Honeywell DC1000 SERIES User manual

DC1000 Series Program Configuration Guide

Operation Mode Configuration 1

Configuration 2Program Mode

Set Up Mode

(1)

(3) (2) (2)

(3)

How to move from a MODE to another

(1) Press ‘SET’ key for 5 seconds, it grants access to ‘Configuration 1’ mode or return to

‘Operation’ mode from ‘Configuration 1’ mode.

(2) Press ‘SHIFT’ key for 5 seconds while pressing ‘SET’ key first, it grants access to

‘Configuration 2’ mode or return to ‘Operation’ mode.

(3) All parameters related to program configuration will be displayed next to parameters in

‘Operation’ mode. (* These parameters will be shown in program model only)

CAUTION

DO NOT access to ‘Set Up’ mode without instruction from techical assistant.

1. Program Function

The program function of DC1000 has 2 programs, and each program has Max. 8 segments.

Each segment can be defined as a period of “RAMP” or “SOAK” status.

2. Terminologies

Program : A pattern which consists of some segments

Segment : A RAMP status or a SOAK status

RAMP status : Status with changing SP

SOAK status : Status with fixed SP

3. Operation

3-1 Key functions

(START) : Start a program, ‘PRO’ LED to be flickered during the running operation

(WAIT) : Suspend the running program. ‘PRO’ LED will be turned on

+SET(JUMP) : Skip a current segment

+SET(RESET) : Stop the program running. ‘PRO’ LED will be turned off

3-2 Program Alarm Functions

Case 1) Segment Completion Alarm

ALD1 (Alarm Code for Alarm 1) = 07

AL1 (Alarm Condition) = 2 (‘2’ means Segment No.)

ALT1 (Alarm Time) = 00.10

Alarm Operation: Once Segment 2 is completed, Alarm 1 will become actuated

Case 2) Program Running Alarm

ALD1 = 17

Alarm Operation: During the program running, Alarm 1 will become actuated

* DC1000 does not have END, so the program will complete all the segments if segments are defined. If

the program should be finished earlier, set the ‘OUT’ of next segment to 0, then the program running will

be ended right after the previous segment is completed.

3-3 Link Function

PTN=1, Run Program 1 (Max. 8 segments)

PTN=2, Run Program 2 (Max. 8 segments)

PTN=0, Run Program 1 and Program 2 successively (Max. 16 segments)

* To have link function (PTN=0), PTN1 & PTN2 should be set first

Set point for Seg.5

SET

Start from Operation Mode

Set program pattern

Range: 0~2

Program segment display

‘Pattern’ – ‘Segment’

Program timer display

Range: 99hour 59min

Set point for Seg.1

Range: LSPL~USPL

Set time for Seg.1

Range: 0~99H59M

Set output for Seg.1

Range: 0~100% (if out=0, no program)

Set point for Seg.2

Set time for Seg.2

Set output for Seg.2

Set point for Seg.3

Set time for Seg.3

Set output for Seg.3

Set point for Seg.4

Set time for Seg.4

Set time for Seg.5

Set output for Seg.5

Set point for Seg.6

Set time for Seg.6

Set output for Seg.6

Set point for Seg.7

Set time for Seg.7

Set output for Seg.7

Set point for Seg.8

Set time for Seg.8

Set output for Seg.8

Set output for Seg.4

Range: (1,2,0)-(1~8)

Back to Operation Mode

Other manuals for DC1000 SERIES

Other Honeywell Controllers manuals

Honeywell

Honeywell SUPER TRADELINE L4064B User manual

Honeywell

Honeywell HA40 User manual

Honeywell

Honeywell Optiflex Assembly instructions

Honeywell

Honeywell MS7103 Series User manual

Honeywell

Honeywell HCE 40 Programming manual

Honeywell

Honeywell Sieger System 57 User manual

Honeywell

Honeywell HJZTP User manual

Honeywell

Honeywell 5 Nm Series Operation manual

Honeywell

Honeywell PEHA D CDH8U5 Series Installation and operation manual

Honeywell

Honeywell VR8300 User manual

Honeywell

Honeywell S05 Series User manual

Honeywell

Honeywell SW2 User manual

Honeywell

Honeywell HEGSA002 User manual

Honeywell

Honeywell UDC1200 MICRO-PRO User guide

Honeywell

Honeywell UDC3500 User manual

Honeywell

Honeywell UDC2800 User manual

Honeywell

Honeywell IAQ Poin User manual

Honeywell

Honeywell Elster Jeavons J125 User manual

Honeywell

Honeywell HR92UK User manual

Honeywell

Honeywell MP953A Operation manual

Honeywell

Honeywell PRO 2000 Series User manual

Honeywell

Honeywell Tema-Voyager Multi VMC Series User manual

Honeywell

Honeywell ControLinks R7999C User manual

Honeywell

Honeywell Lyric Instruction manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual