Honeywell MIWI350 Operating instructions

MIWI350 Installation and Operations Guide

FD-610 | Version 2.01 | July 2019

Honeywell Process Solutions | Mercury Instruments

1280 Kemper Meadow Drive,

Cincinnati, OH 45240

855 251-7065 – United States & Canada | 302 669-4253 – Outside the United States

MI-TAC-Support@Honeywell.com | www.honeywellprocess.com

Information in this document is subject to change without notice. The software described in

this document is furnished under a license agreement or non- disclosure agreement. The

software may be used or copied only in accordance with the terms of those agreements. No

part of this publication may be reproduced, stored in a retrieval system, or transmitted in any

form or any means electronic or mechanical, including photocopying and recording for any

purpose other than the purchaser's personal use without the written permission of Honeywell

Process Solutions.

1 About MIWI350 1

1.1 Product Features 1

1.2 Power Supply Options 1

1.3 Abbreviations 1

1.4 Specifications 2

1.4.1 Power Input Sources and Options 2

1.4.2 Certifications 2

1.4.3 Environmental 3

1.4.4 Temperature Measurement 4

1.4.5 Pressure Measurement 4

1.5 Safety Measures 5

1.5.1 Safety and Hazardous Information 5

1.5.2 Conditions of Acceptability 5

1.5.3 Warning-Explosion Hazard/Avertissement - Risque d'explosion 5

1.5.4 Security Control Measures 6

1.5.5 Things to Remember 6

1.5.5.1 Usage of MIWI350 in Hazardous Areas 6

1.5.5.2 Installation and Commissioning of MIWI350 in Hazardous

Areas 6

1.5.5.3 Service, Maintenance, and Troubleshooting 7

2 Installation 8

2.1 Unpacking 8

2.2 Mounting Options 8

2.2.1 Device Marking 9

3 Mechanical Assembly and User Interface 10

3.1 Device Dimensions 11

3.2 Display Options 12

3.2.1 HMI User Interface 13

3.3 Gland Entries 14

4 Electrical Assembly 15

4.1 Input/Output Board 15

4.2 Power Distribution Board 15

4.2.1 Power Distribution Board connections Solar-Input/AC-DC input

with lead acid battery back up 17

4.2.2 Power Distribution Board jumper settings for Alkaline Battery or

DC input 18

4.2.3 Power Distribution board Output voltage and Jumper settings 19

4.3 Modem 19

5 Internal Wiring 20

5.1 Power Distribution Board and IO Board 20

5.2 Power Distribution Board and Modem 20

5.3 IO Board and Modem 21

6 Battery Installation 22

6.1 Lead-Acid Battery 22

6.2 Dual/Quad Alkaline Battery 23

6.3 Battery Life 24

7 Reference Drawings 25

7.1 MIWI350 with EC350 or ERX350 25

7.1.1 Wiring Dual or Quad Battery 25

7.1.2 Wiring Solar Power for MIWI350 26

7.2 MIWI350 as Power Box 27

7.2.1 Wiring Dual or Quad Battery for MIWIPCB 27

7.2.2 Wiring Solar Power for MIWIPCB 28

CONTENTS

7.3 MIWI350as Power or Communication Box 29

7.3.1 Barrier Connections 29

7.3.1.1 With CloudLink Modem 29

7.3.1.2 With RV50 Modem 32

7.3.2 Terminal Block Connections 33

7.3.2.1 With CloudLink Modem 33

7.3.2.2 With RV50 Modem 36

8 External Connections 38

9 Configuration Software 39

10 Orderable Kits 40

CONTENTS

Honeywell |1

1 About MIWI350

The MIWI350 is the latest offering in the Honeywell's EVC Product Line. This product line provides a more

competitive, reliable, and easy to use solution. It also provides a comprehensive selection of

communication hardware and power supply systems optimized to integrate with the Mercury Instruments

precision measurement instrumentation. It also includes software for Remote Monitoring and Data

Acquisition (RMADA), including alarm handling and notification.

The MIWI350 device typically includes:

An inbuilt Electronic Volume Corrector or Electronic Recorder (using electronics from the

Honeywell EC350/ERX350)

A built-in electronic cellular modem

1.1 Product Features

CSA C/US Class 1, Division 2, Group C & D

Compatible with MasterLink and Power Spring software

Available in UMB (Universal Mounting Bracket), Wall, Pipe, and Portable mounting options

Internal or External Mounted Display

Modem Power Control

Optional Backup Battery for Uninterrupted EVC Functionality

1.2 Power Supply Options

Solar Power with rechargeable Sealed Lead-Acid Battery (Refer to Quick Start Guide FD-612)

Battery - Alkaline Packs (Dual/Quad) (Refer to Quick Start Guide FD-613)

1.3 Abbreviations

CLR100 CloudLink 4G Modem

CLR110 CloudLink 4G M1 Modem

CORR.VOL Corrected Volume

CSA Canadian Safety Agency

ELV Extra Low Voltage

EVC/EC Electronic Volume Corrector

FCC Federal Communications Commission

HMI Human Machine Interface

I/O Input/Output

MIWI350 MI Wireless with Gas Volume Correction functionality

MIWIPCB MIWI Power and Communication Box

MPC Modem Power Control

1 About MIWI350

Honeywell |2

PD Board Power Distribution Board

SLA Sealed Lead Acid

UMB Universal Mounting Bracket

1.4 Specifications

1.4.1 Power Input Sources and Options

Configuration Source/Battery

Type

Voltage

(VDC)

Battery

Backup Type Backup Battery

Voltage (VDC)

Ampere

Hours

(Ah)

Battery Power

usage

Dual pack with

Supercap Alkaline 18 EVC & MODEM

Quad pack with

Supercap Alkaline 18 EVC & MODEM

Backup Battery Alkaline 6 Yes Alkaline 6 EVC Only as

backup

Solar with SLA

Battery Solar Panel 14.5 Yes Lead-Acid 12 7/21 EVC & MODEM

1.4.2 Certifications

Metrology

Measurement Canada (approval pending)

Haz Loc Certifications

CSA C/US Class I, Division 2, Groups C and D, T3C

IECEx Class I, Zone 2 Group IIB (approval pending)

Wireless Certification (IC & FCC)

Max RF POWER of the Modem

CLR100: 25dBm/316mW

CLR110: 23dBm/200mW

RV50 Modem: 32dBm/1.6W

Industry Canada: IC ICES-003

FCC: Part 15 B Class-A Digital device

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and;

2. This device must accept any interference received, including interference that may cause undesired

operation.

1 About MIWI350

Honeywell |3

Note: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates—and can radiate—

radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Caution: This equipment has been tested. It complies with Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation.

This device generates, uses and radiates radio frequency energy. If this device is not installed and

used in accordance with the instructions, it can cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in installation.

Note: The radiated output power of the device is far below the exposure limits. Nevertheless, use the

device in such a manner that the potential for human contact during normal operation is minimal.

1.4.3 Environmental

Maximum Operating Temperature Range (see listed configurations below):

-40 °F to +149 °F (-40 °C to +60 °C).

For your reference, the Operating Temperature Range for different assemblies are as below:

Ambient Temperature vs Assembly Code Table

Assembly Code

(ACXX)1Ambient Temperature Range (°C) Assembly Description2

AC01 -20 to 45 EVC, Modem, Barrier, and 21Ah SLA Battery

AC02 -15 to 45 EVC, Modem, Barrier, and 7Ah SLA Battery

AC03 -20 to 55 EVC, Modem, and Barrier3

AC04 -30 to 60 EVC and RV50 Modem3

AC05 -40 to 60 EVC and CL4G Modem3

1:The assembly code (ACXX) is also mentioned on the product Label for cross reference.

2:The assembly description indicates the max configuration supported for each assembly code. The

product assembly may vary based on the order.

3:Indicates the part which constraints the temperature range for each code.

1 About MIWI350

Honeywell |4

Humidity: 0-95% Non-Condensing

Type of Installation: Out Door Unit

Altitude: Less than 2000m

1.4.4 Temperature Measurement

Highly stable, solid state temperature sensor (Thermistor)

Range: -40 °F to +158 °F (-40 °C to +70 °C)

1.4.5 Pressure Measurement

Ambient temperature range of Pressure Transducer: -40°F to 158°F (-40° to 70°C)

Maximum pressures per pressure transducer type and range: 6 to 1500psig/30-1500psia

Type Pmax Units

Gauge 6 psig

Gauge 30 psig

Gauge 60 psig

Gauge 100 psig

Gauge 300 psig

Gauge 600 psig

Gauge 1000 psig

Gauge 1500 psig

Absolute 30 psia

Absolute 100 psia

Absolute 300 psia

Absolute 600 psia

Absolute 1000 psia

Absolute 1500 psia

1 About MIWI350

Honeywell |5

1.5 Safety Measures

1.5.1 Safety and Hazardous Information

MIWI350 complies with the general safety standards and regulations. However, failure to operate this

product as per the safety instructions available in this document may lead to hazards.

It is approved for use in hazardous areas (Class I Division 2). Different versions of MIWI350 are

available depending on the operating conditions. The permitted operating conditions are marked on

each product. Check the operating condition limits of MIWI350 before installing. You must be familiar

with the currently applicable electrical installation standards and regulations before installing and

operating MIWI350 in hazardous areas.

1.5.2 Conditions of Acceptability

1. The MIWI350 enclosure shall not be opened in the presence of ignitable concentration of explosive

gas atmosphere. Do not connect/disconnect the device unless the power has been switched off or

the area is deemed to be non-hazardous.

2. The externally powered configurations of the MIWI350 shall only be powered by a Class 2 ELV

circuit not exceeding 20V DC.

3. Use only Honeywell approved battery/battery packs with this product. Substitution of components

will void suitability for Class I Division 2.

Warning: Denotes an explosion hazard. Ensure you follow all instructions described in the warning

notification.

1.5.3 Warning-Explosion Hazard/Avertissement - Risque d'explosion

Do not Open, Disconnect, or Service in an area where an explosive atmosphere may be present. Any

service or repair shall be performed by qualified technicians only.

Ne pas ouvrir, déconnecter ou entretenir dans une zone où une atmosphère explosive peut être présente.

Toute réparation ou réparation ne doit être effectuée que par des techniciens qualifiés.

Honeywell recommends you to observe the warning information described in this document and other

generally applicable safety rules.

No warranty claims can be asserted if there is an unauthorized interference with the device.

You can use MIWI350 in hazardous areas, under permitted operating conditions. Ensure to

comply with the applicable laws and regulations, and company policies for the usage of

MIWI350.

Installation, commissioning, service, maintenance and troubleshooting of MIWI350 in

hazardous areas must only be done by specially trained and qualified staff.

Operate MIWI350 only if the instrument is completely intact.

1 About MIWI350

Honeywell |6

1.5.4 Security Control Measures

Security control recommendations are provided hereby to avoid unauthorized external access that may

result in the following:

Loss of system availability

Incorrect execution of controls causing damage to the plant, or theft or contamination of

product

The capture, modification, or deletion of data

Loss of data

Caution: The caution warns you of possible damage to property and provides instructions to avoid

damage to MIWI350.

Recommendations:

Use a state full firewall at the business network to restrict access from the business network to

process control network.

Use physical security for process control network systems. Take steps to implement and enforce

physical security of devices in network.

Do not allow the use of unauthorized removable media near to the device installation.

Use strong passwords on network equipment.

Prevent the use of unauthorized laptops on the process control network.

Ensure safe storage of installation media, license keys, and configuration information.

Prevent unauthorized tampering, the device must be physically protected in locked cabinets, and

logically protected with passwords.

The host device and software should be protected by anti virus and patch updated.

Restrict physical access to the device. Avoid access to local interfaces (RS232, Ethernet and

USB interfaces) of RV50 modem.

Avoid default credentials for RV50/CloudLink 4G Modem access. The user is strongly advised to

change the default password for device access.

Refer CloudLink 4G Modem User's Manual for security features in CloudLink 4G Modem and

refer RV50 data sheet for RV50.

1.5.5 Things to Remember

1.5.5.1 Usage of MIWI350 in Hazardous Areas

You may use MIWI350 in hazardous areas, under permitted operating conditions. Ensure to comply with

the applicable laws and regulations, and company policies for the usage of MIWI350.

1.5.5.2 Installation and Commissioning of MIWI350 in Hazardous Areas

MIWI350 must be installed and commissioned only by specially trained and qualified staff. The

installation of the intrinsically safe circuits must comply with the applicable local laws or regulations.

Operate MIWI350 only if the instrument is completely intact.

1 About MIWI350

Other manuals for MIWI350

Table of contents

Other Honeywell Controllers manuals

Honeywell

Honeywell Excel Web XL1000A User manual

Honeywell

Honeywell UltraKey Touch HJC4000 User manual

Honeywell

Honeywell touchpoint Pro User manual

Honeywell

Honeywell 301C User manual

Honeywell

Honeywell TBC2800 Series User manual

Honeywell

Honeywell T6590A User manual

Honeywell

Honeywell 5 Nm Series Operation manual

Honeywell

Honeywell Enhanced Micro TDC 3000 User manual

Honeywell

Honeywell Pneumatic Controls User manual

Honeywell

Honeywell RP920A-D Mounting instructions

Honeywell

Honeywell RA116A User manual

Honeywell

Honeywell Excel 10 User manual

Honeywell

Honeywell DBC2000E10 Series User manual

Honeywell

Honeywell WV8860C User manual

Honeywell

Honeywell Ex-Or MLSM2000A Installation and operation manual

Honeywell

Honeywell HR 40 User manual

Honeywell

Honeywell TrueZONE HZ311 User manual

Honeywell

Honeywell ZG 215VN User manual

Honeywell

Honeywell T775A User manual

Honeywell

Honeywell S9200U1000 User manual

Honeywell

Honeywell UDC3500 User manual

Honeywell

Honeywell 3 Nm Series User manual

Honeywell

Honeywell Touchpoint Plus Release Note

Honeywell

Honeywell TRADELINE SmartValve SV9602P User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual