Honeywell T775M Owner's manual



To program the controller, perform the following procedures in the order listed:

 

Fig. 1

Press the MENU button, then select PROGRAM and press the button to view the

program menu.

Fig. 1 shows the Program menu for controller.





Fig. 2

1. From the menu, use the and buttons to highlight MOD 1.

2. Press the button to select MOD 1 to view the parameters. Fig. 2 shows

RELAY 1. In MOD 1, THROT RNG replaces DIFFERNTL.

  !"#

Fig. Program – Setpoint

1. From the menu, use the and buttons to highlight SETPOINT.



2. Press the button to display the setpoint value.



3. Use the and buttons to increase/decrease the desired setpoint

temperature.



Set the temperature to 55°F.

4. Press the button to accept the setpoint temperature and display the next

option.

  !"$%&'!"$&"$

Fig. Program – Throttling Range

1. From the menu, use the and buttons to highlight THROT RNG.

2. Press the button to display the throttling range value.

3. Use the and buttons to increase/decrease the desired value.

Set the value to 10°F.

4. Press the button to accept the value and display the next option.

 ( " &

Fig. Program – Sensor

1. From the menu, use the and buttons to highlight SENSOR.

2. Press the button to display the sensor selections.

3. Use the and buttons to select Sensor A or B.

Select sensor B.

4. Press the button to accept the highlighted sensor and display the next option.

 )%*'

Fig. Program Heat/Cool

1. From the menu, use the and buttons to highlight HEAT/COOL (Default:

HEAT).

2. Press the button to display the heat and cool selections.

3. Use the and buttons to select Heat or Cool.

Select COOL.

4. Press the button to accept the highlighted selection and display the next

option.



+

Press the button to accept the highlighted selection EXIT. This will display the main

Program Menu screen (Fig. 1)

 

Fig. 1

("+,#-

1. From the menu, use the and buttons to highlight MOD 2.

2. Press the button to select MOD 2 to view the parameters.



 ( !"#

Fig. Program - Setpoint

1. From the menu, use the and buttons to highlight SETPOINT.



2. Press the button to display the setpoint value.



3. Use the and buttons to increase/decrease the desired setpoint

temperature.



Set the temperature to 55°F.

4. Press the button to accept the setpoint temperature and display the next

option.





 ( !"$%&'!"$&"$

Fig. Program – Throttling Range

1. From the menu, use the and buttons to highlight THROT RNG.

2. Press the button to display the throttling range value.

3. Use the and buttons to increase/decrease the desired value.

Set the value to 10°F.

4. Press the button to accept the value and display the next option.

 (( " &

Fig. Program – Sensor

5. From the menu, use the and buttons to highlight SENSOR.

6. Press the button to display the sensor selections.

7. Use the and buttons to select Sensor A or B.

Select sensor A.

8. Press the button to accept the highlighted sensor and display the next option.





 ()%*'

Fig. Program Heat/Cool

5. From the menu, use the and buttons to highlight HEAT/COOL (Default:

HEAT).

6. Press the button to display the heat and cool selections.

7. Use the and buttons to select Heat or Cool.

Select HEAT.

8. Press the button to accept the highlighted selection and display the next

option.

_____________________________________________________________________

(+

Press the button to accept the highlighted selection EXIT. This will display the main

Program Menu screen (Fig. 1)

 

Fig. 1

)"+,&'.-

1. From the menu, use the and buttons to highlight RELAY 1.



Fig. 2

2. Press the button to select RELAY 1 to view the parameters.



) !"&'.

Fig. Program - Setpoint

1. From the menu, use the and buttons to highlight SETPOINT (Fig. 2).



2. Press the button to display the setpoint value.



3. Use the and buttons to increase/decrease the desired setpoint

temperature.



Set the temperature to 100°F.

4. Press the button to accept the setpoint temperature and display the next

option.

_____________________________________________________________________

 )#!&"!' !"$

Fig. Program – Differential

1. From the menu, use the and buttons to highlight DIFFERNTL.

2. Press the button to display the differential value.

3. Use the and buttons to increase/decrease the desired value.

Set the value to 10°F.

4. Press the button to accept the value and display the next option.





 )( " &

Fig. Program – Sensor

1. From the menu, use the and buttons to highlight SENSOR.

2. Press the button to display the sensor selections.

3. Use the and buttons to select Sensor A or B.

Select sensor A.

4. Press the button to accept the highlighted sensor and display the next option.

 ))%*'

Fig. Program Heat/Cool

1. From the menu, use the and buttons to highlight HEAT/COOL (Default:

HEAT).

2. Press the button to display the heat and cool selections.

3. Use the and buttons to select Heat or Cool.

Select HEAT.

4. Press the button to accept the highlighted selection and display the next

option.



 +

Fig. Program – Exit

Press the HOME button to leave programming mode and return to the home screen.

This completes the programming procedure.

Table of contents

Other Honeywell Controllers manuals

Honeywell

Honeywell Experion C300 User manual

Honeywell

Honeywell T775L Series User manual

Honeywell

Honeywell HCE80 Owner's manual

Honeywell

Honeywell DBC2000 Series User manual

Honeywell

Honeywell SUPER TRADELINE S8610U User manual

Honeywell

Honeywell ControLinks R7999A User manual

Honeywell

Honeywell Novar ES3.S Programming manual

Honeywell

Honeywell ML200 Series User manual

Honeywell

Honeywell CentraLine EAGLEHAWK NX User manual

Honeywell

Honeywell HR 80 User manual

Honeywell

Honeywell T775U Series User manual

Honeywell

Honeywell UDC1200 MICRO-PRO User guide

Honeywell

Honeywell UDC3500 User manual

Honeywell

Honeywell HON 670 Guide

Honeywell

Honeywell AQS51-KAM Operation manual

Honeywell

Honeywell UDC3500 User manual

Honeywell

Honeywell MS 10 Series User manual

Honeywell

Honeywell dcp100t User manual

Honeywell

Honeywell Pro-Watch 7000 User manual

Honeywell

Honeywell VB6 Series User manual

Honeywell

Honeywell CENTRA LINE MERLIN NX Series Installation and operation manual

Honeywell

Honeywell DCP 250 Installation guide

Honeywell

Honeywell HercuLine 10260A User manual

Honeywell

Honeywell HR 80 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual