Honeywell XP 1991i User manual

Granit™ XP 1991i

Cordless Industrial Area-Imaging Scanner

Quick Start Guide

1991-EN-QS-01 Rev (a)

12/19

Agency Model: 1991iSR and 1991iMR+

Note: Refer to your User Guide for information about cleaning

your device.

Getting Started

Turn off computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

When the base is connected and powered up, put the scanner in

the base to establish a link. The green LED on the base flashes

to indicate the scanner’s battery or charge pack is charging.

Power Supply Assembly (if included)

Note: The power supply must be ordered separately, if needed.

Connecting the Base

USB:

Note: If you are charging the scanner using the USB cable, the

current available for charging is reduced and charge times

are increased. Charging via the power supply is faster.

Keyboard Wedge:

RS232 Serial Port:

Reading Techniques

The view finder projects an aiming beam

that should be centered over the bar code,

but it can be positioned in any direction for

a good read.

Note: If the scanner beeps 3 times when

scanning a bar code, the link has not

been established. If the scanner

beeps once, the link has been

established.

Standard Product Defaults

The following bar code resets all standard product default set-

tings.

Standard Product Defaults

USB Serial

Scan the following code to program the scanner to emulate a

regular RS232-based COM Port. Apple® Macintosh computers

recognize the scanner as a USB CDC class device and automati-

cally use a class driver.

Note: No extra configuration (e.g., baud rate) is necessary.

USB PC Keyboard

Scan the following code to program the scanner for a USB PC

Keyboard.

If you are using a Microsoft® Windows® PC, you must

download a driver from the Honeywell website. The

driver will use the next available COM Port number.

USB Serial

USB PC Keyboard

Keyboard Country

Scan the appropriate country code below to program the key-

board layout for your country or language. By default, national

character replacements are used for the following characters:

#$@[\]^‘{|}~ Refer to the ISO 646 Character Replacements chart

in your User Guide to view the character replacements for each

country.

USA (Default)

Belgium

Denmark

Finland

France

Germany/Austria

Note: For a complete list of country codes, see the User Guide for

your product.

Locked Link

If you link a scanner to a base using the Locked Link Mode,

other scanners are blocked from being linked if they are inad-

vertently placed into the base. If you do place a different scan-

ner into the base, it will charge the scanner, but the scanner will

not be linked.

Great Britain

Italy

Norway

Spain

Switzerland

Locked Link Mode

(Single Scanner)

To use a different scanner, you need to unlink the original scan-

ner by scanning the Unlink Scanner bar code.

Override Locked Scanner

If you need to replace a broken or lost scanner that is linked to a

base, scan the Override Locked Scanner bar code with a new

scanner, and place that scanner in the base. The locked link will

be overridden; the broken or lost scanner’s link with the base will

be removed, and the new scanner will be linked.

Unlinking the Scanner

If the base has a scanner linked to it, that scanner must be

unlinked before a new scanner can be linked. Once the previous

scanner is unlinked, it will no longer communicate with the

base. Scan the Unlink Scanner bar code to unlink a scanner.

Override Locked Scanner

Unlink Scanner

Other manuals for XP 1991i

Table of contents

Other Honeywell Scanner manuals

Honeywell

Honeywell 4800dr - Document Camera User manual

Honeywell

Honeywell 6300dpm User manual

Honeywell

Honeywell XENON 1902G-BF User manual

Honeywell

Honeywell Granit 1280i User manual

Honeywell

Honeywell Vuquest 3330g User manual

Honeywell

Honeywell Vuquest 3320g User manual

Honeywell

Honeywell QuantumT 3580 User manual

Honeywell

Honeywell SF61 User manual

Honeywell

Honeywell Granit 1280i User manual

Honeywell

Honeywell IS4920 User manual

Honeywell

Honeywell Xenon 1902h User manual

Honeywell

Honeywell Stratos MS2400 User manual

Honeywell

Honeywell 8680i Series User manual

Honeywell

Honeywell HF52X User manual

Honeywell

Honeywell VOYAGER 1250G User manual

Honeywell

Honeywell StratosH MS2321 User manual

Honeywell

Honeywell 4850DR User manual

Honeywell

Honeywell Voyager 1450g Series User manual

Honeywell

Honeywell Xenon 1902HC User manual

Honeywell

Honeywell Vuquest 3310g User manual

Honeywell

Honeywell Xenon 1500 User manual

Honeywell

Honeywell Voyager 147 Series User manual

Honeywell

Honeywell A700 User manual

Honeywell

Honeywell MS4980 User manual

Popular Scanner manuals by other brands

Plustek

Plustek Scanner user guide

Z/I Imaging

Z/I Imaging PhotoScan 2001 instructions

Renkforce

Renkforce DS100-5M operating instructions

Image Access

Image Access WideTEK A2 Operation manual

Canon

Canon imageFORMULA CR-120N user manual

Fujitsu

Fujitsu FI-4860C2 Specifications

GeoSlam

GeoSlam ZEB Horizon Hardware guide

Kodak

Kodak i5800 Scanner Brochure & specs

Kodak

Kodak i7300 user guide

Revopoint

Revopoint POP user manual

Fujitsu

Fujitsu fi-4860C installation guide

Eddyfi Technologies

Eddyfi Technologies Floormap X user manual

Faselase

Faselase F6 user manual

Fujitsu

Fujitsu CardMinder user guide

Uniden

Uniden BC340CRS owner's manual

Infinite Peripherals

Infinite Peripherals INFINEA TAB M user manual

Mustek

Mustek PageExpress 4800 Pro user guide

Optex

Optex 750830 owner's manual