HP Dx7400 - Microtower PC User manual

Computer Setup (F10) Utility Guide

HP Compaq dx7400 Series

Development Company, L.P. The

information contained herein is subject to

change without notice.

Microsoft, Windows, and Windows Vista are

either trademarks or registered trademarks

of Microsoft Corporation in the United States

and/or other countries.

The only warranties for HP products and

services are set forth in the express warranty

statements accompanying such products

and services. Nothing herein should be

construed as constituting an additional

warranty. HP shall not be liable for technical

or editorial errors or omissions contained

herein.

This document contains proprietary

information that is protected by copyright. No

part of this document may be photocopied,

reproduced, or translated to another

language without the prior written consent of

Hewlett-Packard Company.

Computer Setup (F10) Utility Guide

HP Compaq dx7400 Series

First Edition (July 2007)

Document Part Number: 448658-001

About This Book

This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and

modify computer default settings when new hardware is installed and for maintenance purposes.

WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily

harm or loss of life.

CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage

to equipment or loss of information.

NOTE: Text set off in this manner provides important supplemental information.

ENWW iii

iv About This Book ENWW

Table of contents

1 Computer Setup (F10) Utilities

Using Computer Setup (F10) Utilities ................................................................................................... 1

Computer Setup—System Information ................................................................................................. 3

Computer Setup—Main ........................................................................................................................ 4

Computer Setup—Advanced ................................................................................................................ 6

Computer Setup—Boot ........................................................................................................................ 8

Computer Setup—PC Health ............................................................................................................... 9

Computer Setup—Exit ........................................................................................................................ 10

2 Recovering the Configuration Settings

Backing Up the CMOS ....................................................................................................................... 12

Restoring the CMOS .......................................................................................................................... 13

ENWW v

vi ENWW

1 Computer Setup (F10) Utilities

Use Computer Setup (F10) Utility to do the following:

●Change factory default settings.

●Set the system date and time.

●Set, view, change, or verify the system configuration, including settings for processor, graphics,

memory, audio, storage, communications, and input devices.

●Modify the boot order of bootable devices such as hard drives, diskette drives, optical drives, or

USB flash media devices.

●Restrict a device from booting the unit.

●Run hard drive self-tests.

●View CPU and system temperatures.

●Enter the Asset Tag or property identification number assigned by the company to this computer.

●Establish a supervisor password that controls access to Computer Setup (F10) Utility and the

settings described in this section.

●Secure integrated I/O functionality, including the serial, USB, or parallel ports, audio, or embedded

NIC, so that they cannot be used until they are unsecured.

●Enable or disable removable media boot ability.

●Enable or disable legacy diskette write ability (when supported by hardware).

Using Computer Setup (F10) Utilities

Computer Setup can be accessed only by turning the computer on or restarting the system. To access

the Computer Setup Utilities menu, complete the following steps:

1. Turn on or restart the computer.

2. As soon as the computer is turned on, press F10 when the monitor light turns green to enter

Computer Setup. Press Enter to bypass the title screen, if necessary.

NOTE: If you do not press F10 at the appropriate time, you must restart the computer and again

press F10 when the monitor light turns green to access the utility.

3. The Computer Setup Utility screen is divided into menu headings and actions.

Six menu headings appear on the Computer Setup Utility screen:

●System Information

●Main

ENWW Using Computer Setup (F10) Utilities 1

●Advanced

●Boot

●PC Health

●Exit

Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and

down) keys to select the option you want, then press Enter. To return to the previous screen, press

Esc.

4. To apply and save changes, press the F10 key.

If you have made changes that you do not want applied, press the F9 key to exit without saving.

To load optimized default values, press the F7 key.

CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10)

changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting

the F10 Setup screen.

Table 1-1 Computer Setup (F10) Utility Main Menu

Heading Table

System Information Table 1-2 Computer Setup—System Information on page 3

Main Table 1-3 Computer Setup—Main on page 4

Advanced Table 1-4 Computer Setup—Advanced on page 6

Boot Table 1-5 Computer Setup—Boot on page 8

PC Health Table 1-6 Computer Setup—PC Health on page 9

Exit Computer Setup—Exit on page 10

2 Chapter 1 Computer Setup (F10) Utilities ENWW

Computer Setup—System Information

NOTE: Support for specific Computer Setup options may vary depending on the hardware

configuration.

Table 1-2 Computer Setup—System Information

Option Description

Product Name (view only)

SKU Number (view only)

Processor Type (view only)

Processor Speed (view only)

System ROM (view only)

Cache Size (view only)

Memory Size (view only)

Integrated MAC (view only)

UUID (view only)

System Serial # (view only)

Asset Tracking

Number

(view only)

ENWW Computer Setup—System Information 3

Computer Setup—Main

NOTE: Support for specific Computer Setup options may vary depending on the hardware

configuration.

Table 1-3 Computer Setup—Main

Option Description

Date (mm:dd:yy) Allows you to set system date.

Time (hh:mm:ss) Allows you to set system time.

SATA Port 1

SATA Port 2

SATA Port 3

SATA Port 4

For each, allows you to:

●run HDD self-test for selected channel:

◦SMART Status Check

◦HDD Short Self-Test

◦HDD Extended Self-Test

●auto-detect HDD size and head

●set IDE drive on selected channel to:

◦None

◦Auto

●set access mode on selected channel to:

◦Large

◦Auto

●view:

◦Firmware

◦Capacity

◦Cylinder

◦Head

◦Precomp

◦Landing Zone

◦Sector

Onboard FDC Controller Disables/enables the floppy disk controller.

Drive A Allows you to set Drive A to:

●None

●1.44M, 3.5 in.

4 Chapter 1 Computer Setup (F10) Utilities ENWW

Other manuals for dx7400 - Microtower PC

This manual suits for next models

Table of contents

Other HP Desktop manuals

HP ProDesk 600 G3 Small Form Factor Business Installation instructions

HP ENVY x360 13 Manual

HP Pro 3010 - Microtower PC User manual

HP Dx9000 - TouchSmart - 4 GB RAM User manual

HP 27-B110 User manual

HP Compaq 6000 User manual

HP Xw8400 - Workstation - 4 GB RAM User manual

HP Compaq Presario Installation instructions

HP Z800 - Workstation - 6 GB RAM User manual

HP sv6 User manual

HP Media Center m7000 - Desktop PC Specification sheet

HP Compaq Presario User manual

HP A320m - Pavilion - 256 MB RAM Installation instructions

HP EliteDesk 800 G1 Desktop Mini Operating and maintenance manual

HP Media Center m1000 - Desktop PC Specification sheet

HP Compaq 6005 Pro MT User manual

HP dx2355 - Microtower PC Operating and maintenance manual

HP Z600 - Workstation - 6 GB RAM Reference guide

HP Vectra VEi 8 Product manual

HP Compaq NX6130 Manual

HP Compaq SP750 User manual

HP EliteDesk 800 G3 Manual

HP Pavilion k200 - Desktop PC Installation instructions

HP SignagePlayer mp8000r Setup guide

Popular Desktop manuals by other brands

Asus

Asus E210 Series user guide

Dell

Dell Inspiron 600m quick start

Dell

Dell Inspiron 3662 Service manual

TotalFlow

TotalFlow uFLO user manual

Logitech

Logitech MK320 quick start guide

Dell

Dell XPS 730 H2C Service manual

Sony

Sony Vaio Series operating instructions

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer quick start

Alto

Alto MD 250 instruction manual

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series user manual

Sony

Sony VAIO VGX-TP1 Series user guide

Asus

Asus Eee Box B204 user manual

Dell

Dell Optiplex 9010 All In One owner's manual

Everex

Everex eXplora user manual

Lenovo

Lenovo ThinkCentre M75e user guide

Dell

Dell Alienware Area-51 R4 Service manual

HP dx7400 - Microtower PC User manual

Popular Desktop manuals by other brands