HP ZX2000 User manual
Quick Installation Guide
HP Remote 3D Graphics Software
Quick Installation Guide
HP Remote 3D Graphics Software
Document Part Number: 5969-3194
January 2004
Installation Guide www.hp.com 1
This document provides a quick overview of installing both the
Receiver and Sender components of the HP Remote 3D Graphics
Software on your hp workstation. For detailed instructions,
please refer to the online documentation that is located on the
enclosed CD at /cdrom/pdf/R3DusersManual.pdf or
/cdrom/html/index.html for web based help.
Installing the HP Remote 3D
Receiver
Installation of the HP Remote 3D Receiver is required on all
systems that will be connecting to an HP Remote 3D Sender.
Microsoft® Windows®
This procedure must be executed from an account that has
administrator priviledges.
To install the HP Remote 3D Receiver on Microsoft Windows:
1. Insert the HP Remote 3D Graphics Software CD.
2. Select: R3D_receiver_win_ia32_1.0.exe
3. Follow the directions on the screen.
2 www.hp.com Installation Guide
HP-UX
This procedure must be executed from an account with root
priviledges.
To install the HP Remote 3D Receiver on HP-UX:
1. Insert and mount the HP Remote 3D Graphics Software CD.
2. Depending on the processor architecture execute:
a. For HP-UX PA-RISC execute:
R3D_receiver_hpux_pa_1.0
b. For HP-UX Itanium2 execute:
R3D_receiver_hpux_ipf_1.0
3. Follow the directions on the screen
Linux
This procedure must be executed from an account with root
priviledges.
To install the HP Remote 3D Receiver on Linux:
1. Insert and mount the HP Remote 3D Graphics Software CD.
2. Execute: R3D_receiver_linux_ia32_1.0
3. Follow the directions on the screen.
Installation Guide www.hp.com 3
Installing the HP Remote 3D
Sender
Installation of the HP Remote 3D Sender is required on all
systems that may be connected to by an HP Remote 3D Receiver.
Microsoft Windows
Consult the on-line documentation to see how to install an open
source VNC server that the HP Remote 3D Receivers can
connect to.
HP-UX
This procedure must be executed from an account with root
priviledges and will require a system reboot.
Before installing the HP Remote 3D Sender, the system must
have the required pre-requisite X Server patches installed. If you
do not have the following patches installed, they are available
from www.hp.com/go/bizsupport.
■HP-UX 11.0 OS PHSS_26637 - X Server
PHSS_22627 thru 638 - 3D libraries
4 www.hp.com Installation Guide
■HP-UX 11.11 PHSS_26638 - X Server
PHSS_22627-638 - 3D libraries
■HP-UX 11.22 PHSS_26625 - X Server
PHSS_22627-638 - 3D libraries
Once the patches (or newer versions) are installed, install the HP
Remote 3D Sender on HP-UX as follows:
1. Insert and mount the HP Remote 3D Graphics Software CD.
2. Execute: R3D_sender_hpux_pa_1.0
3. Follow the directions on the screen.
Linux
This procedure must be executed from an account with root
priviledges and will require a system reboot.
To install the HP Remote 3D sender on Linux:
NOTE: HP Remote 3D and HP VISUALIZE
CONFERENCE are incompatible—they cannot both
be installed on an HP Remote 3D Sender. The solution
is to un-install HP VISUALIZE CONFERENCE..
Installation Guide www.hp.com 5
1. Insert and mount the HP Remote 3D Graphics Software CD,
2. Depending on the processor architecure execute:
a. For Linux IA-32 execute:
R3D_sender_linux_ia32_1.0
b. For Linux Itanium2 execute:
R3D_sender_ipf_ia32_1.0
3. Follow the directions on the screen.
4. Configure the XF86Config file as follows:
a. Edit the file /etc/X11/XF86Config-4 (for a system with
an Nvidia Quadro 4 graphics card).
b. Locate the Section "Module" string.
c. Add " Load "hwvnc" " to this section.
Create an HP Remote 3D Sender
Password
After the installation of the HP Remote 3D Sender, a system
wide password must be set to allow the HP Remote 3D Receivers
to connect to the Sender.
6 www.hp.com Installation Guide
To create a password:
1. Login as root.
2. Change directory to: /opt/Remote3D/bin
3. Run the R3Dpasswd program.
4. Enter your password.
5. Your HP Remote 3D Sender is now setup and running.
Technical Support
HP provides technical support for software up to 90 days from
date of purchase. The HP Remote 3D software is supported only
on the hp workstation.
To contact technical support, you may call 1-800-HPINVENT in
the USA and Canada. For all other countries, please visit
www.hp.com and select "Contact HP" for a listing of technical
support phone numbers for your country or region.
For online access to general technical support information and
tools, go to www.hp.com/go/bizsupport. Support resources
include web-based troubleshooting tools, technical knowledge
databases, driver and patch downloads, online communities, and
proactive notification services.
Installation Guide www.hp.com 7
s
Other manuals for ZX2000
12
This manual suits for next models
4
Table of contents
Other HP Desktop manuals
HP
HP XM600 - Kayak - 128 MB RAM Product manual
HP
HP XM600 - Kayak - 128 MB RAM User manual
HP
HP Media Center Specification sheet
HP
HP Pavilion v400 - Desktop PC User manual
HP
HP TouchSmart 310-1000 - Desktop PC Quick guide
HP
HP DV3 Manual
HP
HP Z230 SFF Workstation User manual
HP
HP Pro 2000 - Microtower PC Manual
HP
HP XM600 - Kayak - 128 MB RAM User manual
HP
HP Compaq 500B Microtower Installation guide
HP
HP Xw8200 - Workstation - 1 GB RAM Quick reference guide
HP
HP ProDesk 680 G6 PCI Installation instructions
HP
HP G5 Manual
HP
HP Pavilion a1000 - Desktop PC User manual
HP
HP dx5150 Setup guide
HP
HP Spectre x360 Convertible Manual
HP
HP Bc1500 - BladeSystem - Blade PC User instructions
HP
HP Pro 3010 - Microtower PC Setup guide
HP
HP ENVY 23-c000 User manual
HP
HP DC7600 - HP User manual
