HIK VISION HiLook IPC-B149H User manual

Quick Start Guide

Network Bullet Camera

Network Bullet Camera·Quick Start Guide

Quick Start Guide

Any and all information, including, among others, wordings, pictures,

graphs are the properties of Hangzhou Hikvision Digital Technology

Co., Ltd. or its subsidiaries (hereinafter referred to be "Hikvision").

This user manual (hereinafter referred to be "the Manual") cannot be

reproduced, changed, translated, or distributed, partially or wholly,

by any means, without the prior written permission of Hikvision.

Unless otherwise stipulated, Hikvision does not make any warranties,

guarantees or representations, express or implied, regarding to the

Manual.

About this Manual

Pictures, charts, images and all other information hereinafter are for

description and explanation only. The information contained in the

Manual is subject to change, without notice, due to firmware updates

or other reasons. Please find the latest version in the company

website (http://www.hikvision.com).

Please use this user manual under the guidance of professionals.

Trademarks

and other Hikvision's trademarks and logos are the

properties of Hikvision in various jurisdictions. Other trademarks and

logos mentioned below are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE

PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND

Network Bullet Camera·Quick Start Guide

FIRMWARE, IS PROVIDED "AS IS", WITH ALL FAULTS AND ERRORS,

AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION,

ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO

YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF

BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR

DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS

PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY

OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF

PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL

NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET

SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL

RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS

PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE

APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT

THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

Network Bullet Camera·Quick Start Guide

FCC Information

Please take attention that changes or modification not expressly

approved by the party responsible for compliance could void the

user's authority to operate the equipment.

FCC compliance: This equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

Network Bullet Camera·Quick Start Guide

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized European

standards listed under the EMC Directive 2014/30/EU, the RoHS

Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with

this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

www.recyclethis.info

2006/66/EC (battery directive): This product contains

a battery that cannot be disposed of as unsorted

municipal waste in the European Union. See the

product documentation for specific battery

information. The battery is marked with this symbol,

which may include lettering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the battery to your supplier

or to a designated collection point. For more information see:

www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards

requirements.

Network Bullet Camera·Quick Start Guide

Safety Instruction

These instructions are intended to ensure that user can use the

product correctly to avoid danger or property loss.

The precaution measure is divided into "Warnings" and "Cautions"

Warnings: Serious injury or death may occur if any of the warnings

are neglected.

Cautions: Injury or equipment damage may occur if any of the

cautions are neglected.

Warnings

●Proper configuration of all passwords and other security settings

is the responsibility of the installer and/or end-user.

●In the use of the product, you must be in strict compliance with

the electrical safety regulations of the nation and region. Please

refer to technical specifications for detailed information.

●The power source should meet limited power source or PS2

requirements according to IEC 60950-1 or IEC 62368-1 standard.

Warnings

Cautions

Warnings Follow these

safeguards to prevent

serious injury or death.

Cautions Follow these

precautions to prevent

potential injury or material

damage.

Network Bullet Camera·Quick Start Guide

●Do not connect several devices to one power adapter as adapter

overload may cause over-heating or a fire hazard.

●Please make sure that the plug is firmly connected to the power

socket. When the product is mounted on wall or ceiling, the

device shall be firmly fixed.

●If smoke, odor or noise rise from the device, turn off the power

at once and unplug the power cable, and then please contact

the service center.

Cautions

●CAUTION: Hot parts! Burned fingers when handling the parts.

Wait one-half hour after switching off

before handling parts. This sticker is to

indicate that the marked item can be hot

and should not be touched without taking care. For device with

this sticker, this device is intended for installation in a restricted

access location, access can only be gained by service persons or

by users who have been instructed about the reasons for the

restrictions applied to the location and about any precautions

that shall be taken.

●Make sure the power supply voltage is correct before using the

camera.

●Do not drop the camera or subject it to physical shock.

●Do not touch sensor modules with fingers. If cleaning is

necessary, use clean cloth with a bit of ethanol and wipe it

Network Bullet Camera·Quick Start Guide

gently. If the camera will not be used for an extended period,

please replace the lens cap to protect the sensor from dirt.

●Do not aim the camera at the sun or extra bright places.

Blooming or smearing may occur otherwise (which is not a

malfunction), and affect the endurance of sensor at the same

time.

●The sensor may be burned out by a laser beam, so when any

laser equipment is in using, make sure that the surface of sensor

will not be exposed to the laser beam.

●Do not place the camera in extremely hot, cold (the operating

temperature shall be -30°C to 60°C), dusty or damp locations,

and do not expose it to high electromagnetic radiation.

●To avoid heat accumulation, good ventilation is required for

operating environment.

●Keep the camera away from liquid while in use.

●While in delivery, the camera shall be packed in its original

packing, or packing of the same texture.

●Regular part replacement: a few parts (e.g. electrolytic

capacitor) of the equipment shall be replaced regularly

according to their average enduring time. The average time

varies because of differences between operating environment

and using history, so regular checking is recommended for all the

users. Please contact with your dealer for more details.

●This equipment is not suitable for use in locations where

children are likely to be present.

Network Bullet Camera·Quick Start Guide

●CAUTION: Risk of explosion if the battery is replaced by an

incorrect type. Dispose of used batteries according to the

instructions

ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST

REMPLACÉE PAR UNE BATTERIE DE TYPE INCORRECT. METTRE

AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX

INSTRUCTIONS

●Improper replacement of the battery with an incorrect type may

defeat a safeguard (for example, in the case of some lithium

battery types).

●Do not dispose of the battery into fire or a hot oven, or

mechanically crush or cut the battery, which may result in an

explosion.

●Do not leave the battery in an extremely high temperature

surrounding environment, which may result in an explosion or

the leakage of flammable liquid or gas.

●Do not subject the battery to extremely low air pressure, which

may result in an explosion or the leakage of flammable liquid or

gas.

●If the product does not work properly, please contact your

dealer or the nearest service center. Never attempt to

disassemble the camera yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or

maintenance.)

Network Bullet Camera·Quick Start Guide

Table of Contents

1 Appearance Description ............................................................... 10

2 Installation.................................................................................... 15

Memory Card Installation.............................................. 15

Ceiling Mounting........................................................... 16

Mounting with Junction Box.......................................... 19

Install Network Cable Waterproof Jacket ...................... 22

3 Activate and Access Network Camera .......................................... 24

This manual suits for next models

Table of contents

Other HIK VISION Security Camera manuals

HIK VISION

HIK VISION DS-2XE6222F-IS User manual

HIK VISION

HIK VISION DS-2CS54D7T-IRS User manual

HIK VISION

HIK VISION DS-2DF8C435MHS-DELW User manual

HIK VISION

HIK VISION UD05108B User manual

HIK VISION

HIK VISION UD05531B User manual

HIK VISION

HIK VISION DS-2CE15F5P(N)-VFIR User manual

HIK VISION

HIK VISION DS-2DP8A440IXG-LEF/624(F0) User manual

HIK VISION

HIK VISION HiLook Series User manual

HIK VISION

HIK VISION DS-2CE56D0T-ITME User manual

HIK VISION

HIK VISION DS-2XE6825G0-IZHS User manual

HIK VISION

HIK VISION DS-2DT6223-AELY User manual

HIK VISION

HIK VISION DS-2CD6D24FWD-IZHS User manual

HIK VISION

HIK VISION DS-2CD51C5G0-IZS User manual

HIK VISION

HIK VISION PanoVu Mini Series User manual

HIK VISION

HIK VISION DeepinView DS-2XM6425G0/F Series User manual

HIK VISION

HIK VISION DS-2XT6645G0-LIZS/C15 User manual

HIK VISION

HIK VISION UD04331B User manual

HIK VISION

HIK VISION DS-2AE7230TI-A User manual

HIK VISION

HIK VISION DS-2CE11H0T-PIRLP User manual

HIK VISION

HIK VISION HWT-T120-P User manual

HIK VISION

HIK VISION DSHD21E2 User manual

HIK VISION

HIK VISION TurboHD H0T Series User manual

HIK VISION

HIK VISION DS-2CD4212F User guide

HIK VISION

HIK VISION UD01527B User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications