Honeywell PRO22IC User manual

PRO-2200

Intelligent Controller

Installation Manual

Part Number: PRO22IC

TD1146 rev0501

PRO-2200 Intelligent Controller PRO22IC 3Installation Guide

Contents

Warnings and Cautions ........................................................................................ 4

Disclaimer........................................................................................................... 6

Unpacking Procedure ........................................................................................... 6

Shipping Instructions ............................................................................................ 7

Limited Warranty ................................................................................................. 7

Confidentiality ..................................................................................................... 8

Description .......................................................................................................... 9

Set Up ................................................................................................................ 9

LED Operation .................................................................................................. 10

Power................................................................................................................ 10

Communications ............................................................................................... 11

Alarm Inputs...................................................................................................... 12

Memory Backup Battery...................................................................................... 12

Mounting Options ............................................................................................. 12

Suggested Installation Sequence ......................................................................... 12

Specification Summary ....................................................................................... 13

Wiring Diagram ................................................................................................ 14

4 PRO-2200 Intelligent Controller PRO22ICInstallation Guide

Warnings and Cautions

WARNING

Before installation, TURN OFFthe external circuit breaker which supplies power to the

system.

Before connecting the device to the power supply, verify that the output voltage is within

specifications of the power supply.

Do not apply power to the system until after the installation has been completed.

Personal injury ordeathcouldoccur,andtheequipmentcould be damaged beyondrepair,

iftheseWARNINGSarenotobserved!

WARNING

Fire Safety and Liability Notice

Never connect card readers to any critical entry, exit door, barrier, elevator or gate without

providing an alternative exit in accordance with all fire and life safety codes pertinent to

the installation.These fire and safety codes vary from city to city and you must get

approval from local fire officials whenever using an electronic product to control a door or

other barrier.Use of egress buttons, for example, may be illegal in some cities.In most

applications, single action exit without prior knowledge of what to do is a life safety

requirement.Always make certain that any required approvals are obtained in writing.DO

NOT ACCEPTVERBAL APPROVALS,THEY ARE NOTVALID.

EngineeredSystemsneverrecommendsusing the PRO-2200 or relatedproductsforuse

as a primary warning or monitoring system. Primary warningormonitoring systemsshould

always meet local fire and safety code requirements.The installer must also test the

system on a regular basis by instructing the end user in appropriate daily testing proce-

dures.Failure to test a system regularly could make installer liable for damages to the end

user if a problem occurs.

WARNING

EARTH groundallenclosures,for proper installation.

WARNING

Use suppressors on all door strikes. Use S-4 suppressors for installation. Engineered

Systems Group recommends only DC strikes.

The information in this document is subject to change without notice.

PRO-2200 Intelligent Controller PRO22IC 5Installation Guide

CAUTION

IF ANY DAMAGETOTHE SHIPMENT IS NOTICED, A CLAIM MUST BE FILEDWITH

THE COMMERCIAL CARRIER RESPONSIBLE.

CAUTION

Electro-static discharge can damage CMOS integrated circuits and modules.

To prevent damage always follow these procedures:

Use static shield packaging and containers to transport all electronic components,

including completed reader assemblies.

Handle all ESD sensitive components at an approved static controlled workstation.These

workstations consist of a desk mat, floor mat and an ESD wrist strap.Workstations are

available from various vendors.

NOTICE

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules.These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment.This equipment generates, uses, and can radiate radio fre-

quency energy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications.Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

NOTICE

This document and the data in it shall not be duplicated, used or disclosed to others for

procurement or manufacture, except as authorized by and with the written permission of,

Engineering Systems.The information contained in this document or in the product itself

is considered the exclusive property and trade secrets of Engineering Systems.Copyright

laws of the United States protect all information in this document or in the software

product itself.

NOTICE

Any use of this product is subject to the terms and acceptance of the Engineering

Systems Software Agreement. Please request a copy from Engineering Systems, and

review theagreement carefully.

6 PRO-2200 Intelligent Controller PRO22ICInstallation Guide

Disclaimer

Product Liability; Mutual Indemnification

In the event that a Customer receives a claim that a Product or any component thereof

has caused personal injury or damage to property of others, Customer shall immediately

notify Engineering Systems in writing of all such claims. Engineering Systems shall

defend or settle such claims and shall indemnify and hold Customer harmless for any

costsordamagesincludingreasonable attorneys’ fees whichCustomermayberequired

to pay as a result of the defective Product or the negligence of Engineering Systems, its

agents, or its employees.

Customer shall hold harmless and indemnify Engineering Systems from and against all

claims, demands, losses and liability arising out of damage to property or injury to

persons occasioned by or in connection with the acts or omissions of Customer and its

agents and employees, and from and against all claims, demands, losses and liability for

costs of fees, including reasonable attorneys’ fees, in connection therewith.

Unpacking Procedure

CAUTION

If any damage to the shipment is noticed before unpacking, a claim must be filed with the

commercial carrier.

All containers should be opened and unpacked carefully in order to prevent damage to

the contents.

The following steps are used to unpack equipment in preparation for installation:

1.Open the container and remove the unit(s) and all packing material.Retain the

container and all packing materials. They may be used again for reshipment

of the equipment, if needed.

2. Inspect the contents for shortage.If items are missing items, contact the order entry

department at800-323-4576.

3.Visually check contents. If damage is discovered, perform the following:

If shipping caused damage to the unit, a claim must be filed with the

commercialcarrier.

If any other defect is apparent, call 800-323-4576 for a return authorization.

PRO-2200 Intelligent Controller PRO22IC 7Installation Guide

Shipping Instructions

To ship equipment back to Engineering Systems:

1.Contact the customerservice department beforereturning equipment at800-323-4576.

Whencallingpleasehave available:

•A description of the problem or reason for returning the equipment.

•Original purchase order number, invoice number and if the unit is under warranty.

•A new purchase order number if the unit is not under warranty.

2. Obtain the Return Authorization Number (RMA) from the customer service

department at800-323-4576.

3.Show the RMA number on all packages shipped.Packages, which are not marked with

an RMA number will be refused at the factory and returned COD.

4.Carefullypacktheequipment for shipment. Use theoriginalpackingmaterialwhenever

possible.

Limited Warranty

All Products sold or licensed by Engineering Systems include a warranty registration card

which must be completed and returned to Engineering Systems by or on behalf of the end

user in order for Engineering Systems to provide warranty service, repair, credit or ex-

change. All warranty work shall be handled through the Customer which shall notify

EngineeringSystemsandapply for a ReturnMerchandiseAuthorization(RMA) number

prior to returning any Product for service, repair, credit or exchange. Engineering Systems

warrants that its Products shall be free from defects in materials and workmanship for a

period of two years from date of shipment of the Product to Customer.The warranty on

Terminals, Printers, Communications Products and Upgrade kits is 90 days from date of

shipment. Satisfaction of this warranty shall be limited to repair or replacement of Prod-

ucts which are defective or defective under normal use. Engineering Systems’warranty

shall not extend to any Product which, upon examination, is determined to be defective as

a result of misuse, improper storage, incorrect installation, operation or maintenance,

alteration, modification, accident or unusual deterioration of the Product due to physical

environments in excess of the limits set forth in Product manuals.THERE ARE NO

WARRANTIESWHICH EXTENDBEYONDTHIS PROVISION.THISWARRANTYIS IN

LIEUOFALLOTHERWARRANTIESWHETHER EXPRESS, IMPLIEDORSTATUTORY,

INCLUDINGIMPLIEDWARRANTIES OF MERCHANTABILITY ORFITNESSFORANY

PARTICULAR PURPOSE.NOREPRESENTATION ORWARRANTYOFTHEDISTRIBU-

TOR SHALL EXTENDTHE LIABILITY OR RESPONSIBILITY OFTHE MANUFACTURER

BEYONDTHETERMS OFTHIS PROVISION.IN NO EVENT SHALL ENGINEERING

SYSTEMS BE LIABLE FOR ANY RE-PROCUREMENT COSTS, LOSS OF PROFITS,

LOSS OF USE, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGESTO ANY

PERSONRESULTINGFROMTHE USE OF ENGINEERING SYSTEMS’PRODUCTS.

8 PRO-2200 Intelligent Controller PRO22ICInstallation Guide

Confidentiality

All software, drawings, diagrams, specifications, catalogs, literature, manuals and other

materials furnished by Engineering Systems relating to the design, use and service of the

Products shall remain confidential and shall constitute proprietary rights of Engineering

Systems and Customer agrees to treat such information as confidential. Customer shall

acquire no rights in the design of the Products or the related materials except to use such

information solely for the purpose of and only during the time it sells the Products.

Customer shall not copy the design of any of the Products or use or cause to be used any

Product design or related materials for its own benefit or for the benefit of any other party.

The covenants contained in this section shall remain effective throughout the term of this

Agreement and thereafter unless specifically waived by Engineering Systems in writing.

PRO-2200 Intelligent Controller PRO22IC 9Installation Guide

Description

The Intelligent Controller is the heart of the PRO-2200 and provides the real time

processing for the connected I/O interfaces. It holds the database for the subsystem

configuration and card holders, and the event log buffer in battery-backed memory.

Port 1 provides the standard connection to the host computer.

1. Port 1 may be set up as an RS-232 interface or an RS-485 interface. An optional

interface board (PRO22EN) converts the RS-232 output of port 1 into an Ethernet port

capable of supporting TCP/IP. If this interface board is present, this port must be set

up as an RS-232 interface and Jumper J-14 must be removed.

2. Ports 2 & 3 are RS-485 interfaces.

An on-board real time clock maintains the date and time, taking into account leap year

and accounting for global time zones and daylight savings time changes. The program is

stored in FLASH memory and may be downloaded through a serial port, allowing the

programtobechanged without physically changingboardcomponents.

Set Up

The controller hardware is configured with jumpers and a set of eight switches.These

jumpers/switches setup the memory chip size, port interface, end of line termination,

controller address, and baud rate. Please refer to the tables.

JumperSettings:

SREPMUJTATESDETCELES

6,5,4J 3-2 232-SRSI1TROP

2-1584-SRSI1TROP

41J FFO ORCIMXOBOC,TENREHTESI1TROP

NO584-SRRO232-SRSI1TROP

9J FFO NOTONSIROTANIMRETLOE584-SR1TROP

NONOSIROTANIMRETLOE584-SR1TROP

21J FFO NOTONSIROTANIMRETLOE584-SR2TROP

NONOSIROTANIMRETLOE584-SR2TROP

31J FFO NOTONSIROTANIMRETLOE584-SR3TROP

NONOSIROTANIMRETLOE584-SR3TROP

10 PRO-2200 Intelligent Controller PRO22ICInstallation Guide

DIP Switch Settings:

LED Operation

Thecontrollerusesthreeon-board LEDs to provide statusinformationduringitspower-up

sequenceandnormal operation.

EDOM

DELADELBDELCNOITPIRCSED

pu-rewoP ecneuqeS

NOFFOFFOputeserawdrah,pu-rewoPtratS

FFONONOesabataDgniraelCdnaMARgnitseT )BM/.ces5.xorppa(

FFONOFFO esabataDgniraelCTONdnaMARgnitseT .K.Osiesabatad)BM/.ces5.xorppa(

NONONOdnoces1rofdleh,etelpmocpu-rewoP

lamroN noitarepO

HSALF ecnohsalfdluohsdnarekcilftniafasahDELsihT .evitcasimetsysnehwdnocesyreve

HSALF noytivitcasierehtnehwhsalF 1troPtsoH

HSALF .troPO/InoytivitcasierehtnehwhsalF )3&2stroP(

8S7S6S5S4S3S2S1SNOITCELES

FFOFFOFFONO1SSERDDA

FFOFFONOFFO2SSERDDA

FFOFFONONO3SSERDDA

FFONOFFOFFO4SSERDDA

FFONOFFONO5SSERDDA

FFONONOFFO6SSERDDA

FFONONONO7SSERDDA

FFOFFOFFOFFO8SSERDDA

FFO WOLFERAWDRAHON:1TROP

LORTNOC

NO WOLFERAWDRAH:1TROP

LORTNOC

FFOFFO SPBK2.511

FFONO SPB006,9

NOFFO SPB002,91

NONO SPB004,83

FFO DROWSSAPON

NO DERIUQERNOGOLDROWSSAP

Other manuals for PRO22IC

This manual suits for next models

Table of contents

Other Honeywell Controllers manuals

Honeywell

Honeywell IPC5000 User manual

Honeywell

Honeywell CentraLine EAGLEHAWK NX User manual

Honeywell

Honeywell Excel Web XL1000A User manual

Honeywell

Honeywell AQUASTATIC L7224 Series User manual

Honeywell

Honeywell LYNX Touch L5200 Series User manual

Honeywell

Honeywell ControLinks R7999A User manual

Honeywell

Honeywell Pressuretrol L404 Series User manual

Honeywell

Honeywell SHC Series User manual

Honeywell

Honeywell Fire-Lite Alarms BG-12LPSP User manual

Honeywell

Honeywell ICON 100 SERIES User manual

Honeywell

Honeywell TPPL Modbus TCP Assembly instructions

Honeywell

Honeywell 9782 Series User manual

Honeywell

Honeywell EDC 200 Series User manual

Honeywell

Honeywell ML7295E User manual

Honeywell

Honeywell TRADELINE SV9501 User manual

Honeywell

Honeywell HON 372 Manual

Honeywell

Honeywell 900U02-0100 Operating manual

Honeywell

Honeywell ICON 100 SERIES User manual

Honeywell

Honeywell 10260S Series User manual

Honeywell

Honeywell TUXWIFIS User manual

Honeywell

Honeywell T775U Series User manual

Honeywell

Honeywell IAQ Poin User manual

Honeywell

Honeywell ZG 215N User manual

Honeywell

Honeywell AQ251 Installation guide

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual