HP ProOne 600 G3 Installation instructions

EL-MF877-00 Page 1

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Product End-of-Life Disassembly Instructions

Product Category: Personal Computers

Marketing Name / Model

[List multiple models if applicable.]

HP ProOne 600 G3 Non-Touch All-in-One Business PC

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description

Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA)

With a surface greater than 10 sq cm

Batteries

All types including standard alkaline and lithium coin

or button style batteries

Mercury-containing components

For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm

Includes background illuminated displays with gas

discharge lamps

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

weighing > 25 grams (not including PCBs or PCAs

already listed as a separate item above)

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent

chambers, and service stations.

Components and waste containing asbestos

Components, parts and materials containing

EL-MF877-00 Page 2

Template Revision B

PSG instructions for this template are available at EL-MF877-01

refractory ceramic fibers

Components, parts and materials containing

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Electric screwdriver (Torx)

T15, Torx

Electric screwdriver (Cross)

#0, Cross

Plastic stick

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Follow steps described in Disassembly instruction (file attached)

2. If parts can be removed without using a tool, remove it first

3. Use correct screwdriver and torque value before unlock the screw.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

MANUFACTURING PROCESS INSTRUCTIONS

MECHANICAL ASSEMBLY

MODEL : Pegasus600

1.00

Station Version Station Version Station Version Station Version Station Version Station Version

11.00 91.00 17 1.00 25 1.00

2 1.00 10 1.00 18 1.00 26 1.00

3 1.00 11 1.00 19 1.00 27 1.00

4 1.00 12 1.00 20 1.00

5 1.00 13 1.00 21 1.00

6 1.00 14 1.00 22 1.00

7 1.00 15 1.00 23 1.00

8 1.00 16 1.00 24 1.00

Station

Ver.

ALL 1.**

2017/5/23

Date

Content

Date:

Porter Zan

First version

2017/5/23

A.Current station version list:

B.Version Modify list:

Sub-assembly name:

Pegasus600 DISASS'Y SOP

Document No.:

Pegasus600 DISASS'Y SOP

Page:

Design

Revision:

Written by:

Ethan Lai

1 of 1

Auditor ：Xin-Xin Chen

Tabulator：

Ethan Lai

Standard Operation Procedure

Tabulator：Issue Department：

Xin-Xin Chen NPSU-PPE

Auditor ：Ethan Lai

Steps：

Document No. : Pegasus600 DISASS’Y SOP Station :

Operation Name : Ver. : Date :

Note: If finding anything uncommon, notice foreman or assistant at once.

Fixture list (Specification) Qty. Fixture list (Specification) Qty.

Remove Stand

1. Take out Stand and put into the material box

(Fig. 1, 2).

Follow the steps as Fig. 1 & 2, push the

black button, then pull up Stand.

Glove Requirements: Half-fingered gloves

Fig. 1

Fig. 2

1(1/1)

2017/5/23

1.00

Push the black button

Pull up Stand

Standard Operation Procedure

Tabulator：Issue Department：

Xin-Xin Chen NPSU-PPE

Auditor ：Ethan Lai

Steps：

Document No. : Pegasus600 DISASS’Y SOP Station :

Operation Name : Ver. : Date :

Note: If finding anything uncommon, notice foreman or assistant at once.

Fixture list (Specification) Qty. Fixture list (Specification) Qty.

Take out Rear Cover

1. Follow the direction of red arrow to push

Rear Cover (Fig. 1).

2. Follow the sequence to pull open Rear Cover

and take it out. (Fig. 1).

Operating sequence: Bottom side → Left

side → Right side.

Glove Requirements: Half-fingered gloves

2(1/1)

2017/5/23

1.00

Fig. 1

Right side

Bottom side

Left side

Standard Operation Procedure

Tabulator：Issue Department：

Xin-Xin Chen NPSU-PPE

Auditor ：Ethan Lai

Steps：

Document No. : Pegasus600 DISASS’Y SOP Station :

Operation Name : Ver. : Date :

Note: If finding anything uncommon, notice foreman or assistant at once.

Fixture list (Specification) Qty. Fixture list (Specification) Qty.

3(1/1)

2017/5/23

1.00

Glove Requirements: Half-fingered gloves

Take out M/B shielding

Fig. 1

1. Take out M/B shielding (Fig. 1).

Follow the direction of red arrow to pull open

the spring, then pull up obliquely to take out

the shielding along the direction of upper left

corner.

Notice the hooks in red box in Fig. 1.

Obliquely take

out the shielding

along the

direction of

upper left corner

Pull open

the spring

Standard Operation Procedure

Tabulator：Issue Department：

Xin-Xin Chen NPSU-PPE

Auditor ：Ethan Lai

Steps：

Document No. : Pegasus600 DISASS’Y SOP Station :

Operation Name : Ver. : Date :

Note: If finding anything uncommon, notice foreman or assistant at once.

Fixture list (Specification) Qty. Fixture list (Specification) Qty.

4(1/1)

2017/5/23

1.00

Glove Requirements: Half-fingered gloves

Electric Screwdriver (S-6000MS) 1

Bits Type: T15,φ=5mm,L=60mm 1

Take out Thermal Module

Fig. 1

1. Unscrew (Torx Pin-Head ×5) all joints to

take out Thermal Module (Fig. 1).

Torsion: 4.0 ±1.0 kgf.cm

Take the screwdriver vertically to the screw

holes.

2. Put Thermal Module into the material box.

Standard Operation Procedure

Tabulator：Issue Department：

Xin-Xin Chen NPSU-PPE

Auditor ：Ethan Lai

Steps：

Document No. : Pegasus600 DISASS’Y SOP Station :

Operation Name : Ver. : Date :

Note: If finding anything uncommon, notice foreman or assistant at once.

Fixture list (Specification) Qty. Fixture list (Specification) Qty.

Take out HDD and ODD

5(1/1)

2017/5/23

1.00

Glove Requirements: Half-finger gloves

1. Take out HDD (Fig. 1).

Pull open the HDD bracket softly to the right,

and push upward HDD to disconnect, then

put it into the material box.

2. Take out ODD (Fig. 2).

Press the latch and push ODD to the left

simultaneously to disconnect, then put ODD

into the material box.

Fig. 1

Fig. 2

Push

Standard Operation Procedure

Tabulator：Issue Department：

Xin-Xin Chen NPSU-PPE

Auditor ：Ethan Lai

Steps：

Document No. : Pegasus600 DISASS’Y SOP Station :

Operation Name : Ver. : Date :

Note: If finding anything uncommon, notice foreman or assistant at once.

Fixture list (Specification) Qty. Fixture list (Specification) Qty.

6(1/1)

2017/5/23

1.00

Glove Requirements: Half-fingered gloves

Electric Screwdriver (S-3000MS) 1

Bits Type: #0,φ=5mm,L=60mm 1

Take out I/O board

Fig. 2

1. Unscrew (×2) all joints to take out I/O board

and disconnect I/O cable (Fig. 1, 2).

Torsion: 4.0 ±1.0 kgf.cm

Take the screwdriver vertically to the screw

holes.

Put I/O board and two screws into the

material box.

Switch can’t fall off.

2. Be careful not to make the pin heads of the

I/O connector are crooked (Fig. 3).

Pull out the I/O cable vertically from the top

of the I/O connector.



Fig. 1

Fig. 3

Switch

Follow the

routing to pull

out I/O cable

Standard Operation Procedure

Tabulator：Issue Department：

Xin-Xin Chen NPSU-PPE

Auditor ：Ethan Lai

Steps：

Document No. : Pegasus600 DISASS’Y SOP Station :

Operation Name : Ver. : Date :

Note: If finding anything uncommon, notice foreman or assistant at once.

Fixture list (Specification) Qty. Fixture list (Specification) Qty.

Take out DDR and CPU

7(1/1)

2017/5/23

1.00

Ion fan 1

Glove Requirements: Half-finger gloves

1. Take out DDR and put it into the material box

(Fig. 1).

Expand the springs on the both sides of the

DDR socket.

2. Take out CPU illustrated as Fig. 2, then put it

into the tray.

Don’t touch the pin heads of CPU.

Open the bracket by pulling off the link and

take out CPU.

Fig. 1

2. Open the bracket

by pulling off the link

1. Press the link and

push it to the right

Press the fixture, then

take out CPU vertically

CPU DISASS’Y steps:

Diagonally

consistent

Fig. 2

DDR

Other manuals for ProOne 600 G3

Other HP Desktop manuals

HP dx5150 User manual

HP OMEN 880 Installation instructions

HP Media Center,Pavilion Media Center m370 User manual

HP Compaq Presario Manual

HP Compaq dx6050 MT Operating and maintenance manual

HP Pavilion Slimline s3400f Instruction manual

HP Pavilion w1000 - Desktop PC User manual

HP Vectra VA 6 Series Product manual

HP VH677UA#ABA - Pavilion Dv6-1244sb... Installation instructions

HP E-PC C10 User manual

HP Spectre One 23-e000 User manual

HP EliteBook 8540W Installation guide

HP Computer Cards & Components / Motherboards User manual

HP Z800 - Workstation - 6 GB RAM User manual

HP TouchSmart IQ700 - Desktop PC User manual

HP Kayak XW U3-W3 Operating instructions

HP SignagePlayer mp8000r Setup guide

HP A6300f - Pavilion - 2 GB RAM Installation instructions

HP TouchSmart 310-1125 User manual

HP Compaq Presario Specification sheet

HP Compaq Presario Installation instructions

HP Compaq Presario Quick start guide

HP Media Center User manual

HP EliteDesk 705 G3 Operating and maintenance manual

Popular Desktop manuals by other brands

Asus

Asus E210 Series user guide

Dell

Dell Inspiron 600m quick start

Dell

Dell Inspiron 3662 Service manual

TotalFlow

TotalFlow uFLO user manual

Logitech

Logitech MK320 quick start guide

Dell

Dell XPS 730 H2C Service manual

Sony

Sony Vaio Series operating instructions

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer quick start

Alto

Alto MD 250 instruction manual

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series user manual

Sony

Sony VAIO VGX-TP1 Series user guide

Asus

Asus Eee Box B204 user manual

Dell

Dell Optiplex 9010 All In One owner's manual

Everex

Everex eXplora user manual

Lenovo

Lenovo ThinkCentre M75e user guide

Dell

Dell Alienware Area-51 R4 Service manual