Honeywell HC900 User manual

12/2018 Power Supply Rack Extension Kit # 51-52-33-149 1

HC900 Controller

Power Supply Rack Extension Installation

PS Rack Extension 900RPE - (current revision number)

Document Number Form: 51-52-33-149

Effective Date: 12/2018

Supersedes: 04/2005

Summary

• Optional field installation kit

• Installed on the rack next to the Primary

Power Supply

• Provides a rack extension to hold a 2nd

(Reserve) Power Supply and Power

Status Module per I/O Rack in order to

maintain power to the rack if the Primary

Power Supply fails

• Allows either Power Supply to be

replaced while maintaining power to the

rack using the other Power Supply

• Available for the 8-Slot and 12-Slot I/O

Racks

• Not available for the 4 Slot I/O Rack

8-Slot Rack

12-Slot Rack

8-Slot Rack

12-Slot Rack

Figure 1 PS Rack Extension Location

Procedure Follow the procedure in Table 1 to install a Power Supply (PS) Rack Extension to

an 8-slot or 12-slot I/O rack.

Table 1 – PS Rack Extension Installation

Step Action

1 Remove power to the rack to be extended.

2 Remove the rack from its mounting

and remove all modules from the

rack. Place the empty rack on a

flat surface with the back plate

down.

Controller CPU or Scanner Module Slot

Power Supply Slot

I/O Modules

Controller CPU or Scanner Module Slot

Power Supply Slot

I/O Modules

2 Power Supply Rack Extension Kit # 51-52-33-149 12/2018

Step Action

3 900R12-0200 (Standard Rack) can

be converted to 900R12R-0200

(Redundant power Supply). Locate

resistors R3,R4, R5 and R6 on the

I/O rack backplane. Cut and remove

the resistors, replace end cap.

4 Remove the screws from the

outside of the I/O rack side plate.

Retain the side plate.

JP21

I/O Rack

Side Plate JP21JP21

I/O Rack

Side Plate

5 Attach the PS extension rack to

the I/O rack with 4 of the screws

(SEMS M3 X 5.0 mm long)

provided in the kit.

Make sure that J3 on the PS

extension rack backplane

meshes with JP21 on the I/O

rack backplane.

J3 JP21

J3J3 JP21

6 Attach the side plate previously

removed from the I/O rack to the

PS extension rack using the 6

screws (Flat Head M3 x 6.0 mm

long) provided in the kit.

Note that the countersunk holes in

the plate should face outward.

J3 JP21

I/O Rack

Side Plate

previously removed

J3 JP21

J3J3 JP21

I/O Rack

Side Plate

previously removed

7 You will need to drill two mounting

holes (same size mounting holes

as the main rack) for the 900RPE

rack.

Place the updated rack in

position and mark the 2

mounting hole locations (top

and bottom of rack of the 900

RPE extension).

Remove the rack and drill the

mounting holes.

900RPE Rear

Mounting Plate

900RPE Rear

Mounting Plate

8 Re-install the Power Supply, CPU or Scanner and I/O modules.

9 If available, install the new Power Supply Module and Power Status Module into the 900RPE

rack.

10 Mount the updated rack assembly and connect a separate power source with disconnect to the

new power supply.

Other manuals for HC900

Other Honeywell Controllers manuals

Honeywell

Honeywell S9240F2051 User manual

Honeywell

Honeywell HR 80 User manual

Honeywell

Honeywell L482A User manual

Honeywell

Honeywell DCP 250 Installation guide

Honeywell

Honeywell L4188 User manual

Honeywell

Honeywell UDC100 User manual

Honeywell

Honeywell IAQ Poin User manual

Honeywell

Honeywell MS 10 Series User manual

Honeywell

Honeywell 191238-ZCS Operation manual

Honeywell

Honeywell CIPer 30 Operating instructions

Honeywell

Honeywell VK41 R Series User manual

Honeywell

Honeywell ControlEdge 900R04-0200 User manual

Honeywell

Honeywell PEHA D CDH8U5 Series Installation and operation manual

Honeywell

Honeywell W7752D2007 User manual

Honeywell

Honeywell T775 Series 2000 User guide

Honeywell

Honeywell ADEMCO Optiflex User manual

Honeywell

Honeywell 2RM7800L1087 Service manual

Honeywell

Honeywell S4565 Series User manual

Honeywell

Honeywell epc T5068A User manual

Honeywell

Honeywell GENT Mimic LED Driver Card Instruction manual

Honeywell

Honeywell TheraPro HR90 User manual

Honeywell

Honeywell HON 5020 Operating instructions

Honeywell

Honeywell SmartValve SV9510 User manual

Honeywell

Honeywell 10260S series Guide

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual