Honeywell Zio TR70 User manual

SPECIFICATION DATA

63-1322-01

Zio™LCD Wall Modules

TR70 AND TR70-H with Sylk™bus

GENERAL

The TR70 and TR70-H are 2-wire, non-polarity sensitive,

Sylk bus communicating wall modules for use with Spyder™

(PUL6438S, PVL6436AS, and PVL6438NS models only) and

ComfortPoint™ (CP-UL6438S, CP-VL6436AS, and

CP-VL6438NS models only) programmable controllers.

All models have a space-temperature sensor, network bus

jack, and an LCD panel with three softkeys and two Up/Down

adjustment keys. The TR70-H model includes an onboard

humidity sensor.

NOTE: Refer to the Zio™ LCD Wall Modules TR70 and

TR70-H with Sylk™ bus – Operating Guide (form

63-2667) for information about customizing the wall

module configuration, such as modifying the default

Home screens or creating your own application.

FEATURES

The TR70 and TR70-H wall modules include:

• Ability to control user access to controller parameters.

• Customized parameter access, by using the Tridium

Niagara Workbench tool.

• Programmable for: Home screen options, tenant

access, contractor access, access to controller

parameters, setpoint, override, fan, and other

parameters.

• Eight pre-programmed configurations (e.g. VAV with

balancing) in the wall module configuration tool.

• Ability to access and adjust most parameters in the

programmable controller (except Scheduling).

• Ability to balance the VAV system from the wall

module.

• Home screen can display one to three of any of the

following parameters: Temperature Setpoint, Room

Temperature, Room Humidity, Outdoor Humidity,

Outdoor Temperature, and Time, or one of virtually any

parameter in the controller.

• Network bus jack.

• Simple 2-wire terminal connection to the

programmable controller and an optional 2-wire

terminal connection for the network. All connections

are polarity insensitive.

• Retention of user configuration, including setpoints

after a power outage.

SPECIFICATIONS

Construction: Two-piece construction, cover and internally

wired subbase. Field wiring, 18 to 24 AWG (0.82 to 0.20

sq. mm), connects to a terminal block in the subbase.

Mounting Options: The LCD wall modules can be mounted

on a standard two by four inch junction box or on a 60 mm

diameter junction box. The modules may be mounted up to

200 ft. (61 m) from the programmable controller. Twisted

pair wiring is recommended for distances longer than 100

ft. (30.5 m).

Dimensions (H/W/D): See Fig. 2 on page 2.

Environmental Ratings:

Operating Temperature: 30°F to 110°F (-1°C to 43°C)

Shipping Temperature: -40°F to 150°F (-40°C to 65.5°C)

Relative Humidity: 5% to 95% non-condensing

Temperature Setpoint Range: Default range is 55°F to 85°F

(10°C to 35°C); configurable for other ranges.

Temperature Sensor Accuracy: ±0.36°F at 77°F (±0.2°C at

25°C)

ZIO™ LCD WALL MODULES

63-1322—01 2

Humidity Sensor Accuracy (TR70-H only): ±5% RH from

20% to 80% RH

Power: 18 Vdc power is supplied to the wall module from the

2-wire S-BUS connection to the programmable

controller.

Accessories: 50007298-001 (pack of 12) medium, cover

plate; 6-7/8 x 5 in. (175 x 127 mm).

Approvals:

CE; UL94-HB plastic enclosure; FCC Part 15,

Class B

Terminal Wiring Location

Fig. 1 illustrates the location of the terminal block and other

features on the TR70 and TR70-H wall modules.

Fig. 1. LCD wall module components (rear view of TR70).

NOTES:

1. 18 Vdc power for the LCD wall modules is sup-

plied from the programmable controller.

2. Each of the 2-wire connections for the network

bus and S-BUS are polarity insensitive.

Module Dimensions

Fig. 2. Wall module dimensions in inches (mm).

Communications

The wall modules use a sensor bus (S-BUS) for

communications with the programmable controller.

For network communication, the building’s LON network wires

connect to the two terminals (NET-1 and NET-2). See Fig. 1.

A network bus port is accessible at the bottom of the wall

module by removing the jack plug.

The network bus and S-BUS terminals (see Fig. 1) are

insensitive to polarity, minimizing installation errors due to

mis-wiring. The recommended wire size for the network bus

and S-BUS is Level IV, 22 AWG (0.33 sq. mm) plenum or non-

plenum rated, unshielded, twisted pair, solid conductor wire.

LCD Display

The LCD display may be customized for tenant and contractor

users. The following are a few samples of the various Home

screens that are configurable for the LCD Wall Modules. Not

all possible Home screens are illustrated here. There are

many other configurable Home screens.

NOTES:

1. Home screens can display one to three of any of

the following parameters: Temperature Setpoint,

Room Temperature, Room Humidity, Outdoor

Humidity, Outdoor Temperature, and Time, or one

of virtually any parameter in the controller.

2. Refer to the Zio™ LCD Wall Modules TR70 and

TR70-H with Sylk™ bus – Operating Guide (form

63-2667) for information about customizing the

wall module configuration, such as modifying the

default Home screens or creating your own appli-

cation.

M27349

SLOTS FOR SUBBASE

LOCKING TABS (X4)

01234

98765

WALL MODULE BUS

ADDRESS DIAL

(DEFAULT SETTING = 1)

S-BUS PROGRAMMABLE

CONTROLLER CONNECTION

NETWORK BUS

CONNECTION

EACH OF THE TWO WIRE CONNECTIONS FOR THE S-BUS AND NETWORK

BUS TERMINALS ARE POLARITY INSENSITIVE.

1 2 3 4

50028668-XXX

4321

S-BUS

NET-2

(optional)

NET-1

(optional)

TR70-H

YY WK

HONEYWELL

PATENT PENDING

GOLDEN VALLEY,MN

ASSEMBLED IN MEXICO

3 5/16 (84)

4 5/8

(117)

15/16

(24)

M27347

ZIO™ LCD WALL MODULES

363-1322—01

Sample Tenant LCD Displays

The Fan and Occupied settings are optional for Home screen

setup. If there are no parameters configured for Tenant

access, the “View More” softkey does not display on the

Tenant Home screen.

The following are a few samples of the various Home screens

that are configurable for the LCD Wall Modules. Not all

possible Home screens are illustrated here. There are many

other configurable Home screens.

Fig. 3. Sample Tenant Home screen with System Status,

Setpoint, Outside Temperature, and

Room Temperature (predominant).

Fig. 4. Sample Tenant Home screen with Room

Temperature and Time (predominant).

Fig. 5. Sample Tenant Home screen with

Setpoint display only.

Fig. 6. Sample Tenant “View More” display showing

CO2sensor value from controller.

NOTE: Any configured parameter may be displayed.

Sample Contractor LCD Displays

The Contactor mode allows advanced options using the

softkeys. Contractor mode also allows for customizing the

Tenant view, including setting the tenant’s Home screen and

“View More” access.

Fig. 7. Sample Contractor Home screen display with

System Status, Setpoint, Outside Temperature,

and Room Temperature (predominant).

CONTACTOR HOME SCREEN SOFTKEYS

The three softkeys on the Contractor Home screen (Fig. 7)

provide the following:

SET HOME SCREEN - allows the contractor to choose

among multiple Home screen options for the tenant.

SET VIEW MORE - allows the contractor to give additional

parameter access (view only or adjustable) to the tenant.

PARAMETERS - allows the contractor to monitor and/or

adjust parameters in the programmable controller.

M27354

M27379

M27377

M27356

M27357

ZIO™ LCD WALL MODULES

Automation and Control Solutions

Honeywell International Inc. Honeywell Limited-Honeywell Limitée

1985 Douglas Drive North 35 Dynamic Drive

Golden Valley, MN 55422 Toronto, Ontario M1V 4Z9

customer.honeywell.com

® U.S. Registered Trademark

63-1322—01 M.S. 10-08

Fig. 8. Sample Contractor parameter display showing

user-created discharge air parameter value.

Fig. 9. Sample Contractor parameter display showing

sensor setpoint value (CO2sensor from controller).

NOTE: Any configured parameter may be displayed.

TYPICAL SPECIFICATION

1. The wall module shall have an LCD display.

2. The wall module shall have a customizable home

screen:

a. Shall have the option to show up to 3 parameter

values on a single display.

b. Shall have the option to show occupied status.

c. Shall have the option to show system status.

d. Shall have the option to show fan status.

e. Shall have the option to show up to three of the

following parameters:

(a) room temperature, setpoint, outside tempera-

ture, room humidity, outside humidity, time of

day.

f. Shall have the option to show on the home screen

any single parameter in the controller, with a user

defined 8 letter name.

3. The wall module shall offer access to all parameters

necessary to balance a VAV system.

4. The wall module shall offer the ability to restrict access

to parameter information with keypad enabled lock out.

5. The wall module shall retain user configuration including

setpoints after power outage.

6. The wall module shall use a two wire polarity insensitive

connection for all communication and power needs.

7. The wall module shall offer the ability to access and

adjust user chosen controller parameters.

8. The wall module shall offer the ability for the tenant to

adjust override time period within the limits set by the

contractor.

9. The wall module shall offer a communication jack for

remote access to the network.

10. The wall module shall offer a ± 5% on board humidity

sensor (TR70-H only).

11. The wall module shall be configured through the Tridium

Niagara workbench tool.

12. The wall module shall communicate with other devices

using the Sylk bus protocol.

ComfortPoint™ is a trademark of Honeywell International Inc.

LONMARK® is a trademark of the LonMark Association.

Spyder™ is a trademark of Honeywell International Inc.

Sylk™ is a trademark of Honeywell International Inc.

Zio™ is a trademark of Honeywell International Inc.

M27358

M27359

Other manuals for Zio TR70

This manual suits for next models

Other Honeywell Controllers manuals

Honeywell

Honeywell M6410C/L Operation manual

Honeywell

Honeywell ML6185 User manual

Honeywell

Honeywell EXCEL 5000 OPEN ZAPP User manual

Honeywell

Honeywell VK41 V Series User manual

Honeywell

Honeywell LKS 310 Manual

Honeywell

Honeywell Aquastat L4006 User manual

Honeywell

Honeywell LT-32 User manual

Honeywell

Honeywell Ex-Or MLS2000DALIHBW Installation and operation manual

Honeywell

Honeywell 11280S User manual

Honeywell

Honeywell dcp100t User manual

Honeywell

Honeywell HPMOM6CB User manual

Honeywell

Honeywell Excel 15 W7760A User manual

Honeywell

Honeywell Touchpoint Plus Release Note

Honeywell

Honeywell Design and Application Product manual

Honeywell

Honeywell 6200 Series Instruction manual

Honeywell

Honeywell Excel 10 W7751H User manual

Honeywell

Honeywell ROBINEX M 100 User manual

Honeywell

Honeywell Air Alert 96d User manual

Honeywell

Honeywell MN6110 User manual

Honeywell

Honeywell EXCEL 10 W7753A User manual

Honeywell

Honeywell T775L Series User manual

Honeywell

Honeywell D6 PRO User manual

Honeywell

Honeywell CD3200 User manual

Honeywell

Honeywell HA40 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual