Harbor Breeze CANTLEY 41557 User manual

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 8 p.m., EST, Monday - Sunday.

ATTACH YOUR RECEIPT HERE

Purchase Date _________________________

Harbor Breeze® is a registered trademark

AR19032

Français p. 21

ITEM #43105036, 1607179

CANTLEY CEILING FAN

MODEL #41557

TABLE OF CONTENTS

Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Hardware Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Initial Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Standard or Angle Mounting Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Secondary Hanging System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Final Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Limited Lifetime Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Replacement Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Downrod 1

B Downrod Pin (preassembled to Downrod [A]) 1

C Downrod Clip (preassembled to Downrod [A]) 1

D Mounting Bracket 1

E Canopy (preassembled to Mounting Bracket [D]) 1

F Canopy Cover 1

G Motor Assembly 1

H Fitter Plate (preassembled to Motor Assembly [G]) 1

I Fitter Plate Screw (preassembled to Fitter Plate [H]) 3

J Motor Screw (preassembled to Motor Assembly [G]) 6

K Set Screw (preassembled to Motor Assembly [G]) 2

L Yoke Cover 1

M Light Kit 1

NBlade Arm 3

O Blade 3

P Mounting Bracket Screw (preassembled to Mounting Bracket [D]) 4

QBulb 2

R Glass Bowl 1

S Light Pan 1

T Light Pan Screw (preassembled to Light Pan [S]) 3

M N O

HARDWARE CONTENTS (shown actual size)

Wire Connector

Qty. 3

+ 1 extra

Blade Screw

Qty. 9

+ 1 extra

Blade Washer

Qty. 9

+ 1 extra

Pull Chain Extension

Qty. 2

Secondary Support

Screw

Qty. 1

Support Washer

Qty. 1

Screw Cap

Qty. 9

+1 extra

Secondary Spring

Washer

Qty. 1

Motor Screw

1 extra

JJ KK LL MM XX

BB CC DD

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the

product.

• Before you begin installing the fan, disconnect the power by removing fuses or turning o󰀨 the circuit

breakers.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

Code and ANSI/NFPA 70-199. Hire a qualied electrician or consult a do-it-yourself wiring

handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to

the oor and at least 30 in. from the end of the blades to any obstruction.

• The net weight of this fan is: 15.72 lbs.

DANGER: When using an existing outlet box, make sure the outlet box is securely attached to

the building structure and can support the full weight of the fan. Failure to do this can result in serious

injury or death. The stability of the outlet box is essential in minimizing wobble and noise in the fan

after installation is complete.

WARNING: To avoid personal injury, the use of gloves may be necessary while handling fan

parts with sharp edges.

WARNING: Using a full-range dimmer switch to control fan speed will cause a loud humming

noise from the fan. To reduce the risk of re or electric shock, do NOT use a full-range dimmer switch

to control the fan speed.

WARNING: To reduce the risk of re, electric shock or personal injury, mount the fan to an

outlet box marked “ACCEPTABLE FOR FAN SUPPORT” and use the mounting screws provided with

the outlet box. Most outlet boxes commonly used for the support of lighting xtures are not acceptable

for fan support and may need to be replaced. Consult a qualied electrician if in doubt. Secure the

outlet box directly to the building structure. The outlet box and its support must be able to support the

moving weight of the fan (at least 35 lbs.).

WARNING: To reduce the risk of re, electrical shock or personal injury, wire connectors

provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from

the fan. If your house wire is larger than 12-gauge and there is more than one house wire to connect

to the two fan lead wires, consult an electrician for the proper size wire connectors to use.

WARNING: To reduce the risk of re, electric shock or personal injury, do not bend the blade

arms when installing them, balancing the blades or cleaning the fan. Do not insert objects between

the rotating fan blades.

WARNING: To reduce the risk of personal injury, use only parts provided with this fan. The use

of parts OTHER than those provided with this fan will void the warranty.

SAFETY INFORMATION

CAUTION: Read all instructions and safety information before installing your new fan. Review the

accompanying assembly diagrams.

CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present.

CAUTION: Carefully check all screws, bolts and nuts on the fan motor assembly to ensure they are

secured.

CAN ICES-005 (B) / NMB-005 (B)

CAUTION: This device complies with Industry Canada license-exempt RSS standard(s). Operation is

subject to the following two conditions: (1) this device may not cause interference, and (2) this device

must accept any interference, including interference that may cause undesired operation of the

device.

PREPARATION

Before beginning the assembly of this product, ensure that all parts are present. Compare all parts

with the package contents list and hardware contents list. If any part is missing or damaged, do not

attempt to assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety

Glasses, Step Ladder, Wire Cutters and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure and Wiring Handbook

INITIAL INSTALLATION

1. Turn o󰀨 the circuit breakers and the wall switch to the

fan supply line leads.

DANGER: Failure to disconnect the power

supply prior to installation may result in serious injury

or death.

2. Determine the mounting method to use.

Standard Mounting is best suited for ceilings 8 ft.

or higher. For taller ceilings you may want to use a

longer downrod (not included).

Angle Mounting is best suited for angled or vaulted

ceilings. A longer downrod is sometimes necessary to

ensure proper blade clearance.

Important: If using the angle mount, check to ensure

the ceiling angle is not steeper than 16°.

Flushmount installation is not available for this item.

Closemount installation is not available for this item.

3. Ensure the blades (O) will be at least 30 in. from any

obstructions. Also check the downrod (A) length to

ensure the blades (O) will be at least 7 ft. above the

oor.

Standard Mounting

Flushmount Closemount

Angle Mounting

7 ft.

Minimum

30 in.

Minimum

INITIAL INSTALLATION

4. Loosen all four mounting bracket screws (P) on

mounting bracket (D), then completely remove the two

mounting bracket screws (P) from the round holes of

canopy (E). Set aside for later use.

Detach mounting bracket (D) from canopy (E).

5. Secure the mounting bracket (D) to the outlet box

using screws and washers provided with the outlet

box.

CAUTION: It is very important you use the proper

hardware when installing the mounting bracket (D) as

this will support the fan.

6. Remove motor screws (J) from the top of the motor

(G) and save for blade arm (N) attachment.

Standard

Mount

Angle Mount

STANDARD OR ANGLE MOUNTING INSTRUCTIONS

1. Remove the downrod pin (B) and downrod clip (C)

from the downrod (A). Then partially loosen the

set screws (K) in the yoke at the top of the motor

assembly (G).

2. Insert the downrod (A) -- or a longer downrod, if

required -- through the canopy (E) and yoke cover (L).

Thread the wires and braided cable from the fan up

through the downrod (A).

3. Slide the downrod (A) into the yoke of the motor

assembly (G), align the holes, then re-install the

downrod pin (B) and downrod clip (C). Secure with set

screws (K) and slide the yoke cover (L) down until it

rests on top of the motor assembly (G).

Braided

Cable

STANDARD OR ANGLE MOUNTING INSTRUCTIONS

4. Depending on the length of downrod you use, you may

need to cut the lead wires back to simplify the wiring. If

you decide to cut back the lead wires, it is suggested

you do so in the following manner: Take the lead wires

and make sure you have pulled them all the way

through the top of the downrod. Measure 8 inches of

lead wire, then cut the excess wire o󰀨 with wire cutters

(not included).

CAUTION: Do not cut the braided cable.

5. If you decided to cut back the lead wire in Step 10, strip

1/2 in. of insulation from the end of the wires. Twist

the stripped ends of each strand of wire within the

insulation with pliers (not included).

Note: If you did not cut back the lead wires in Step 10,

Step 11 is not necessary and you may proceed to Step

12 instead.

6. Install the ball end of the downrod (A) into the opening

of the mounting bracket (D). Align the slot in the ball

with the tab in the mounting bracket (D). Note: The

downrod (A) should not rotate if installed correctly.

DANGER: Failure to align the slot in the ball with

the tab could cause the fan to fall, which may result in

serious injury or death.

4Braided Cable

Slot

Tab

8 in.

This manual suits for next models

Table of contents

Other Harbor Breeze Fan manuals

Harbor Breeze

Harbor Breeze L1901 User manual

Harbor Breeze

Harbor Breeze E-CAF56OSB5CRC User manual

Harbor Breeze

Harbor Breeze CLRO52-II User manual

Harbor Breeze

Harbor Breeze E-TM52BNK5LED User manual

Harbor Breeze

Harbor Breeze 0228113 User manual

Harbor Breeze

Harbor Breeze TIEMPO E-TM52BNK5CS User manual

Harbor Breeze

Harbor Breeze 35063 User manual

Harbor Breeze

Harbor Breeze MZ44WW3LR User manual

Harbor Breeze

Harbor Breeze KINGSBURY 40190 User manual

Harbor Breeze

Harbor Breeze ANIVA BAY User manual

Harbor Breeze

Harbor Breeze ALTISSA User manual

Harbor Breeze

Harbor Breeze EDENTON L2B1 User manual

Harbor Breeze

Harbor Breeze E-WCK44ABZ5LKS User manual

Harbor Breeze

Harbor Breeze 35062 User manual

Harbor Breeze

Harbor Breeze EUK60MBK10LR User manual

Harbor Breeze

Harbor Breeze CGR60WW3LR User manual

Harbor Breeze

Harbor Breeze CEDAR HILL User manual

Harbor Breeze

Harbor Breeze CEDAR HILL User manual

Harbor Breeze

Harbor Breeze VALDOSTA L1120H-BK User manual

Harbor Breeze

Harbor Breeze AR09-52WHT User manual

Harbor Breeze

Harbor Breeze TILGHMAN WCK52LMW5N User manual

Harbor Breeze

Harbor Breeze GAT24MBK6LOD User manual

Harbor Breeze

Harbor Breeze CLASSIC STYLE 00819 User manual

Harbor Breeze

Harbor Breeze BTH44ABZC5C User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual