HIK VISION DS-K2M060 User manual

DS-K2M060 Secure Door Control Unit

User Manual

V1.0.0

UD01462B

Secure Door Control Unit Hikvision.com

User Manual

Any and all information, including, among others, wordings, pictures, graphs are

the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its

subsidiaries (hereinafter referred to be “Hikvision”). This user manual

(hereinafter referred to be “the Manual”) cannot be reproduced, changed,

translated, or distributed, partially or wholly, by any means, without the prior

written permission of Hikvision. Unless otherwise stipulated, Hikvision does not

make any warranties, guarantees or representations, express or implied,

regarding to the Manual.

About this Manual

This Manual is applicable to Secure Door Control Unit.

The Manual includes instructions for using and managing the product. Pictures,

charts, images and all other information hereinafter are for description and

explanation only. The information contained in the Manual is subject to change,

without notice, due to firmware updates or other reasons. Please find the latest

version in the company website (http://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properties of

Hikvision in various jurisdictions. Other trademarks and logos mentioned below

are the properties of their respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS

IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS

DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY

SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,

AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH

THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT

SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY

RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER

Secure Door Control Unit Hikvision.com

DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION,

OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE

TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS

IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE

THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE

LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE

PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE

LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to comply with the

limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the

interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that

may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too

are marked with "CE" and comply therefore with the

applicable harmonized European standards listed under the

EMC Directive 2004/108/EC, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this

symbol cannot be disposed of as unsorted municipal waste in

the European Union. For proper recycling, return this product

to your local supplier upon the purchase of equivalent new

equipment, or dispose of it at designated collection points. For

more information, see: www.recyclethis.info.

Secure Door Control Unit Hikvision.com

iii

2006/66/EC (battery directive): This product contains a battery

that cannot be disposed of as unsorted municipal waste in the

European Union. See the product documentation for specific

battery information. The battery is marked with this symbol,

which may include lettering to indicate cadmium (Cd), lead

(Pb), or mercury (Hg). For proper recycling, return the battery

to your supplier or to a designated collection point. For more information see:

www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Safety Instruction

These instructions are intended to ensure that user can use the product correctly

to avoid danger or property loss.

The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death.

Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Warnings

All the electronic operation should be strictly compliance with the electrical

safety regulations, fire prevention regulations and other related regulations in

your local region.

Please use the power adapter, which is provided by normal company. The

power consumption cannot be less than the required value.

Do not connect several devices to one power adapter as adapter overload may

cause over-heat or fire hazard.

Please make sure that the power has been disconnected before you wire,

install or dismantle the device.

When the product is installed on wall or ceiling, the device shall be firmly

fixed.

If smoke, odors or noise rise from the device, turn off the power at once and

unplug the power cable, and then please contact the service center.

Warnings Follow these safeguards

to prevent serious injury or death.

Cautions Follow these precautions to

prevent potential injury or material

damage.

Secure Door Control Unit Hikvision.com

If the product does not work properly, please contact your dealer or the

nearest service center. Never attempt to disassemble the device yourself. (We

shall not assume any responsibility for problems caused by unauthorized

repair or maintenance.)

Cautions

Do not drop the device or subject it to physical shock, and do not expose it to

high electromagnetism radiation. Avoid the equipment installation on

vibrations surface or places subject to shock (ignorance can cause equipment

damage).

Do not place the device in extremely hot (refer to the specification of the

device for the detailed operating temperature), cold, dusty or damp locations,

and do not expose it to high electromagnetic radiation.

The device cover for indoor use shall be kept from rain and moisture.

Exposing the equipment to direct sun light, low ventilation or heat source such

as heater or radiator is forbidden (ignorance can cause fire danger).

Do not aim the device at the sun or extra bright places. A blooming or smear

may occur otherwise (which is not a malfunction however), and affecting the

endurance of sensor at the same time.

Please use the provided glove when open up the device cover, avoid direct

contact with the device cover, because the acidic sweat of the fingers may

erode the surface coating of the device cover.

Please use a soft and dry cloth when clean inside and outside surfaces of the

device cover, do not use alkaline detergents.

Please keep all wrappers after unpack them for future use. In case of any

failure occurred, you need to return the device to the factory with the original

wrapper. Transportation without the original wrapper may result in damage

on the device and lead to additional costs.

