Honeywell MIWI350 User manual

• Internal or External Mounted Display

•Optional Backup Battery for Uninterrupted EVC Functionality

Solar Power with rechargeable Sealed Lead-Acid Battery (Refer to FD-612)

Battery - Alkaline Packs (Dual/Quad) (Refer to FD-613)

Modem Power Control through Power Distribution Board

Available in UMB (Universal Mounting Bracket), Wall, Pipe, and Portable mounting options

Compatible with MasterLink and PowerSpring software

CSA C/US Class 1, Division 2, Group C & D certiﬁcation

An integrated electronic cellular modem

Close the door of the MIWI350 device properly

Check the lock and latchet, and lock the MIWI350 device properly

Check the padlock properly while locking the MIWI350 device

Lock the battery mount bracket ﬂip cover properly after mounting the battery

MIWI350 complies with the general safety standards and regulations. However, failure to operate this

product as per the safety instructions available in this document may lead to hazards.

It is approved for use in hazardous areas Class I, Division 2. Different versions of MIWI350 are available

depending on the operating temperature conditions. The permitted operating conditions are marked on

each product. Check the operating condition limits of MIWI350 before installing. You must be familiar and

comply with the currently applicable electrical installation standards and regulations before installing and

operating MIWI350 in hazardous areas.

Denotes an explosion hazard. Ensure you follow all instructions described in the warning

notiﬁcation.

The caution warns you of possible damage to property and provides instructions to avoid

damage to MIWI350.

For more information on MIWI350 user manual, refer FD-610.

An integrated Electronic Volume Corrector or Electronic Recorder (using

electronics from the Honeywell EC350/ERX350)

The MIWI350 typically device includes:

The MIWI350 is the latest offering in the Honeywell's EVC Product Line. This

product line provides a more competitive, reliable, and easy to use solution.

It provides a comprehensive selection of communication hardware and power

supply systems optimized to integrate with the Mercury Instruments precision

measurement instrumentation. It also includes software for Remote Monitoring

and Data Acquisition (RMADA), including alarm handling and notiﬁcation.

•Pressure Expansion (PE) Board for Third Pressure, P3

Power or Communications Box (Refer to FD-614)

Install the MIWI350 device using

one of the following mounting

options:

Lead-Acid Battery Pack

Internal/External Display Cable gland location for

Pulse Output and

Pulse Input

Modem Pressure Transducers

P1, P2 and P3

Latch and Lock

Case Assembly

AC-DC Adaptor

Solar Charge ControllerDoor Assembly

Terminal block to connect to

external incoming power

P3 P2 P1

Pressure Expansion

(PE) Board

P1 Pressure

Transducer

Temperature

Probe

Ground/Earthing

Power Input

P2 Pressure

Transducer

Pulse Input

Pulse Output

P3 Pressure

Transducer

Lorem ipsum

After you receive the MIWI350 device:

Remove the contents from the box and the mounting kit bag.

2. Check the shipment against the invoice to ensure that the components ordered are installed in

MIWI350.

Report any shortage or shipping damages to your nearest Honeywell Account Manager.

Remote Antenna

(Optional)

Case Connector

(Optional)

Close the door of the device

properly. Also, check the

padlock, latchet and lock

the device.

Release the door latches of the

device one at a time, and open

the door of the device

Install the temperature probe to the

pipeline and tighten the nut to avoid

leakage (if applicable)

Route the external power cable*

through the gland and connect

to power terminal block

04 05

Route the pulse

input/output

cables through

the glands

(if applicable)

* It is required to use a UL/CSA approved cable

with working voltage spec of min 300V. Cable

shall be protected with an outer sheath.

For a fresh Lead-Acid Battery, the No Load Voltage is expected to be between 12.5–13.5VDC.

: Please perform the No Load Battery Voltage measurement in an area rendered Non Hazardous.

Please exercise caution to ensure the Battery Terminals do not come in contact with any other

metal objects during the measurement/handling.

Conﬁgure modem/EC/ERX350/HMI settings

(For more information, refer MIWI350 Installation and Operational Manual FD-610)

Quarter turn the screw and open

the battery mount bracket ﬂip

cover (CCW)

Insert the battery in the mount

bracket carefully

Connect the battery pack cable#

to battery charge controller cable Close the battery mount bracket ﬂip

cover and turn back the screw (CW)

# 40-6169-3 - If you are connecting a 12V 7Ah lead-acid battery

# 40-6169-2 - If you are connecting a 12V 21Ah lead-acid battery

CAUTION :

7 AH BATTERY WITH 120V AC/15V DC ADJUSTABLE POWER SUPPLY 21 AH BATTERY WITH 120V AC/15V DC ADJUSTABLE POWER SUPPLY

EXTERNAL DC POWER WITH BATTERY BACK UP EXTERNAL DC POWER WITHOUT BATTERY BACK UP

40-6186

40-6169-4

40-6169-2

40-2342-1

DISCONNECT THESE CONNECTORS BEFORE

CONNECTING FEMALE TERMINALS

(40-6192-3) TO BATTERY

40- 6169-3

40-2342-1

40-6186

40- 6169-4

40-6169-2

40-6163-2

FIX THE TERMINAL

BLOCK AT NEAR SIDE

OF ENCLOSURE

40-6163-2

40-6045

To learn more about

Honeywell’s Smart Gas Metering Solutions, visit:

FD-611 | Rev A | April 2020

www.honeywellprocess.com or contact your

Honeywell Process Solutions representative.

1280 Kemper Meadow Drive Cincinnati,

OH 45240

855-2511-7065 - United States & Canada

302-669-4253 - Outside the United States

MI-TAC-Support@Honeywell.com

Other manuals for MIWI350

Other Honeywell Controllers manuals

Honeywell

Honeywell ML6425B User manual

Honeywell

Honeywell HON 5020 Operating instructions

Honeywell

Honeywell epc T5068A User manual

Honeywell

Honeywell SUPER TRADELINE S8610U User manual

Honeywell

Honeywell WEB-700 User manual

Honeywell

Honeywell McDonald's HEMS II User manual

Honeywell

Honeywell THP9045A User manual

Honeywell

Honeywell T775R 2000 Series User manual

Honeywell

Honeywell V7335A 2000 Series User manual

Honeywell

Honeywell UDC1200 MICRO-PRO User manual

Honeywell

Honeywell TRADELINE SV9501 User manual

Honeywell

Honeywell Enraf User manual

Honeywell

Honeywell UDC3500 User manual

Honeywell

Honeywell ML4105 Operation manual

Honeywell

Honeywell VK41 R Series User manual

Honeywell

Honeywell HA40 User manual

Honeywell

Honeywell Vista Automation Module User manual

Honeywell

Honeywell Pressuretrol L404 Series User manual

Honeywell

Honeywell ESYS S4965A3025 Operating and installation instructions

Honeywell

Honeywell L7224A User manual

Honeywell

Honeywell ML6421A User manual

Honeywell

Honeywell ML7420A6025 User manual

Honeywell

Honeywell PRO 2000 Series User manual

Honeywell

Honeywell Lyric Operating instructions

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual