Honeywell 8680i Series User manual

8680i

Wearable Scanner

Quick Start Guide

8680-EN-QS Rev (a)

3/18

Preliminary

Draft3/13/18

All manuals and user guides at all-guides.com

all-guides.com

Overview

Note: The battery must be fully charged before the first use. An

MB4-BAT-SCN02 or an MB4-SCN02 Charging Station

must be purchased separately.

Battery

Right button

Left button

Trigger Scanner

User window

Battery

latch

All manuals and user guides at all-guides.com

Attach the Scanner to Your Hand

1. Slide your fingers into the loosened strap.

2. Pull the strap to secure to your fingers.

All manuals and user guides at all-guides.com

Right or Left Handed Operation

To release the finger trigger, turn over the scanner. Slide the

latch toward the user window to release the finger trigger. Turn

the finger strap around and snap it into place to change the

operation to the correct hand.

All manuals and user guides at all-guides.com

Power Up the Scanner

Press the trigger for 10 seconds to power up the scanner. The

battery, WiFi, and Bluetooth status appears in the window.

Wrist Position When Scanning

How to Scan a Bar Code

The 8680i scanner has a view finder that projects a bright aimer

line. This aimer line should be centered over the bar code, but it

can be positioned in any direction for a good read.

Warning: Do not stare directly into the laser beam.

All manuals and user guides at all-guides.com

Linear bar codes 2D Matrix symbol s

The aimer line is smaller when the scanner is closer to the code

and larger when it is farther from the code. Symbologies with

smaller bars or elements (mil size) should be read closer to the

unit. Symbologies with larger bars or elements (mil size) should

be read farther from the unit. To read single or multiple symbols

(on a page or on an object), hold the scanner at an appropriate

distance from the target, press the trigger, and center the aimer

line on the symbol. If the code being scanned is highly reflective

(e.g., laminated), it may be necessary to tilt the code up 15° to

18° to prevent unwanted reflection.

All manuals and user guides at all-guides.com

all-guides.com

Connect the Scanner via Bluetooth

Pair with a Bluetooth Device Using a HID Keyboard

The 8680i scanner can pair with host Bluetooth devices such as

personal computers, laptops, and tablets. This is the default set-

ting for an 8680i scanner. Follow the steps below to establish

one-way communication with the host device.

1. Scan the appropriate Bluetooth HID Keyboard Connect bar

code below.

2. Set your host device so it searches for other Bluetooth

devices. (Refer to your host device’s User’s Guide for pairing

instructions.)

3. Once your host device has located the scanner, select the

8680i scanner name from the list displayed.

4. Some host devices automatically pair with the scanner. If

your host device automatically pairs with the scanner, it

displays a successful pairing message and you do not need

to continue to the next step.

* Bluetooth HID Keyboard

Connect

Bluetooth HID Japanese

Keyboard Connect

All manuals and user guides at all-guides.com

5. Some PDT hosts display a prompt for a PIN. Ignore this

message.

6. If your host device does not automatically pair with the

scanner, a PIN is displayed. This PIN must be scanned

within 60 seconds. Using the scanner, you must quickly

scan Bluetooth PIN Code below, then scan the numeric bar

code(s) for the PIN code from the chart below, then scan the

Save bar code.

Bluetooth PIN Code

All manuals and user guides at all-guides.com

The Bluetooth symbol appears in the scanner window when the

scanner pairs with a host.

Pair with an Android™ Device

The 8680i scanner can pair with Android devices.

1. Set your Android device so it searches for other Bluetooth

devices. (Refer to your Android device’s User’s Guide for

pairing instructions.)

2. Scan the BT Connection - Android Device bar code below.

Save

BT Connection - Android Device

All manuals and user guides at all-guides.com

On the Android device, the 8680i scanner is shown as a key-

board. Click on it to pair. The Bluetooth symbol appears in the

scanner window when the scanner pairs with a host.

Disconnect from the Host

Once your scanner has been connected to a host, you must dis-

connect it in order to communicate with a different device. Scan

the Bluetooth HID Keyboard Disconnect bar code to unlink the

scanner from the currently linked host.

Tap and Pair

You can pair your Android™ phone with the scanner by touching

the devices together.

1. Touch the Android phone to the scanner.

2. The phone recognizes the scanner and prompts you to pair.

3. Verify the pairing of the scanner in your phone’s Bluetooth

settings.

Pair with a Bluetooth Serial Port - PCs/Laptops

The 8680i scanner can pair with a Bluetooth serial port on a PC

or laptop. Scanning the Non-Base BT Connection bar code

below unlinks your scanner and puts it into a discoverable state.

Once the scanner searches for and connects with a Bluetooth

Bluetooth HID Keyboard Disconnect

All manuals and user guides at all-guides.com

Other manuals for 8680i Series

Table of contents

Other Honeywell Scanner manuals

Honeywell

Honeywell HH400 User manual

Honeywell

Honeywell HF680 User manual

Honeywell

Honeywell Granit 1910i User manual

Honeywell

Honeywell 1602-B User manual

Honeywell

Honeywell Granit 1280i User manual

Honeywell

Honeywell Stratos 2700 User manual

Honeywell

Honeywell Eclipse MS5100 Series User manual

Honeywell

Honeywell IS4920 User manual

Honeywell

Honeywell Xenon 1902HC User manual

Honeywell

Honeywell HF680 User manual

Honeywell

Honeywell Voyager 1400g Series User manual

Honeywell

Honeywell HF680 User manual

Honeywell

Honeywell Voyager 1452g Series User manual

Honeywell

Honeywell Voyager XP 1472g Series User manual

Honeywell

Honeywell Voyager 1450g Series User manual

Honeywell

Honeywell Vuquest 3330g User manual

Honeywell

Honeywell XENON 1900 User manual

Honeywell

Honeywell Voyager 1452g Series User manual

Honeywell

Honeywell HH480 User manual

Honeywell

Honeywell Xenon 1932 User manual

Honeywell

Honeywell Xenon 1500 User manual

Honeywell

Honeywell HF680 User manual

Honeywell

Honeywell Stratos MS2400 User manual

Honeywell

Honeywell OrbitCG MS7180 User manual

Popular Scanner manuals by other brands

Plustek

Plustek Scanner user guide

Z/I Imaging

Z/I Imaging PhotoScan 2001 instructions

Renkforce

Renkforce DS100-5M operating instructions

Image Access

Image Access WideTEK A2 Operation manual

Canon

Canon imageFORMULA CR-120N user manual

Fujitsu

Fujitsu FI-4860C2 Specifications

GeoSlam

GeoSlam ZEB Horizon Hardware guide

Kodak

Kodak i5800 Scanner Brochure & specs

Kodak

Kodak i7300 user guide

Revopoint

Revopoint POP user manual

Fujitsu

Fujitsu fi-4860C installation guide

Eddyfi Technologies

Eddyfi Technologies Floormap X user manual

Faselase

Faselase F6 user manual

Fujitsu

Fujitsu CardMinder user guide

Uniden

Uniden BC340CRS owner's manual

Infinite Peripherals

Infinite Peripherals INFINEA TAB M user manual

Mustek

Mustek PageExpress 4800 Pro user guide

Optex

Optex 750830 owner's manual