Secure Door Control Unit www.hikvision.com

Contents

Chapter 1 Overview................................................................ 2

1.1 Introduction ................................................................. 2

1.2 Introducing the Appearance......................................... 2

1.2.1 Front View .............................................................. 2

1.2.2 Rear View (Dial-up)................................................. 3

1.3 Introducing Indicators .................................................. 4

Chapter 2 Installation............................................................. 6

2.1 Introduction of DIP Switch............................................ 6

2.2 Wiring Cables ............................................................... 8

2.3 Installing Secure Door Control Unit ............................ 12

Chapter 3 Wiring External Device ........................................ 14

Secure Door Control Unit www.hikvision.com

Chapter 1 Overview

1.1 Introduction

DS-K2M060 Secure Door Control Unit (hereinafter referred as “unit”)

can be applied to keep the door in the status before down when the

door is down or damaged.

DS-K2M060 Secure Door Control Unit is the interlayer between the

access control terminal and the lock, including the door contact, the

lock, the exit button, the Wiegand card reader and so on. It is much

safer to apply the secure door control unit with the access control

terminal.

1.2 Introducing the Appearance

1.2.1 Front View

The front view of DS- K2M060 Secure Door Control Unit is shown as

below:

Figure 1. 1 Front View of Secure Door Control Unit

Secure Door Control Unit www.hikvision.com

1.2.2 Rear View (Dial-up)

The rear view of DS- K2M060 Secure Door Control Unit is shown as

below:

Figure 1. 2 Rear View of Secure Door Control Unit

Table 1. 1 Description of Rear View

No.

Name

Cable Interface of RS-485, Power, LED Control, etc.

Tampering Prevention Switch

DIP Switch (For details, see Chapter 2.1

Introduction of DIP Switch)

Wiegand Interface

Secure Door Control Unit www.hikvision.com

1.3 Introducing Indicators

The Indicators of DS-K2M060 Secure Door Control Unit are POWER,

RUN, RX, TX, RELAY, SENSOR and BUTTON.

The following tables introduce the meaning of different indicator’s

status:

POWER:

Solid Red

The unit is powered on.

RUN:

Flicking Green

The tempering prevention switch is open.

Tempering alarm.

Solid Green

The tempering prevention switch is open. The

device is running.

RX, TX - RS 485 Communication Indicator:

Flicking Green

The RS 485 communication is built.

Solid Greed

The RS 485 communication is not built.

RELAY: Indicate the lock status:

Green

The indicator will be solid green for a while when

the opening door action is done. (The opening door

action includes swiping the card, remote opening

door and so on.)

Notes:

Make sure the unit is powered on.

Make sure the unit is connecting the lock.

SENSOR –Indicate the door contact status:

Green

The indicator is solid green when the door is open.

When the door is closed, the indicator is off.

Notes:

Make sure the unit is powered on.

Make sure the unit is connecting the door

contact.

Secure Door Control Unit www.hikvision.com

BUTTON –Indicate the Exit button

Green

The green light is on when press the Exit button.

When release the button, the green light will be

off.

Notes:

Make sure the unit is powered on.

Make sure the unit is connecting the Exit

button.

Table of contents

Other HIK VISION Security System manuals

HIK VISION

HIK VISION DS-PS1-I-WA User manual

HIK VISION

HIK VISION MV-PD030001-01 User manual

HIK VISION

HIK VISION DS-K1F600-D6E-F-S User manual

HIK VISION

HIK VISION AX PRO DS-PWA64-L-WE User manual

HIK VISION

HIK VISION DS-2TD6537T-50H4LX/W User manual

HIK VISION

HIK VISION DS-PEA102S User manual

HIK VISION

HIK VISION Blazer Express 16 User manual

HIK VISION

HIK VISION DS-KD8003-IME1 User manual

HIK VISION

HIK VISION Castle/Pyronix Euro 280 User manual

HIK VISION

HIK VISION DS-PEA12-P/ZJ User manual

HIK VISION

HIK VISION AX PRO Series Installation guide

HIK VISION

HIK VISION AX Series User manual

HIK VISION

HIK VISION DS-PF-E0204 Series User manual

HIK VISION

HIK VISION AX PRO User manual

HIK VISION

HIK VISION DS-PEA1-21 User manual

HIK VISION

HIK VISION DS-PHA20-P User manual

HIK VISION

HIK VISION DS-1901I Administrator Guide

HIK VISION

HIK VISION Pyronix EURO 46 V10 Owner's manual

HIK VISION

HIK VISION NB V6 User manual

HIK VISION

HIK VISION DS-K3B802BX Series User manual

HIK VISION

HIK VISION DS-PK-LRT User manual

HIK VISION

HIK VISION DS-TCG405-E User manual

HIK VISION

HIK VISION DS-PWA96-DB-WE User manual

HIK VISION

HIK VISION AX PRO M2 User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual