructions

HP

HP HSR6602-G Installation instructions

HP

HP 12500 Series User manual

HP

HP 30020B Manual

HP

HP E1459A User manual

HP

HP 205H-MNT2 User manual

HP

HP Aruba EdgeConnect Extra-Small Chassis User manual

HP

HP ProCurve Networking J8451A User manual

HP

HP AHA-8940 User manual

HP

HP 634041-006 Quick reference guide

HP

HP Ethernet Network Interface Card hn230e User manual

HP

HP StorageWorks AB466A User manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide